We can provide our Customers with Finest Precision Quality Stainless Steel Wires for various Cold Heading applications like Bolts, Nuts, Screws, Rivets, Nails, Pins etc. Grades - AISI 304, 304L, 304HC, 304Cu2, 302HQ, XM7, 304J3s, 316, 316L, 316LCu, 430 etc. Size Available - 0.70 to 18 mm Surface Finish - Soft Annealed, Bright Drawn, Bright Soft
We can provide our Customers with Finest Precision Quality Stainless Steel Wires. Stainless Steel Fine Wires suitable for Weaving, Braiding, Knitting etc. Grades - AISI 304, 304L, 316, 316L, 316Ti, 310, 321, 314 Size Available - 0.10 to 0.8 mm Surface Finish - Bright Annealed / Bright Drawn Spool Size - DIN 100, 125, 160, 200, 250, 355 etc.
We can provide our Customers with Finest Precision Quality Stainless Steel Wires. Stainless Steel General Purpose Wires. Grades - AISI 200, 300, 400 Series SS, Nickel Alloy & Duplex Steel. Size Available - 0.10 to 18 mm Surface Finish - Matte or Bright Material Type - Soft Annealed, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard
Carbon Steel & Stainless Steel Cut Wire shot are widely used for shot peening to give compressive residual stress in the surface layer of components for fatigue life enhancement and suppression of stress corrosion cracking as well as cleaning and polishing of the surface of metal parts, deburring of die cast parts, is of reusable and recyclable, the working life is 1000 times of glass bead, can produce very bright surface, but creat much less dust than glass beads, natural and artificial corundum abrasives. The hardness is 20-40HRC. Chemical Composition (% by weight) C Cr Ni Si Mn S P max max max Stainless steel cut wire shot (SUS202) 0.15 max 17.0-19.0 4.0-6.0 1.0 7.5-10.0 0.03 0.06 stainless steel cut wire shot (SUS304) 0.07max 17.0-19.0 8.0-10.0 1.0 2.0 max 0.035 Stainless steel cut wire shot (SUS316) 0.08 max 16.0-18.5 10.0-14.0 1.0 2.0 max 0.035 Stainless steel cut wire shot (SUS430) 0.12 max 16.0-18.0 0 0.75 1.25 max 0.035 Carbon steel cut wire shot 0.45-0.75 - - 0.1-0.3 0.3-1.2 0.05 0.05 Available Sizes Material stainless steel cut wire shot Conditioned stainless steel cut wire shot (SUS304) carbon steel cut wire shot (SUS430) (SUS304) Size(mm) 300-450 HV 400-500 HV 500 HV HRC45-50 0.30 v v v - 0.35 v v v 0.40 v v v - 0.50 v v v - 0.60 v v v - 0.70 v v v - 0.80 v v v v 0.90 v v v v 1.00 v v v v 1.20 v v v v 1.40 v v v 1.5 v v v v 2.0 v v v v 2.5 v v v v
Stainless steel wires Wires for Cold Heading & Fasteners: Wires for Ball Making Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. Various grades of Wires are available for cold heading & fastener applications. Supply conditions include soft annealed & soap drawn wires for production of nails, nuts, bolts & screws. Wires for Spring: Soap coated & bright drawn wires are produced with controlled chemistries to ensure forming consistency and reproducibility. Wires are produced as per ASTM A313 and supplied on metal carriers and spools. Heat Resistant Wires: Grades are produced with controlled chemistry for better heat resistance. Wire rod, bars & wires are available for various applications including refractory anchors, conveyor belts for food processing industry, cold heading & fasteners. Wires for Ball Making: Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. Wires for Braiding, Weaving, Knitting & Filters: Bright and matt finish wires are available in sizes 0.20 mm to 5.0 mm with consistent surface finish and high corrosion resistance properties. Wires are supplied on spools and in coils. EPQ Wires: Aesthetically superior wires are produced from 1.6 mm to 8.0 mm for electro-polishing & electro-plating processes for manufacturing White Goods and Consumer Durables.
