- High Quality Coverall - Manufactured in South Korea *FDA Approved
Code 52110: For surgical wound drainage Features Nature rubber formation. Non-sterile. Smooth tubing wall, both outside & inside. X-ray opaque, ready to implant. Peel apart package. Length : 18(12 is also available) Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1
Code 85750: Anchor wound dressings on fragile or at-risk skin Features Anchors wound dressings on fragile or at-risk skin. Secures tubing and devices. Gentle yet secure, waterproof and snug fit. Color: Flesh Tear type: Easy-tear or normal Size: 2.50 cm x 150 cm 5.00 cm x 150 cm
Code 85300: Made of polyethylene with acrylic coating. Features Made of polyethylene with acrylic coating. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Perforated for easy tearing by hand. Thin, flexible and strong adhesive Material: Polyethylene Size: 1.25 cm x 9.14 M (1/2''x10yds) 2.50 cm x 9.14 M (1''x10yds) 5.00 cm x 9.14 M (2''x10yds) 7.50 cm x 9.14 M (3''x10yds)
Code 82700: Moisturizes, lightens the scar, hypoallergenic Features 1. Flesh color silicone sheeting with hypoallergenic adhesive. 2. Snug-fitting, washable and reusable for more than 15 times. 3. Pain-free and easy removal. Size: 1 cm x 10 cm x 1 sheet Material: PU, silicone gel
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89600: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water, Materialï¼? PU film Size: 6 x 7 cm (2.4''x2.8'') 10 x 13 cm (4''x5.1'')
Code 81100: Non-adherent absorbent pad Features 1. Porous non-adherent film on both side with absorbent pad in the middle . 2. Absorbent pad absorbs drainage away from wound. 3. Non-adherent film will prevent absorbent pad sticking to wound Color: White Size: 5 x 5 cm (2''x2'') 7.5 x 7.5 cm (3''x3'') 10 x 10 cm (4''x4'')
Code 82220: Non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. Designed for thumbs,toes, finertips and finger joints where bandages do not hold well. 3. Individually wrapped and gamma sterilized. Color: White Size: 4.5 x 5 cm (1.8''x2'') 3.8 x 7.6 cm (1.5''x3'')
SpO2 cables are specifically designed to connect the SpO2 sensor, typically placed on a patient's finger or earlobe, to the monitoring device. These cables transmit the optical signals captured by the sensor to the monitor, where the data is processed and displayed as oxygen saturation levels.
Special Feature Long Lasting Item Weight 0.9 Pounds Item Dimensions LxWxH 14 x 10.5 x 8.5 inches Product Benefits Long lasting proven pain relief formula MOQ: 1 carton
Medical cable assembly for electrosurgical pencil
Medical grade PET, PETG blister, tray and HDPE cleancut card for medical device packaging.
Wrist Splint (Conventional) AJY-S05 For wrist or proximal forearm fractures, functional position fixation in wrist arthroplasty, and rest position system for wrist arthritis and other lesions Dynamic or lunate dislocation and colles fracture fixation. 270*192*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Wrist Splint (Stable) AJY-S10 For wrist or distal forearm fractures, functional fixation of wrist arthroplasty. However, the dorsal side of the wrist needs to be exposed (if there is a wound on the volar side). 275*175*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Finger fixing splint (tubular type) AJY-S01 Tubular finger fixation for phalangeal fractures, knuckle dislocations, ligaments, tendon injuries and fixation. 190*120*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Wrist Splint (Simple Type) AJY-S04 For wrist soft tissue injury, wrist arthritis and functional position fixation. 303*193*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Trach Care Tray
Bucket, 2.5 gallon
