Pressure vessel plate also named as boiler steel plate.These steel plates mainly used for building boilers and pressure vessels such as petroleum, chemical industry, power plant, boiler, uses in manufacturing the reactor, the heat interchanger, the separator, the spherical tank, the oil gas storage holder.
Rolling specifications range:thickness within 6-300mm, width within 1500-4000mm, length within 4500-14000mm.
Contact us freely if you need the following steel items:
Standard
Steel grade
Kilo steel provide the high-performance steel plate and good services around the world. Our products are widly used in many variety of boiler or pressure vessel steel equipments, including oil tank, hydranlic fluid stream, water, petrochemcia and nuclear fields, reactor, heat exchange, amine absorbers. According to the different pressure requirement, we supply the different standard and corresponding materials which could satisfy the special reqirement from the client's project, such as astm, asme, en and ped standard.With the rising performance levels of power stations, boiler and pressure vessel equipment require more larger size and capable of satisfying with the increasing demands in terms of operating conditions and reliability.Our company has established oursealves as a leader in the high-tech steel industy through our purpose: to reply on our big purchasing team and technical team to satisfy with superior project.
Advantages:
1. Most of en and asme standard can be satisfied .
2. For the indicated project, our technical department can design your required materials with different dimension , mechanical properity or high-tech requirement for one character.
3. The fundamental property of steels for pressure vessels is their ability to withstand high pressure at different temperatures. They have good weldability, as well as excellent toughness, and are suitable for normalisation annealing and stress-relief annealing (both treatments neutralise local hardening caused by welding).
Delivery conditdions:
1. Heat treatment: annealing, normalizing, quenching, tempering
2. Detection: ultrasonic inspection under gb/t 2970 and astm a435/a435m-70, astm a579/a579m-72 (i degree, ii degree, iii degree ).
3. Z direction properity : z15, z25, z35 under the thickness 300mm
We are very experienced in manufacturing every kind of high pressure vessles including reactors, towers, heat exchangers, boilers and so on. Please don't hesitate to contact us once you have any query. MRY is looking forward to hearing from you.
We Bharattanks dot com, gas tank installation dot com are an ISO-9001 company and largest exporter of gas equipments . We manufacture equipments for storage and distribution of LPG , Chlorine, propane , ammonia, ethylene oxide, Carbon dioxide, Nitrogen, Oxygen, Hydrogen, Propylene , Ethanol, CNG , Biofuel , Surge vessels , argon, sulphurdi oxide, Pressure Vessels & Pressure Equipments, lpg semitrailer transport tank ,LIN, LOX, Lar, LNG cryogenic transport tanks, and other gas tanks. We also manufacturer of lpg mounded vessels , LPG terminal , Lpg sphere, GLP , Auto gas components, Auto gas station, Ambient air vaporizer, Fuel tank, anhydrous ammonia storage & transport tank, Lpg Bulk Installation and ammonia cylinder filling plants on turnkey basis.
Dependable, stable and highly precise precision regulation
This is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The type-100 is ideal for applications that call for the utmost of control and maximum stability under variable operating conditions. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
Flow capacity 14 scfm (25m3/hr.) at 100 psig (700 kpa) supply
Exhaust capacity 5 psig (35kpa) above 20 psig (140 kpa) setpoint
Type 100 - 2 scfm (3.4 m3/hr.)
Type 100hr - 10 scfm (17.0 m3/hr.) (high relief)
Sensitivity 1/8" (3.2mm) water
Pilot pressure chamber bleed rate less than 0.08 scfm (0.15m3/hr.)
Effect of supply pressure variation of 25 psig (170kpa) on outlet less than .005 psig (.03 kpa)
Supply pressure, maximum 150 psig (1050 kpa)
Weight 1.4 lb. (635g)
Port sizes 1/8", 1/4", 3/8"
Gage ports (2) 1/4"
Output pressure ranges 14~420kpa, 14~700kpa
Mounting options pipe or panel
Pressure Vessels and Tanks
We manufacture pressure vessels, storage tank, reaction tower, heat exchanger, Jacketed Vessel and Clean Tank with Jacket, nonstandard equipments and Agitator equipments. These equipments can be made according to all kinds of standard such as Chinese GB150-98,AMSE, BS5500,PED requirement and CE mark, and the same all kinds of material used for it such as CS,SS( 304,304L,316,316L,321,347),Ti,AI,Cu etc.
Pressure vessel
All kinds of pressure vessel
High, medium and low pressure vessel
ASME standard pressure vessel
CE marked pressure vessel
Pressure vessel may of carbon steel, stainless Steel and other material
Tonson agitated pressure tanks are designed to uphold standards of reliability, durability and safely engineered which for more than 30 years have made it like no other. Portable tanks of steel or stainless construction for use in pressure applications: Paints, adhesives, porcelains, enamel, ink Ketc.
Available pot volume: 10L,30L,40L,60L,80L,120L,200L
HP: 1/6HP
Max . pressure: standard 3kgf/cm3 Thicken pot 7 kgf/cm3
Optional: stainless steel pot.
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, and machine manufacturing.
Tm-8812, tm-8811, can measure any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene pvc, gary cast iron, nodular cast iron and other materials.
Tm-8810, can measure only 11 types of materials, including steel, cast-iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, pvc, gray cast iron, nodular cast iron.
Case sizes:
1.5", 2", 2.5", 3.5", 4", 4.5", and 6", 8", 10",
Case material:
Steel case, steel black case, steel chrome plated case, steel gold
Plated case, brass polished case, stainless steel case, all this can
Take with front flange, back flange and u-clamp.
Bezel material:
Steel black bezel, steel bezel, chrome plated bezel, brass bezel,
Stainless, steel roll ring (or bayonet threaded ring), type: snap on, roll
Ring
Tube&socket:
Brass, stainless steel, steel with nickel plated, 316 stainless steel,
Phosphor bronze and so on.
Movement:
Brass, stainless steel
Connection:
1/8", 1/4", 1/2", 3/8", npt, bsp or bspt dependent on model&size.
Bottom, back left&right side connection
Available ranges:
30hg "- 0-15-10000psi
Windows:
Acrylic, glass&polycarbonate lens are available
Accuracy:
Asme b40.1 grade b(+3-2-3%)
Options&accessories:
Custom dial, metric scale, din 2.5% accuracy, recalibrators,
Restrictors, special connections and more.
The multifunctional decentralized reactor has the functions of low speed, strong stirring and high speed dispersion, and has good adaptability to medium high viscosity and thixotropic materials. Because of mixing, dispersing can be carried out at the same time and ideal results can be obtained. The machine is suitable for mixing all kinds of materials, dissolving and dispersing and painting, with simple operation and strong adaptability. It is an ideal multi-functional equipment such as mixing, dispersing and so on.
Pressure Vessels for Vaccuum Chambers, Autoclaves, Air Receivers, Steam Boxes Are Fabricated in Our Organisation as Per Various International Codes, Asme Sev Viii, Div 2 and Is 2825 Etc Using Boiler Quality Steel Plates and Ss Plates Under Third Party Inspection Like Lloyds, Bvqa Etc.
609 Pressure Vessels Suppliers
Short on time? Let Pressure Vessels sellers contact you.