Overview Supply Condition Soft Annealed (Matt/Bright) 1/4 Hard, 1/2 Hard, Full Hard, Spring Hard, EPQ Size Range 0.20 mm to 18.0 mm Coil Weight 10 kg to 650 kg Packing Coils with / without metal carriers Core packing with pallet Drum packs Cheese wound / Euro Coils / Spools Fine Wire Size : 0.200 mm to 0.800 mm Surface Finish : Bright Condition : Soft Annealed, Bright Hard Drawn Plastic Spool Size : DIN 160/DIN 200/DIN 250 Weight 4-6 Kg./10-12 Kg/18-20 Kg.
Stainless Steel Wires
â?¢ Stainless steel wires ï?¼ Wires for Cold Heading & Fasteners: Wires for Ball Making Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. Various grades of Wires are available for cold heading & fastener applications. Supply conditions include soft annealed & soap drawn wires for production of nails, nuts, bolts & screws. ï?¼ Wires for Spring: Soap coated & bright drawn wires are produced with controlled chemistries to ensure forming consistency and reproducibility. Wires are produced as per ASTM A313 and supplied on metal carriers and spools. ï?¼ Heat Resistant Wires: Grades are produced with controlled chemistry for better heat resistance. Wire rod, bars & wires are available for various applications including refractory anchors, conveyor belts for food processing industry, cold heading & fasteners. ï?¼ Wires for Ball Making: Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. ï?¼ Wires for Braiding, Weaving, Knitting & Filters: Bright and matt finish wires are available in sizes 0.20 mm to 5.0 mm with consistent surface finish and high corrosion resistance properties. Wires are supplied on spools and in coils. ï?¼ EPQ Wires: Aesthetically superior wires are produced from 1.6 mm to 8.0 mm for electro-polishing & electro-plating processes for manufacturing White Goods and Consumer Durables.
Rian Globotech is a reputed company involved in the manufacture, domestic supply and export of Stainless Steel Wires. These wires are available in various finishes viz. soft, quarter (1/4) hard, half (1/2) hard or full hard in different surface finishes like bright, mat/dull respectively based on specific buyer requirements. These stainless steel wires are used to manufacture automotive products, balls & taper roller bearings, braiding hoses, chains, conveyor belts, filters, free cutting wires, fasteners and wire nails, flexible connectors, kitchenware and gadgets, trolleys, centrifugal baskets, MIG & TIG welding wires, needles, pins, sieves, spokes, springs, surgical equipments, scrubber / scouring pads, steel wool, utensils, woven & knitted wire cloth, wall ties & tying wire, wire ropes, welding electrodes and fillers etc. The regular grades offered are 201, 202, 204CU, 302, 304CU, 304HC, 303, 304, 304L, 310, 314, 316, 316L, 316Ti, 321, ER308L, ER309L, ER310, ER316L, 430L. Etc. Diameter Range : 0.040mm - 12mm (0.0016 - 0.4724) Supply Condition : Soft, ¼ Hard, ½ Hard, ¾ Hard &Full Hard Surface Finish : Bright, Matte Finish, Soap Coated or Electro Polish Quality
This division is engaged in stocking and supplying of stainless steel wires. This wires mainly used in industries like ship building, medical, agriculture, springs, vineyard, agriculture, chemical, petroleum, automobile, weaving braiding, fastener, food processing, paper mills, welding electrode, & house hold applications etc. Product Details Stock/Manufacturing Range: Size Range : 0.040mm to 16mm Hardness : Soft, ¼ Hard, ½ Hard, Hard & Full Hard (Spring Hard) Surface Finish : Bright, Matt Finish, Soap Coated Electro Polish Quality Special Requirement : With such a vast experience and expertise, we can cater to all your. Our Grades & Specifications: ASTM : 201, 201Pni3, 201CU, 202, 204CU, 302, 302CHQ, 304CU or 304HC, 303, 304, 304L, 310, 314, 316, 316L, 316Ti, 321ER, 308ER, 309LER, 310ER, 410, 420, 430.
