Production capacity:15-50 m3/hr Linear speed of conveyor belt:6m/min Motor power:5.5kw Product description: gd series box-type feeder is the feeding equipment used to balance and ration during brick production. The rotary mud making rod of this equipment can crush the comparatively large soft materials. As requirement
Production capacity:20-80 m3/hr Working width of chain plate:680mm Motor power:3kw (1) product description: gl series plate feeder is the intelligent automatic feeder of stepless speed regulation type which was designed and manufactured by our factory on the basis of absorption of advanced structure of intermittent feeder. The electric motor adopts ytps series variable-frequency motor and the speed-adjusting range is 100-912 / min. The control system can be set into automatic and manual modes according to users ' needs: the automatic state should match the material quantity control systems of automatic cutting and extruding machines of our factory so as to achieve the automatic control for whole process line; the manual state adjusts feeding speed by potential or control panel, which has simple and convenient operation and smooth-running chain plate; the built-in computer can automatically set acceleration and deceleration time according to the load state of motor to achieve í¦fuzzy optimal acceleration and decelerationí¦ control. (2) advantages: rational structure, low failure rate, convenient maintenance; the control system can automatically choose optimal operating mode according to the load state of motor, so that the motor operating loss is at lowest and can save electricity over 60 percent. It is the most advanced energy-saving feeding equipment in domestic building material industries. As requirement
Production capacity:14000-20000¿standard)block/hr Forming moisture:14%-18% Vacuum degree:n-0.092mpa Motor power:160+75+7.5(22)* Product description: "jinniu brand" series double stage vacuum extruder is the new brick making equipment designed and manufactured by our factory through several researches and use of domestic and international advanced experience. The main frame is welded by using high-quality steel, and has the features of rational structure, solid and durable properties, strong adaptability, low energy consumption, high efficiency, and easy maintenance and so on. It is the ideal equipment for production of various hollow brick, shale, coal gangue and coal ash. Advantages: all-steel welded structure, floating spindle, wear-resistant high-chromium alloy hub. The personalized rimer which is newly designed according to the nature of raw materials has the features of high output, low power and excellent performance As requirement
Working principle: There are two eccentric shafts rotating at high speed at the same time from opposite directions. Thus the strong centrifugal force is formed. The component forces of centrifugal force along with the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like curve, then fall down. The materials will move forward on the slope surface of the feeder.
It is a new invented machine in china. The eccentric vibrating exciter and tyre coupler are used in the machine. Advanced structure, great exciting force, low vibrating noise, easy maintenance and being endurable and sold feature the machine.
Four parts of the production line have been respectively awarded the national technological award and important national new product award. Customers speak highly of its advanced performance and excellent efficiency.íí Dtó=belt conveyor is connected to psx production line. We employ cad technology to optimize the structure of conveying mechanism. The reconstruction reduces the power consumption and abrasion of belt. No running deviation, low failure opportunity and easy maintenance feature this mechanism. Twenty sets of motors of this series are centrally controlled. All of them are of famous brand. The central controlled cabinet is amusing in appearance with modern sense. It is easy to control and maintain. The signals are clear. Psx manual sand-stone-making combines the domestic and foreign advanced technology of crushing, screening, conveying and controlling. This production line is of high efficiency. The granule shape and fineness modular are much more advantageous than others. Asz double channels closed circuit television monitoring system is introduced for this production line to achieve remote control. Electronic belt weighing device is emplyed. Electronic measurement lays a foundation for overcoming management difficulty, improving efficiency, lowing consumption, achieving remote automatic management computerized management. This production line possesses the following features: 1. Its investment is only 1/2~1/3 that of conventional production line; 2. The cost of ton-sand-stone is only 40~60% that of conventional production line. 3. Highly automatic production. Only 4 workers are needed for the single task.
This production line is composed of the feeder machine, jaw crusher, the counter-attack crusher, vibrating screen, belt conveyor and centralized electric control. It can be used crushing many kinds of materials aggregate like the limestone, granite, basalt, river stone and slag and so on. It is suitable to be applied to the water and electricity, building, building materials, highway, urban construction profession. Basic technical process introduction of stone production line Firstly, the stone from the mountain will be fed into the jaw crusher to be preliminary crushed. The finished product after be crushed thickly will be transported to the counter-attack crusher to be further crushed by the belt conveyor. Secondly, the stone after be crushed twice will be transported to the vibrating screen by the belt conveyor and the different specification gravel will be screened by the vibrating screen to satisfy the customer request. The unqualified gravel returns to the counter-attack crusher by the belt conveyer to be crushed once again and forms the close up to complete the crushing work. Stone material production line performance introduction This production line has the high automatization, high efficiency production, low cost, high income, the finished product granularity even, good grain size which conform to the national high speed materials requirement. This selection of equipment of the production line is mainly decided by the specification, output and the customer request. We can provide the customer with the comprehensive technical process and technical support also may design the non-standard parts and so on according to the installment condition of the site.
