Garnet Sand , derived from mined Almandite and Andradite mineral deposits, is a semi-precious stone.Once extracted, it is processed and then screened to the desired grade. The combination of the high density and physical properties make Garnet nature's most highly efficient, effective and safe abrasive for both wet and dry blasting applications Pink Color 30-60 Mesh Alluvial Garnet Sand for Sandblasting Main Applications 1 Water filtration media 2 Sand blasting media 3 Water jet-cutting abrasive suggested materials: tile, Marble, granite, stone, stainless steel, steel plate. 4 Precise water jet-cutting, hole drilling, lapping 5 making coated or bonded abrasive tools
Garnet Sand , derived from mined Almandite and Andradite mineral deposits, is a semi-precious stone.Once extracted, it is processed and then screened to the desired grade. The combination of the high density and physical properties make Garnet nature's most highly efficient, effective and safe abrasive for both wet and dry blasting applications Pink Color 30-60 Mesh Alluvial Garnet Sand for Sandblasting Main Applications 1 Water filtration media 2 Sand blasting media 3 Water jet-cutting abrasive suggested materials: tile, Marble, granite, stone, stainless steel, steel plate. 4 Precise water jet-cutting, hole drilling, lapping 5 making coated or bonded abrasive tools
Brown Fused Alumina is also called Brown Corundum, it is fused and crystallized under high temperature from a mixture of bauxite and other and other raw materials. It is characterized by its high hardness,good toughness and shape in size. Abrasives tools made of it are suitable for grinding metals of high-tensile strength such as: carbon steel,general-purpose alloy steel,annealed malleable iron and hard broze,etc.It also can be used as refractory materials. F36 Sand Blasting Aluminium Oxide/Brown Fused Alumina Abrasives grade Grit size: 16#, 20#, 24#, 30#, 36#, 46#, 54#, 60#, 80#, 100#, 120#, 150#, 180#, 220# Micropowder: 240#, 280#, 320#, 360#, 400#, 500#, 600#, 800#, 1000#, 1200#, 1500#, 2000# Refractory Grit size:1-0mm, 3-1mm, 5-3mm, 5-8mm, -200mesh, -240mesh, -320mesh. Physical and chemical analysis for brown fused alumina: Purpose Specification Chemical composition(%) Al2O3 Fe2O3 SiO2 TiO2 Abrasive Grade F 4#-80# 95.0 Min 0.3 Max 1.5 Max 3.0 Max 0.05 Max 90#-150# 94.0 Min 0.03 Max 180#-240# 93.0 Min 0.3 Max 1.5 Max 3.5 Max 0.02 Max P 8#-80# 95.0 Min 0.2 Max 1.2 Max 3.0 Max 0.05 Max 100#-150# 94.0 Min 0.03 Max 180#-220# 93.0 Min 0.3 Max 1.5 Max 3.5 Max 0.02 Max F230-F1200 92.5 Min 0.5 Max 1.8 Max 4.0 Max - F36 Sand Blasting Aluminium Oxide/Brown Fused Alumina Application * For Free grinding, such as glass industry. * For Friction products and abrasion resistance ground. * For Resin bonded abrasive and coated abrasive products. * For Refractory material, Wear-resistant and fire-proof products. * For Grinding stone, sand paper, sand cloth, sand belt. * For Coated abrasives sand paper and Sandblasting/ Wet and dry blasting. * For Producing mold of precision casting and Grinding, lapping and polishing media. Packaging & Shipping 1. 1 ton bags in container, 20 MT/20'FCL. 2. 25kg bags in container, 20 MT/20'FCL 3. 25kg bags in ton bags, then in container, 20 MT/20'FCL 4. as the customer' request.
Black Fused corundum/black corundum/black fused alumina abrasive is also known as low aluminum corundum abrasive. It is also a new type product of polishing material, and it is a dark gray crystal body made α -Al2O3 and ferropicotite as main ore in the electric arc furnace by smelting the bauxite. It has characteristics of moderate hardness, high toughness, high temperature resistance, and stable thermal stability. It is mainly suitable for free grinding, such as coarse grinding before electroplating products, mainly for polishing and sandblasting of stainless steel, fabricated metal products.Our Top grade glass polishing black fused alumina price is reasonable.