30CrMnSiA is a medium carbon with high strength and poor welding performance. 30CrMnSiA has high strength and sufficient toughness after quenching and tempering, and hardenability is also good. After quenching and tempering, the material can be used as a grinding wheel shaft, gears and sprockets. 30CrMnSiA has good processability, small processing deformation and good fatigue resistance. For shaft and piston parts and so on. Used in automobiles, aircraft, various special wear-resistant parts, etc.
steel wire ropes,1x7,6x7,6x12,6x24, etc
Key advantages of coil winding nozzle/ wire guide nozzle. 1)High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing. 2)Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 3)Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm. 4) Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right. Specification of coil winding nozzle/ wire guide nozzle. Item Model Ã?D Ã?D1 Ã?d2 Ã?d2 L1 L 1 TC1003-3008-3006 3 0.8 0.3 1.0 6 30 2 TC1003-3010-3510 3 1.0 0.3 1.0 10 35 3 TC1005-3010-3008 3 1.0 0.5 1.0 8 30 4 TC1005-3014-3510 3 1.0 0.5 1.0 10 35 5 TC1207-3014-3008 3 1.4 0.7 1.2 8 30 6 TC1210-3020-3010 3 2.0 1.0 1.2 10 30 Advantage of our coil winding accessaries 1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles. 2. Competitive price 3. Excellent quality of tension device and accessaries 4. Fast response speed 5. Professional tensioner engineering team 6. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle. 1)High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing. 2)Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 3)Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm. 4) Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right. Specification of coil winding nozzle/ wire guide nozzle. Item Model Ã?D Ã?D1 Ã?d2 Ã?d2 L1 L 1 TC1003-3008-3006 3 0.8 0.3 1.0 6 30 2 TC1003-3010-3510 3 1.0 0.3 1.0 10 35 3 TC1005-3010-3008 3 1.0 0.5 1.0 8 30 4 TC1005-3014-3510 3 1.0 0.5 1.0 10 35 5 TC1207-3014-3008 3 1.4 0.7 1.2 8 30 6 TC1210-3020-3010 3 2.0 1.0 1.2 10 30 Advantage of our coil winding accessaries 1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles. 2. Competitive price 3. Excellent quality of tension device and accessaries 4. Fast response speed 5. Professional tensioner engineering team 6. Good after-sales service
We are a provide a best quality wire in discount rate
Stainless Steel Woven Wire Cloth Material: 201,202,302, 304, 304L, 316, 316L,321 and 430 etc Weave Type: Plain weave, Twilled weave, Plain dutch weave, Twilled dutch Weave, Reverse dutch weave. Performance : Corrosion-resisting, Wear-resisting, Tear-resisting. Uses: Mainly used for Separation and Flitration, extensively used in petroleum, chemical industry, enviroment protection, mine, airspace, paper-making, electronic, metallurgy etc. Special size and specification are available according to customers requirment. Normal mesh size: Plain weave: 0.5X0.5mesh to 635X635 mesh; Twill weave:20x20mesh to 400x400mesh; Plain dutch weave:10X64mesh to 80X700mesh; Twill dutch weave:20x250mesh to 400X2800mesh; Reversed dutch weave: 48x10mesh to 720x150mesh. Wire diameter:0.025mm-1.8mm. Roll width:1.0m,1.2m,1.5m,1.8m,2.0m etc. any width available at request. Roll length:30m or 50m,any length available at request. Sample:Free sample sent on request. Factory: Hebei Maishi Wire Mesh Manufacture Co.,Ltd ,connected with production of stainless steel woven wire mesh and netting, since 1992, in China. The machinery and apparatus used in production process fully based on the high computer technology, so it is accepted as the only company capable of having TSE ( Chinese Standard Institution ) certificate and ISO 9001:2008, all of our produce according ISO9044:1999, JIS G 3555:2004, and ISO3310/BS410 etc. We use imported precision slitting machine,can article points precision mesh, plain weave, twill weave. Our mainly market of stainless steel wire mesh/cloth in Germany, UK, Italy, Turkey, Korea, Thailand, Brazil, Mexico, Argentina, Egypt, Ghana and other parts in the world. We have good reputation in the world with the quality and price. You are welcome to send by email or fax your inquiry for trial orders. Maishi supply high quality which has smooth and bright surface,high hardness,high temperature resistance,non-deformation features.. Payment: 100%T/T in advance if order amount less thanUSD10000.00, 30%paid in advance and 70%paid before shipment if order amount more than USD10000.00. L/C payment is workable. Any other payment term can be negotiatory Our tenet:top credit,quality goods,favourable price,excellent service Guarantee:Goods can be compensated and returned if you are not satisfied with the quality. We welcome the need to communicate with our sales staff specifications and meshes, we will be happy to cooperate with you.
