Product Category- Construction Chemicals Product Name- Scottproof Water seal Description of the product- Colourless waterproofing coating for vertical walls, stone facades, mangalore tiles and porous slabs Area of Use (Application)- 1. Cement painted surface concrete mortar clay brick surfaces etc. 2. Natural and artificial stones 3. Mangalore tiled roofs" Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. An economical water repellant coating 2. Does not change the appearance of the exterior decorative coating 3. Prevents entry of moisture into the wall but allows moisture to evaporate out 4. Prevents efflorescence" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Scottproof Tank seal Description of the product- High performance elastomeric cementitious waterproof coating Area of Use (Application)- Brush applied waterproofing for portable water tanks, septic tanks, swimming pools etc. Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- "1. Elastomeric flexible coating that bridges cracks upto 2 mm width with an elasticity of 40-50% 2. Four times thicker ordinary polymer cement coating with dry film thickness of 1 mm 3. Certified for potable water contact by CFTRI" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Scottproof Sun Kool Description of the product- Reduces temperature of building structure up to 5% - 7% Area of Use (Application)- 1. Concrete, Fibre 2. Roofings of residential and commercial complexes 3. Cold storages 4. Fuel and water tanks" Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Primer for internal and external surfaces 2. Based on chemically inert polymers, suitable for high alkaline substrates 3. Provides deep penetration thus imparts excellent substrate adhesion" Area of application- Exterior
Product Category- Construction Chemicals Product Name- Krack seal Powder Description of the product- Filling of normal plaster cracks upto 2mm wide Area of Use (Application)- Repairing of internal and external cracks in plastered surfaces upto 5mm size Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Strong adhesion to common building substrated 2. Does not contain solvent thus no emission of vapors 3. Acts as a surface leveller before painting, it reduces paint consumption and increases the life of the paint, making it economical" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Krack seal XL Description of the product- Filling of normal plaster cracks upto 5 mm wide Area of Use (Application)- Internal and external plastered brick masonry surfaces wall cracks of upto 5 mm width Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Flexible & UV resistant, does not crack, accomodates minor movements in cracks 2. Over coatable after 24 hrs by any type of polymer based paints 3. Excellent adhesion with cementitious surfaces" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Plaxem Description of the product- Admixture for concrete with waterproofing properties Area of Use (Application)- Concrete and plasters Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. This product is designed to give most satisfactory waterproofind performance even in poorly graded cement/concrete mix. Its highly economical 2. Increases workability and cohesiveness of the mix 3. Reduces water cement ratio and increases the compressive strength" Area of application- Concrete
Product Category- Construction Chemicals Product Name- Scott proof POM Description of the product- Waterproofing additive Area of Use (Application)- All plaster and mortar Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Excellent waterproof powder and plasticizer for mortar 2. Minimum rebound loss 3. Eliminates bleeding and segregation" Area of application- Plaster
Product Category- Construction Chemicals Product Name- Rapidite Description of the product- For extra rapid setting Area of Use (Application)- All plaster and mortar Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Quick setting 2. Rapid hardening and waterproofing compound for cement/concrete" Area of application- Plaster
Product Category- Construction Chemicals Product Name- Scottproof 200 Description of the product- Filling of normal plaster cracks upto 5mm wide Area of Use (Application)- Concrete and plasters Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Remarkable improvement in flow and workability 2. Most economical waterproofing additive for plaster and concrete 3. Reducing water cement ration an increases the compressive strength" Area of application- Concrete & Plaster
Product Category- Construction Chemicals Product Name- Zoriscott Clear Water base Description of the product- Transparent coat for pavers and painted surface Area of Use (Application)- "1. Paver block, painted surface, mosaic tiles, vertical and horizontal painted walls 2. Easy application by brush or spray" Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Single component, ready to use concentrated liquid material 2. Excellent adhesion properties for ceramics 3. Excellent gloss with low dirt pick up" Area of application- Stones & Marbles
Toluene Diisocyanate TAR / TDI TAR Uses - Curing Agent in Construction / Paint Industry Bulk Volumes GCC Origin
one of the leading Manufacturer, Supplier and distributor of construction chemicals. We supply our products all over such as we provides number of products in waterproofing segments ie Waterproofing Material, Waterproofing Chemicals, concrete waterproofing admixture, Waterproofing Service, Waterproof Membranes, Waterproof Elastomeric Coatings, Waterproof Coatings, Sika Waterproofing Chemicals, Fosroc Waterproofing Chemicals, waterproof elastomeric coating with various brands in waterproofing chemicals suppliers in which includes