Brown Fused Alumina: The brown aluminum oxide is made from bauxite, carbon materials, iron filings as raw material through melting in the electric furnace. It suitable for grinding high tensile metal, such as: a variety of common steel, malleable iron and hard bronze, etc., can also create advanced refractory. Application of brown fused alumina: grinding media, sandblasting media; surface cleaning, grit blasting, lapping, polishing, grinding, sandblasting, etching : wet and dry blasting : mineral skin abrasion materials metal finishing & surface preparation : refractors, ceramics, coatings " bonded & coated abrasives.
Black fused alumina, also known as low-aluminum corundum, is a gray-black crystal with α-Al2O3 and iron spinel as the main ore phase, which is obtained by melting aluminum bauxite in an electric arc furnace. It is characterized by low Al2O3 content. There is a certain amount of Fe2O3 (about 10%), so it has the characteristics of moderate hardness, high toughness, high temperature resistance and stable thermal performance. It is mostly used for free grinding, such as grinding and rough grinding before electroplating of products. It is mainly used for polishing and sand blasting of stainless steel, metal products, optical glass, bamboo and wood products, and is also a novel abrasive for manufacturing resin grinding wheels, cutting sheets and abrasive cloths.
White fused alumina oxide is manufactured by the fusion of controlled quality pure grade Alumina in an electric arc furnace at temperatures greater than 2000C followed by a slow solidification process. Strict control over quality of raw materials and fusion parameters ensure products of high purity and high whiteness. The cooled crude is further crushed, cleaned of magnetic impurities in high intensity magnetic separators and classified into narrow size fractions to suit the end use.
Corn cob powder is made from corn core,it has the advantages of uniform structure, good hardness, good toughness, good water absorption and good abrasion resistance. It can be applicated cfeed premix, a variety of mold agents, antifungal agents, vitamins.it is also a production of veterinary drugs carrier, carrier is bean cake powder and other alternatives.
YCang flap disc are widely used for surface grinding and edge of oblique angle cleaning. YCang shall provide you with technical guide whenever you want to select grinding wheels.From ordinary manufacture to metal related industry,such as steel,stainless steel,collarde metal and nuclear industry,YCang can always meet your demands.The serial products also include stone material flap disc and cupshaped wheels.
The outer diameter of this product is 180mm, with a thickness of 1.6mm and an inner diameter of 22mm. This product has the sharp, the cutting speed is quick and so on the characteristic
The outer diameter of this product is 180mm, with a thickness of 1.6mm and an inner diameter of 22mm. This product has the sharp, the cutting speed is quick and so on the characteristic
Garnet Abrasive Description: Garnet abrasives use the high quality almandine as raw material,Website:http://www.abrasivesupplier.com, produced after machining and water, magnetic, and screened. With excellent performances such as self-sharpening, proper hardness, good toughness, sharp edges, low loss and longer life etc, garnet is widely used in chemical plants, oil & petrochemical industries, for blasting and water jet cutting in the field of construction & maintenance of ship and containers, and building industries etc. Physical characteristics:Physical ItemsGrainsColorRed BrownToxicityNoneMelting Point1300â??Solubility in WaterNot Soluble in WaterSpecific Gravity3.90-4.10 g/cm3ConductivityLess Than 125us/cmMohs Hardness7.5-8.0Pathological EffectsNoneReactivityNone Average Chemical composition:SiO237.09%Al2O320.11%FeO29.73%Fe2O31.83%TiO20.46%MgO5.26%CaO2.09%MnO1.19% Mineral CompositionAlmandite Garnet>98.0%Ilmenite
Shandong kaitai group co., ltd. Is the largest manufacturer of metal abrasive in asia which integrates with technical research, development and production. Cooperating with material science & engineering college of shandong university and guided by experts and professors of metal abrasive field. The company has developed 8 series including cast steel shot, cast steel grit, steel cut wire shot, stainless steel shot, stainless steel cut wire shot, aluminium shot, zinc shot, copper shot, 80 kinds of abrasive products. The company could produces 250, 000 tons metal abrasive. Based on 300 million yuan (rmb) of fixed assets, with a yearly turnover of 500 million yuan (rmb). Kaitai steel shot abrasive (hongkong) co., ltd. Is in charge of overseas sales of steel shot, steel grit. The company is advanced & new technology enterprise of shandong province and national blasting & peening standardization technology committee unit. With strong technical force, advanced equipments like intermediate frequency induction furnace, centrifugal blasting machine and so on. The company could produces high strength, strong durability cast steel shot, cast steel grit through double quenching, tempering, screening and so on. The company has perfect quality control system. The company has introduced two ervin test machine from usa. Ervin test machine is mainly used for testing fatigue life of metal abrasive.
