Refractory FireBricks, Monolithic (Refractory Castable), Refractory Mortar, Refractory Cement, Bed Materials, Bauxite, Fireclay, Insulation Bricks and Blanket
Refractory products made of silicon carbide as the main raw material. The content of silicon carbide is 72% to 99%. Generally select black silicon carbide (SiC content more than 96%) as raw material, add binder (or no binder), through batching, mixing, molding and firing and other processes. Silicon carbide brick has high thermal conductivity, good wear resistance, thermal shock resistance and corrosion resistance. So carbonization. Silicon bricks are widely used in industry. It can be used for metallurgical steel tube lining, nozzle, plug head, blast furnace bottom and hearth, heating furnace without water-cooled slide rail, non-ferrous metal smelting distiller, distillation tower tray, electrolytic cell sidewall, smelting metal crucible; shed plate and flame insulation material of silicate industrial kiln; oil and gas generator and organic waste combustion furnace in chemical industry. Aluminum reduction cell lining for high-tech ceramic kiln furniture, molten aluminum conduit and ceramic kiln furniture, lower part of large and medium-sized blast furnace body, hearth and hearth, aluminum refining furnace lining, zinc distillation tank lining, etc.
Features: 1. High refractoriness. 2. Good spalling resistance and wear resistance. 3. Good corrosion resistance. 4. Good thermal shock resistance. 5. High mechanical strength. 6. High-temperature creep rate is low. 7. Good volume stability at high temperature.
The content of magnesium ramming material is above 84%, calcium oxide is controlled at 6%~8%, and ferric oxide is about 6%. Due to its high fire resistance, the service temperature reaches 1850~1950. With the use of superfine powder technology, make the material with high CaO magnesia and ultrafine iron oxide, can fully in the process of calcining synthetic reaction, generating distribution evenly throughout the material 2 calcium ferrite, and no obvious shrinkage phenomenon in the sintering process, ensuring the quality of the material of the sintering synthesis and improve the effect of the use of the material at the same time.After being sintered at 1600â?? for 3 hours, the compressive strength of the sample can reach 40~50MPa, which basically meets the compressive strength indexes required by nickel iron smelting.Therefore, after a certain temperature (not less than 1200â??), the material has high density, high compressive strength, good erosion resistance and volume stability. Magnesium ramming material is used in the bottom of the hot nickel iron furnace. Magnesium ramming material has good heat preservation and insulation property, which can reduce heat loss, improve furnace temperature, shorten smelting time and reduce smelting power consumption.The compactness of the forged furnace lining is good, which solves the local leakage phenomenon caused by the non-compactness of the formed magnesia brick masonry furnace lining. The use of magnesia ramming material to build the nickel-iron furnace has obviously improved the lining life cycle, reduced the consumption of refractory materials, and replaced the shaped materials with amorphous materials, which is over the water.
Brick walls are probably the most common building elements in the construction of a house. These walls form basic units for creating rooms that make up a house. The walls beside being space dividers are also structural elements that transfer the load of the roof to the ground. Brick walls are constructed on strip spread or raft foundations that support the walls. The walls are constructed using bricks and mortar. Our bricks are table moulded and of uniform shape and they are burnt in kilns. These bricks are used for important work of permanent nature. The surfaces and edges of the bricks are sharp, square, smooth and straight. These bricks are also identified by their uniform colour and a ringing sound when struck. These bricks do not chip and don’t have any cracks. Our bricks do not absorb water more than 1/6 of their weight. There is no salty residue when the bricks are dry. Features: 1. Perfect in size/shape, 2. Handmade Bricks 3. Red/Orange in colour, 4. Do not break when dropped from waist height, 5. Do not absorb more than 18 to 20% of their own weight if kept submerged for 1 hour under water 6. Suitable for precision work such as exposed Technical Specification Dimensions 222 mm x 101 mm x 76 mm Weight 2.5- 2.7 kg (approx.) Color Orange Water Absorption Mean- 8.6%
Good morning, I am looking for supplying handmade clay bricks in minimum quantity 20000 to maximum 2000000. The price will be cheap and negotioable. Starting factory price £200/thousend excluding shiping and carring cost. So please contact me for further details .
Product Description: We are a trusted name in manufacturing fire bricks which are a block of ceramic material used in masonry construction. These are sized to be layered with one hand using mortar. Our fire bricks are made from fire clay which is widely used as refractory insulating bricks to maintain insistent temperature. Thee bricks are extensively used in lining furnaces, kilns, fireboxes, and fireplaces.