01 Name Stainless Steel Wire Rope 02 Construction 6*19,7*19,1*7,1*19,6*7,7*7,6*37,7*37... 03 Meaning 7 strands each consisting of 7 or 19 single wires.All wires in all strands have the same or similar dia.IWRC is independend wire rope core.FC is fiber core. 04 Diameter Range From 1.0mm to 40mm 05 Material Stainless Steel 06 Grade AISI 200 series: 201,202 AISI 300 series: 301,302,304,304L,304H,310S,316,316L,321,347 AISI 400series: 410,420,430,,434 07 Surface treatment Dry,Annealed,Electro polished 08 Standard ASTM, DIN, GB, EN12385-4, BS,JIS etc. 09 Tensile Strength 1570N/mm2, 1670N/mm2, 1770N/mm2 10 Lay direction R. H. O. L or L. H. O. L 11 Packing detail Plywood reels, plastic spools or according to requirements. 12 Characteristics felixable,mostly used 13 Application rigging,construction,industry,aircraft,hardware,machinery,etc. 14 HS Code 7312100000
01 Name Stainless Steel Wire Rope 02 Construction 6*19,7*19,1*7,1*19,6*7,7*7,6*37,7*37... 03 Meaning 7 strands each consisting of 7 or 19 single wires.All wires in all strands have the same or similar dia.IWRC is independend wire rope core.FC is fiber core. 04 Diameter Range From 1.0mm to 40mm 05 Material Stainless Steel 06 Grade AISI 200 series: 201,202 AISI 300 series: 301,302,304,304L,304H,310S,316,316L,321,347 AISI 400series: 410,420,430,,434 07 Surface treatment Dry,Annealed,Electro polished 08 Standard ASTM, DIN, GB, EN12385-4, BS,JIS etc. 09 Tensile Strength 1570N/mm2, 1670N/mm2, 1770N/mm2 10 Lay direction R. H. O. L or L. H. O. L 11 Packing detail Plywood reels, plastic spools or according to requirements. 12 Characteristics felixable,mostly used 13 Application rigging,construction,industry,aircraft,hardware,machinery,etc. 14 HS Code 7312100000
CELMETAL Gabion box is a kind of hexagonal wire mesh that is made of steel wires. The size of wire is according to the different sizes of hexagonal net. For steel wire, The sizes from 2.0mm To 4.0mm can be adopted, and for PVC coated wire, The size from 3.0 To 4.5mm, will be used as a mesh wire, and the lacing wire is generally heavier than the mesh wire. Sizes: 1) 2m*1m*1m 2) 3m*1m*1m 3) 4m*1m*1m 4) 5m*1m*1m 5) 5*1.5m*1m 6) 2m*1m*0.5m Materials: 1) Galvanized steel wire 2) Zinc-5% aluminum-mixed mischmetal alloy steel wire 3) with PVC or PE coating Features: 1) Economic. Just fill the stone into the gabions and seal it. 2) Simple installation. No special technology needed. 3) Weather proof under natural destroy, corrosion resistant. 4) No collapse even under big scope of deforming. 5) Sludge in the stones is good for plant growing. Mixed to form a integrity with the natural environment. Applications: 1) Gabion box is used for slope and foundation pit support. 2) Prevention or rock breaking ,slope planting . 3) Water and soil protection.
It is mainly used in wire mesh or wire cloth. Stainless steel wire size can range from 0.07mm diameter to 0.025mm diameter. Materials: AISI 202/304/316/304L/316L, etc. Sizes: Wire diameter range from 5mm to 0.05mm. Features: Our range of Wire made of Stainless Steel are not only known for their variety but are also known for their good quality, long life and very reasonable prices. Quality and service is our first priority, we effectively use technically advanced machinery equipment and the expertise of our work to deliver our stainless steel wired products. Applications: With bright surface, slight magnetism and no cracks on forming, CELMETAL stainless steel wire is widely used in bicycle fittings, kitchen and sanitation tools, goods shelf, pet cages, gill racks, decorative handles and baskets, food and medical machinery accesses, etc.