Is a high-performance polycarboxylate superplasticizer developed by HUAXUAN HIGH TECHNOLOGY to meet the needs of different concrete slump protection. This series of water reducers have excellent slump retention and extremely high water reduction rate through molecular structure optimization design, which greatly improves the plastic index of fresh concrete and improves its pumping and construction properties. At the same time, the strength growth and structural development of hardened concrete have also been significantly improved. The product has a low content and strong adaptability to various concrete raw materials, and it can meet various requirements for concrete slump protection under pumping, medium and low slump, long-term transportation, and high-temperature construction conditions. By adding HUAXUAN HIGH TECHNOLOGY�® KH-206 can obtain the following results: (1) Excellent slump retention: within a certain period of time, the fluidity increases by time, till it increases to the maximum value. (2) Ultra-high water reduction rate: the water reduction rate is as high as 40% or more; (3) The concrete has good mobility, easy pouring, and easy construction; (4) Good workability: no segregation and no bleeding, which is conducive to concrete strength growth and structural development. (5) Wide adaptability: adapt to various cements and admixtures. Appearance:light yellow liquid Solid content:50% Application: It is suitable for concrete with high requirements for slump retention, such as large-volume concrete, long-distance conveying concrete and pumping concrete. It is especially suitable for maintaining concrete slump under long-term transportation and high-temperature construction conditions,also it is suitable for various Water conservancy, marine engineering, ports, transportation, electric power and other national key projects that require high concrete performance,especially recommended for high-strength high-performance concrete, super-fluid, earthquake-free and self-compacting concrete. How to use: It is recommended to be used in combination with other water-reducing polycarboxylic acid water-reducing agent mother liquor. The ratio of water-reducing mother liquor to slump-preserving mother liquor is better to be (90%-50%): (10%-50%), and the solid content after compounding should be 0.05%~0.25% of the cementitious material.After being diluted in proportion, add it to the concrete mixer together with water,and youâ??ll see better effects when adding retarder of 1-4% of the quality of the water reducing agent. If you are interested in our company's products, you can contact us, the following is our contact information:
HUAXUAN HIGH TECHNOLOGY�® KH-204 Is a new version high-performance polycarboxylic superplasticizer. Compared with other high efficiency water-reducing agents,it has the properties of ultra-high water reduction,low shrinkage,low bleeding rate and small avalanche loss. Ultra-high water reducing rate:up to 40%,particularly significant in high-grade concrete (above C50).In the same condition,it costs less material to get the same effect. Excellent plastic retention: Excellent plastic retention performance: Because the steric hindrance of the extended polymer side chain effectively hinders the secondary agglomeration between cement particles, the product has high dispersion and can maintain this performance for a long time. Good early strength and strengthening effect: under the same conditions, the concrete mixed with this product has a higher early strength and strengthening effect than other types of superplasticizers. Significantly improve the durability of concrete: The product has a low alkali content, and because itâ??s an air-entraining type high efficiency water reducing agent, it significantly reduces the alkali-aggregate reaction of concrete and improves the freeze-thaw resistance of concrete. Stability: The concrete shrinkage and creep properties will be effectively improved after adding the product,in the meanwhile, it gains a good stability, so there are lower risks of cracks.
Superplasticizer As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heatsummer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.The new raw material is researched and produced by ourselves, which is mainly used in theproduction of polycarboxylate superplasticizer products.
AMPS FLUID LOSS ADDITIVE Risol FL1300S PHYSICAL AND CHEMICAL INDICATORS Appearance Bulk Density, g/cm3 Water-Solubility 0.315mm Sieve (45 mesh) Residues, % White or faint yellow powder 0.70±0.20 100%
AMPS Fluid Loss Additive Risol FL 5000S Product Description Risol FL5000S is a water-soluble synthetic viscosifying polymer,which can control fluid loss through Adsorption and aggregation reducing pore size and enhancing viscosity of water phase. Risol FL5000S fluid loss additive is non-retarding Polymer, which makes it ideal for lightweight cementing compositions that typically have long thickening times. The additive promotes good compressive strength at low temperatures, and it performs well in seawater and fresh water.It can be used with seawater, and high concentrations of salt. Specially designed for the application in low density cement slurry system. Generates thickening effect on the cement slurry and enhances cement slurry's suspension stability. cement slurry system is stable with little free fluid. It provides exceptional filtrate control when used with retarders at bottom hole circulating temperatures up to 160C. Technical Datasheet Requirement Specification Fluid loss, ml/(90 C,6.9MPa,30min) 100 Thickening time, min/ (90C,35.6MPa) 60~160 Initial consistency, Bc 30 Compression strength, Mpa, /(105C,20.7MPa,24h) 14 Free fluid, % 1.5 Cement slurry:API Class G cement (HSR): 800g, distilled water: 352g, Risol FL 5000S: 6.4g,Risol RT100S:2g, defoamer:1.6g. Features Appearance : Colorless or light yellow powder; Temperature range: 30 C-160C (BHCT); Normal dosage: 0.6%-1.5%(BWOC); Package:25kg/bag; Guarantee Period: 1years.
1.0 Lignocellulose Action in Building Material 1.1 Strong thickening and strengthening functions 1.2 Lignocellulose has good cross linking. The fiber will be linked like a blanket if mixed with other materials 1.3 The structure can lock water or other liquid inside. 1.4 Long fiber, stronger thickening 2.0 Application Dry Mixed Mortar Construction Mortar Thin Set Mortar Skim Coat Thermal Insulation and Finishing System EIFS Compounds, Mortar Cement, Lime Plaster , Skim Coat, Stucco, Adhesive Mortar , Self ?Leveling , Paints Dosage for reference : 0.1 % - 0.5 %
Superplasticizer
There are many industries in the leading refractory market who is constructing a lot of alumina mortars in India but Imperial World Trade continues leading of others due to its high quality and regular production of its products. We manufacture 70 K mortar using special quality of raw material stuff in our tremendous plant where state of the art of technology is functioned.