Product Description: We are a trusted name in manufacturing fire bricks which are a block of ceramic material used in masonry construction. These are sized to be layered with one hand using mortar. Our fire bricks are made from fire clay which is widely used as refractory insulating bricks to maintain insistent temperature. Thee bricks are extensively used in lining furnaces, kilns, fireboxes, and fireplaces.
Product Description: We are a trusted name in manufacturing fire bricks which are a block of ceramic material used in masonry construction. These are sized to be layered with one hand using mortar. Our fire bricks are made from fire clay which is widely used as refractory insulating bricks to maintain insistent temperature. Thee bricks are extensively used in lining furnaces, kilns, fireboxes, and fireplaces.
Brick edge guard is an economical tool for automatic brick strapping systems at brick manufacturing industries. This product provides good performance in aligning the brick cube while the cube strapped with pet straps, it ensures a secure protection of brick cubes during the transportation. For 50mm width, the delivery quantity is 36/72 coils per a pallet. For 70mm width is 56/28 coils per a pallet. Strapping specifications A. 50 x 0.35mm B. 50 x 0.40mm C. 50 x 0.50mm D. 50 x 0.60mm E. 50 x 0.70mm F. 70 x 0.35mm G. 70 x 0.70mm **all items above are unprinted and black colour. Compatible strapping system brand: Gong-sheng Lingl Oms Orgapack Polychem Samuel Signode Our polypropylene strapping bands is tested by iso9001:2008 approval inspection systems to ensure the excellent running performance at customer sites. All testing equipments and instruments are aligned annually.
Refractory fire bricks, castables, mortar
As per standards. Loose & Pallets
High alumina firebricks are classified according to the alumina content which is from lowest 48% to highest 95%, manufactured from mineral of bauxite, corundum, etc. By mixing, press-forming, drying, sintering and machining. High alumina bricks feature stable mechanical strength and thermal shock resistance, with high refractoriness of no lower than 1880¡æ, high alumina bricks are commonly used as refractory lining exposed to heat directly or backup insulation linings in various types of industrial kiln or laboratory furnace. Wooden pallets
Fused cast azs block has strong glass corrosion resistance and high thermal shack stability. The products are adopting superior material, with process by special arc furnace forming it. This fuse cast technology got nearly no suffers from electrode pollution. Application Can be used at parts where chemical erosion is serious and temperature changes frequently, such as fire spurting mouth and regenerator joints, end port of furnace etc Wooden pallets
Refractoriness under load 0.2mpa (oc)t0.6¡¡§oo >1420 Main raw material: mullite, flint, etc.
Physical index¡¨ºo Porosity¡¨ºo12.0 ¡¡ìc 16.0 % Pressure¡¨ºo45 - 90 Refractoriness under load 0.2mpa (oc)t0.6¡¨ºo >1420 Main raw material: mullite, flint, etc.
Alumina as al2o3 30% - 40% Silica as sio2 50-60% max. Alkalies na2o + k2o Less than 1% Iron as fe2o3 Less than 2.5% Titanium oxide tio Less than 1% Physical properties Particle density 2.00 gm/cc Bulk density 1000-1100 kg/m³ Initial deformation temperature > 1300° c Maximum particle size 2.80 mm Minimum particle size 0.85 mm Note : other sizes also available on request 40 kg hdpe bags packing(in proper condition, without breakage)
Refractory bed material. Alumina as al2o3 30% - 40% Silica as sio2 50-60% max. Alkalies na2o + k2o Less than 1% Iron as fe2o3 Less than 2.5% Titanium oxide tio Less than 1% Physical properties Particle density 2.00 gm/cc Bulk density 1000-1100 kg/m³ Initial deformation temperature > 1300° c Maximum particle size 2.80 mm Minimum particle size 0.85 mm Note : other sizes also available on request 40 kg hdpe bags packing(in proper condition, without breakage)
Chemical analysis Measured typical values on a % dry basis Zro2 + hfo2 98.0 min Fe2o3 0.08 max Sio2 0.45 max Tio2 0.18 max Al2o3 0.35 max Cao 0.1 max Hollow ball: 0-7.5mm Product color: pale yellow Please contact us by email for the latest price. 1000kg per bag
Wantedbricks is a new building block design and manufacturing company. We have patented our own building block design and the product is now available for sale. The blocks have a wide range of uses. They can be used as ly toddlers and preschoolers, but also the adult. However, the traditional simple building blocks does not take much interesting to attract the adult. Now the wantedbricks change this situation. A new generation building blocks construct a lot of complex structure as you want, you can do your own artworks with this multi-functional construction blocks, to make decoration, or build a unique furniture, of course for toys to help kids explorer to their great creation. Skills benefits s 1.5kgs
