Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyera s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

C: 0.54-0.8% Si: 0.18-0.40% Mn: 0.60-1.05% S: 0.04% Max P: 0.035% Max Used rails R50-R65 Under 200-202 International Standard ISRI Code 27-29 R50 R65 Harmonization System (HS) Code : 730210

Application : Industrial Type : With Ballast, Continuous Longitudinally Supported Track, Ballastless Gauge Length : Broad, Meter, Narrow Usage : Crane, Railway Recyclable : Yes Color : Rust Color Material : Heavy Melting Scraps

C: 0.54-0.8% Si: 0.18-0.40% Mn: 0.60-1.05% S: 0.04% Max P: 0.035% Max Used rails R50-R65 Under 200-202 International Standard ISRI Code 27-29 R50 R65 Harmonization System (HS) Code : 730210

We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%

Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.

Product quality Tin is a silvery white and soft metal. It is soft and has good ductility. Its hardness is relatively low. You can cut it with a knife. At the temperature of 100 â??, it can develop into very thin tin foil, and the thickness can be less than 0.04 mm. Pure tin can be used as coating materials, and has a very wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors. Each ingot weighs 25kg+ 1kg; Bundled, each bundle weighs about 1050 kg The impurity composition of our tin ingots:

We are your reliable source for high-quality welding electrodes that deliver exceptional performance in diverse welding applications. We recognise that the welding industry demands products that are durable, efficient, and capable of producing superior welds. Our unique challenge lies in ensuring that the welding electrodes we import adhere to stringent quality standards. To address this, we partner with established manufacturers who have a proven track record of delivering reliable welding products. We conduct comprehensive quality control checks on each batch of welding electrodes, verifying their chemical composition, tensile strength, and welding performance. By doing so, we guarantee that the welding electrodes we supply consistently meet or exceed industry standards, enabling our customers to achieve impeccable welding results.

Cobalt metal sheet scrap with SGS factory delivery Cobalt metal powder Cobalt Powder pure 99.99% 1.35um With particle size of 0.8-1.5m, and loose packing Product name: cobalt plate, cobalt sheet Material: 99.9% min cobalt Size: thickness: 0.025mm min Width: 600mm max According to your request Technique: cold-rolled, hot-rolled Condition: annealed Applications: chemical industry, mechanical equipment, chemical engineering

Electrolytic Cobalt , Cobalt Cathode Cobalt metal sheet scrap with SGS factory delivery Cobalt metal powder Cobalt Powder pure 99.99% 1.35um With particle size of 0.8-1.5m, and loose packi Purity: 99.95% min. Size as follows: full plate: 950~970-800~830mm cathode (cut): around 50*50*7 mm Noted: other purities and size available upon request

Factory direct sales Tin Ingot SN 99.99% tin ingot for purity/High Quality TIN INGOTS from East Africa TIN INGOTS /Tin Ingot SN 99.99% Key Specifications/ Special Features: Factory price Tin ingots pure 99.9%-99.99% tin ingot for sale 1. Grade: 99.99% pure tin ingots 25kg per pcs with best price 2. Size: customer requirements 3. Standard: ASTM 4. Certification: ISO9001, SGS, ROHS