Specification of xf-hxc series sand dredger Item: Parameter Remarks Capacity Working weight 1-20t Total length 5-17m Hull length 3-15m Hull depth 0.3-1m Total width 1-2m Hull width 0.4-1m Main power 5-50kw Electrical engine or diesel engine Generator: 2-25kw Cutter diameter 3m Navigation ability No Operation system Electricity controlling Spare parts Diesel engine tools, oil seas, welders, cutter teeth Features 1. Simple, rapid assembly and dismantling 2. Spare parts and floating pipe available 3. Transportable by road, rail or sea 4. Reliable hydraulic system 5. Fresh water engine cooling system 6. Efficient fuel consumption 7. Simple operation --- the most advanced plc control system
Available from 30 M3 to 100 M3 / Hour Can be erected fast and easily. Engineered to perfection. Requires less maintenance and assures continuous performance. No compromise on quality, workmanship and designing. Hence you get best performance in toughest work conditions. Requires less installation area and minimum civil works. Hence less burden on customers pocket. Intelligent PLC based Automatic SCADA Control.
Available from 20 to 30 m3 per hour capacity. Rigid construction of main chassis fabricated from rolled mild steel material Pan type / twin shaft mixer for continuous and homogeneous mixing Replaceable liner tiles and tips in mixer Loading of aggregate, sand hopper by wheel loaders, conveyor or manually Fully automatic plant with electronic weighing of aggregate, sand, water, cement. Microprocessor based control panel with integral computerized batch controller to accommodate numerous mix recipes Maximum weighing accuracy. Plant requires electricity supply, water piping, aggregate and sand feeding inbuilt water and additive tank Easy transportation and shifting by towing also.
One of its kind innovative product Highest mobility Homogeneous mix is achieved due to unique design Feature of mixer. Wam make screw conveyor, vibrator & butterfly valve. Imported gearbox for mixer drive. Capacity: 15 & 20 m3 per hour
[Straw roof tile] 1. Straw color glazed roof tile is made of Crop stalks sawdust and all kinds of stones dust, but it is hard as steel, Flexural strength of Landscape orientation More than 4900N/M, Flexural strength of long direction More than 320N/M. water proof, damp proof, anticorrosion, antifoaming sound insulation, heat insulation High hardness and suitable toughness elasticity ageing resistance Longer life. 2. Can be nail, curium, convenient, process ability can mix construction adornment effect is good wait for a characteristic. 3. Straw complex tile is mainly used for roof waterproof heat insulation and decoration, can be widely used in factory ware house shopping mallsone-story house residential districts development zones and villas, also can make floor board and various house floor of the thermal insulation layer as well as various activities of the housing, balcony column board, etc. ...... 4. Not only environmental protection, a new kind of energy-saving building materials, you need not worry it will have radioactive or contains formaldehyde, benzene and so harmful substances. Numerous raw materials. To obtain material from local sources. The raw material of mainly contains straw of crop, sawdust and kinds of powder of stones, especially the straw of crop comes numerous in china, easy to gain . According to , the straw to be used can reached 7 hundred million ton, such as rice straw, broomcorn straw, corn straw, soybean straw, fruit shell, peanut shell, coco shell, sugar cane, flax, and soon. However, most of the kind of straw will be fired, that not only wasting the resources, but also polluting the environment. If the straw can instead of the wood or soil as a raw material, we just need less than 20%~35% straw to fill up flowing away of the wood and soil. In addition, straw using is the discard reused, reduced the cost largely. So the composite straw product will be low price. Meanwhile, producing will not be must has spacious marketing and strong competitions. Variety and Abundance The composite straw glazed tile can adjust its form and specification to adapt to the local marketing. Now, the following styles are popular in the market . Patterns and Colors: azure, red, purplish red, navy blue, crimson, orange, green, gray, black, white, and so on. Its divided into brightness and smoothness, and also make into granular and crude styles.