Ball mill liner Three characteristics: 1.High wear and impact resistance With scientific and reasonable formulation of alloy elements, the high manganese steel liner is multivariate micro-alloying on the basis of the original high-manganese steel, then it has good physical and chemical properties, such as the hardness hrc52-56, the impact toughness value larger than 150j, using life is more than twice as high manganese steel. So it can tolerate a huge impact strength. In a long-term work it can keep lining surface state so ensure a stable increase of more than 5% of production. 2. High strength, high toughness By using the special quenching medium agent with thermal stability in the quenching process, high manganese steel liners combine high strength, high hardness and high toughness perfectly, which can satisfy high wear resistance and high impact loads process requirements. 3.High cost-effective, strong adaptability Through the reasonable alloying elements and advanced process of our company, high manganese steel liner has a high quenching hardness, high toughness characteristics. So that it not only has good wear resistance, but also shows excellent price compared with the ordinary liner. It can adapt to mine wet grinding, dry grinding, mixing mill and etc. High manganese steel liners use advanced heat treatment process and change the height of ball mills peak, trough. These all help improve grinding rate of ball mill and increase the 20% of machine-hour capacity. Rong mao is ball mill liner, high manganese steel ball mill liner, magnetic liner, mill lining manufacturer in china -
This band saw blade is suitable for beef, mutton and all kinds of bone. Universal Type: 1.sepcial harding and precision grinding of the tooth tip, so that more rapid sawing; 2.universal design can be easily cut straight line cut all kinds of frozen or fresh meatbone food; 3.the use of a unique of design of the variable tooth, so that cutting noise down to the minimum, saw the plane more flat, less loss; 4.the federal food grade stainless steel products, there is no need to worry about blade corrosion and rust, and the cutting surface is smooth, longer service life. The sizes of product: Thickness:055mm Wide:16-19mm Ps: Customized for demand.
Kanzo- the cutting experts - industrial hss & tct circular saw blades Saw blades for the metal working industry 1.Hss saw blades from 40 mm up to 600 mm 2.Solid carbide saw blades from 15 mm up to 315 mm 3.Carbide tipped, tct circular saw blades for the steel cutting 4.Special sizes on demand Cutting material: Metals Ferrous materials (st-37, st-44, st-52.) Stainless steel (aisi 306, aisi 304 316...). Non-ferrous materials (aluminiums, coppers brasses.. Wood
Kanzo- the cutting experts - industrial hss & tct circular saw blades Saw blades for the metal working industry 1.Hss saw blades from 40 mm up to 600 mm 2.Solid carbide saw blades from 15 mm up to 315 mm 3.Carbide tipped circular saw blades for the steel cutting 4.Special sizes on demand Cutting material: Metals Ferrous materials (st-37, st-44, st-52.) Stainless steel (aisi 306, aisi 304 316.) Non-ferrous materials (aluminiums, coppers brass.) Wood
Product name : , bimetal band saw blade and tct band saw blade, Material : , m42, m51 alloy steel, tct etc., Width*thickness : 13mm*0.6mm, 13*0.9mm, 20mm*0.9mm, 27mm*0.9mm, 34mm*1.1mm, 41*1.1mm, 41mm*1.3mm, 54mm*1.6mm, 67mm*1.6mm 80mm, Width for tct, 20 27 30 35 40 50 60 55 75 80 100 125mm, Length customized as your request, Max length: , 500 thousand meters, Usage: , metal cutting, wood cutting
Product, name, bimetal, band, saw, blade and tct band saw blade Material, , m42, m51, alloy, steel, tct etc. Width*thickness, , 13mm*0.6mm 13*0.9mm, 20mm*0.9mm 27mm*0.9mm 34mm*1.1mm 41*1.1mm 41mm*1.3mm 54mm*1.6mm 67mm*1.6mm, 80mm Width for tct20 27 30 35 40 50 60 55 75 80 100 125mm Length, customized, as, your, request Max, length, 500, thousand, meters Usage, metal, cutting, wood cutting
Kanzo- the cutting experts - industrial hss & tct circular saw blades Saw blades for the metal working industry 1.Hss saw blades from 40 mm up to 600 mm 2.Solid carbide saw blades from 15 mm up to 315 mm 3.Carbide tipped, tct circular saw blades for the steel cutting 4.Special sizes on demand Cutting material: Metals Ferrous materials (st-37, st-44, st-52.) Stainless steel (aisi 306, aisi 304 316...). Non-ferrous materials (aluminiums, coppers brasses.) Wood