straw roof tile forming machine [Straw roof tile] 1. Straw color glazed roof tile is made of Crop stalks sawdust and all kinds of stones dust, but it is hard as steel, Flexural strength of Landscape orientation More than 4900N/M, Flexural strength of long direction More than 320N/M. water proof, damp proof, anticorrosion, antifoaming sound insulation, heat insulation High hardness and suitable toughness elasticity ageing resistance Longer life. 2. Can be nail, curium, convenient, process ability can mix construction adornment effect is good wait for a characteristic. 3. Straw complex tile is mainly used for roof waterproof heat insulation and decoration, can be widely used in factory ware house shopping mallsone-story house residential districts development zones and villas, also can make floor board and various house floor of the thermal insulation layer as well as various activities of the housing, balcony column board, etc. 4. Not only environmental protection, a new kind of energy-saving building materials, you need not worry it will have radioactive or contains formaldehyde, benzene and so harmful substances. Numerous raw materials. To obtain material from local sources. The raw material of mainly contains straw of crop, sawdust and kinds of powder of stones, especially the straw of crop comes numerous in china, easy to gain . According to , the straw to be used can reached 7 hundred million ton, such as rice straw, broomcorn straw, corn straw, soybean straw, fruit shell, peanut shell, coco shell, sugar cane, flax, and soon. However, most of the kind of straw will be fired, that not only wasting the resources, but also polluting the environment. If the straw can instead of the wood or soil as a raw material, we just need less than 20%~35% straw to fill up flowing away of the wood and soil. In addition, straw using is the discard reused, reduced the cost largely. So the composite straw product will be low price. Meanwhile, producing will not be must has spacious marketing and strong competitions. Variety and Abundance The composite straw glazed tile can adjust its form and specification to adapt to the local marketing. Now, the following styles are popular in the market . Patterns and Colors: azure, red, purplish red, navy blue, crimson, orange, green, gray, black, white, and so on. Its divided into brightness and smoothness, and also make into granular and crude styles. seaworthy packing
Description of products: This machine was designed for grinding and caring marble,widely use grinding and polishing stone floor in hotel ,building and villa etc. This machinery is stable in performance, light in handling,smooth operation,high efficiency,low noise, low failure rate,it's the Boutique in the stone caring machines. Performance 1.The handle and plate were made of aluminium alloy,not easy to damage,Strong and durable. 2.Adjust handle system adopt european stype new design,it's easy to handle. 3.This multifunctional machine Set floor washing,stone grinding,stone polishing in one . 4.Deploy accentuate iron ,it can Optional increase or decrease, flexible and easy to operate. 5.Multi-usage, fission type, it can instead of stair renovation machine after remove the grail. 6.In additional,you can choose the multi-function chassis which are suit for many kinds of abrasive(such as wet polishing pads,grinding pads, frankfurt magnesia and frankfurt brushes etc.) Weight:55KG Voltage:220V/50HZ Power:2HP Speed:175rpm Length of cable:12m Size:120*54*40cm
Main technical data: Control system mitsbushi plc computer control Cycle time 15-20s Total power 22.2kw Total weight 6t Pallet size 890x535x20mm Production capacity: Block product dimension(mm) pcs/per mould output/per shift(8hours) Hollow block 390x190x190 4 6000pcs Perforated block 240x115x90 12 18000pcs Muti-hole block 240x180x90 8 12800pcs Solid block 240x115x53 26 41600pcs Holland block 200x100x60 14 16800pcs Payment terms: l/c t/t Min.Order: 1 set/sets Delivery time:40 days
Tech data: 1. Vibration frequency: 2800-4800 per/min 2. Rating pressure: 20mpa 3. Power: 38 kw 4. Cycle time: 15-20 s 5. Bamboo pallet: 940mmíß860mmíß20mm 6. Weight: 10000 kg 30000kg
Tech data: 1. Vibration frequency: 2800-4800 per/min 2. Rating pressure: 20mpa 3. Power: 38 kw 4. Cycle time: 15-20 s 5. Bamboo pallet: 940mmíß860mmíß20mm 6. Weight: 10000 kg 20000kg
Tech data: 1. Vibration frequency: 3000 per/min 2. Power: 5 kw 3. Cycle time: 40 s 4. Bamboo pallet: pallet free Weight: 900 kg Dimension: 1550x1335x1580mm (loading: 6pcs/20í» container)
Dimension L x W x H 3650 x 1700 x 825 (mm) Production Capacity 15 - 25 (tons / hr) Stirring Barrel Length 2200 (mm) Motor Power 22 (kw) Weight í+ 2500 (kg) Features of Type TL-JBJ-290II 1. Specially made for the material preparation process with three functions of stirring, mixing with water & kneading. 2. Type TL-JBJ-290II works by adopt structures of two shafts separately rotating in opposite directions to treat the materials. (It is available to add hoppers according to different requirement, like type 290II-L) Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.
Dimension L x W x H 4,600 x 1,800 x 1,300 (mm) Production Capacity 5 - 8 (tons / hr ) (Adjustable by frequency converter) Degree of Vacuum í_ - 0.092 (Mpa) Augers Nominal Diameter íT400 / íT300 (mm) Extruding Pressure 3.0 (mpa) (Main / Vacuum Pump) Motor Power 37 / 5.5 (kw) Weight í+ 6000 (kg) Features of Type TL-CXJ-300B 1. Leading technology specially made for high-grade extruded wet-forming ceramic tiles and bricks, especially for making the split tiles, roofing tiles, special shaped tiles and clay bricks etc. 2. Casting-steel-structured machine body, high strength gear-box, special alloy steel augers etc., to ensure high quality and reliable of production. Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.
