Typical application: Without primer: tiles,glass, stainless steel, enamel. With primer: clinker, brick, hard PVC, wood.
Tile Adhesive C1 T100 is a tile adhesive with cement base.It is ideal for the adhesion of ceramic wall or floor tiles to surfaces made of concrete and plaster.It is used for both indoors and outdoors.It is classified as glue type C1 at EN 12004 Shades : White
Tile Adhesive C2T T280 is a tile adhesive of cement base enhanced with acrylic rytines of high quality.It is suitable for the tile pasting of low to zero absorbance such as klinker, cotto , granite,glass -inlay, porcelain tiles.It does not slides in the vertical surfaces.For both indoors and outdoors. It is classified as glue type C2T at EN 12004. Shades : White Consumption : 2-5 kg/m2
Sealant The Sealant technical data should meet the following requirements, and please provide the mastic data sheet and quality certificate documents. We are manufacturer of sealant, foam glass, polyurethane foam, thermal insulation material, pumice stone, grill stone with high quality and best service.
USE : Electronic. Handcraft , Toy, Carton packing, Metal, Plastic, Box, ect. Character:high viscosity, Non wire drawing, Cold-resistance, No loss of viscosity, etc. Certification:SGS Environmental Protection Report, ROHS Authentication, MSDS Safety Report
USE: Electronic, Handcraft , Toy, Carton packing, Metal, Plastic, Box Character: high viscosity,not-drawing,cold-resistant,ect. Certification:SGS Environmental Protection Report, ROHS Authentication, MSDS Safety Report
This series product viscosity is extremely strong, white stick or granular, also has the yellow granular and stick, softening point of 80 degrees or so, short curing time, widely used for automatic packaging, carton packaging and color box packaging and other kinds of packaging requirements, guarantee the stability of adhesive products to the greatest extent, no deformation, ensure the quality of the goods packaging, do not package materil. The product is based on a number of similar products in china, and a new kind of single-group strong adhesive is introduced according to the user's requirements. It is suitable for the bonding of carton, paper box, automation, color box and other products. Products which use it are firm and smooth without extra adhesive. The product has wide applicability, stable quality and has been well received by users since it was launched. First, the film products need to be treated with adhesive and then apply the adhesive evenly to the surface with a brush or scraper. The coating thickness is between 0.1 and 0.5mm, according to the paper degree. Hold it at a stop, then add pressure, and after 24 hours, it will be bonding.
This series of products are suitable for all kinds of sealing mouth glue, softening point of 80 degrees or so, mainly for the bottom of the bag, carpet glue, carpet ruffled, express single seal, wood sealing side, automotive interior bonding, arm in arm bag on the ground, dialysis paper, paper bag sealing glue sealing purpose, guarantee the bonding material without extra adhesive, stability, safety and health, no harm to human body, no taste, using at ease. Suitable for carton sealing, milk powder box, other color box and other sealing or bottom, side bonding with hot melt adhesive. Open time moderate, very excellent low - temperature resistance. - 20 below zero remains very strong cohesive force. It has very good temperature resistance. The product has good weather resistance and strong adhesion.
Tiandiao hot melt adhesive, softening point of 80 degrees or so, the series of products for a variety of clothing accessories, advanced material glue, shoe glue, wide range of uses, tasteless colorless, non-toxic, belong to the environmental protection hot melt adhesive, guarantee the stability of the clothes and shoes to prevent the degumming, no effect to human body health. Material rubber features are melting point of 80 degrees or so sticky: 3000 mpa. S / 150 shear strength: 210 n/min, transparent yellow granular, without impurities, no bubble. This product has strong adhesiveness, good thermal stability, the advantages of high hardness, no wiredrawing, suitable for high-end shoe adhesive and various kinds of clothing accessories, leather folding with hot melt adhesive, leather case is mainly used for albums, hardcover notebook cover, bags and other leather materials and use. The product is through sgs environmental detection, cheap and fine.
This product is used for bookbinding, cartons, bags and other light adhesive non-woven fabric, the td-1018 strongest viscosity, as the rubber type hot melt adhesive, softening point of 80 degrees or so, for granular or massive viscosity is extremely strong, the maximum extent to ensure adhesive of robustness, do not come loose page, page not to drop, does not glue, to ensure the stability of the adhesive. Professional for all kinds of binding books, such as textbooks, specifications, periodicals, etc. Appearance: milky colloidal particles (gum) transparent white colloidal particles (edge glue) ingredient: eva specification: 25 kg/bag storage: as for a cool and dry place instructions: 1) open and curing time will as the working environment temperature, the temperature of the glue, pressing time and pressure maintaining power and change. 2) different hot melt adhesive should be selected according to different paper. Using temperature shall not exceed 200 â??, lest cause coking decomposition, also cannot use temperature below, otherwise the lower bonding strength; suggest that the temperature 150-180
Resin hot melt adhesive, softening point of 80 degrees or so, this series of product is suitable for display rack of goods. They have several models, such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, without extra adhesive, suitable for all kinds of working environment. Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with glue. The products have been certified by sgs, which is non - toxic.
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue. 1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
The product is called pp, epe hot melt adhesive, suitable for the adhesion of hard sticky materials such as pp and epe. Softening point at about 80anti-temperature about 70 the opening time in 15-20 s.Our products are non-toxic and insipid. High viscosity, fast curing, easy operation, continuous use without carbonization and yellowing resistance, comply with rosh instructions. Instructions: 1.Recommended gluing method: dispensing 2.Recommended temperature: 130 to 150 3.If there is carbon deposition in a rubber case or hose, may consult equipment manufacturer, or clean with clean mineral oil under 120. 4.The stickiness of the adhesive can be adjusted by temperature. 5.It is prohibited to mix with other brand hot melt adhesive. 6.After adding material to the hot melt tank, the glue tank cover should be closed immediately to prevent foreign contamination.Td-
This series of products can achieve good adhesion effect, environmental tasteless, high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special glue. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a filter degumming problem such as rubber, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation.
The company supplies the high temperature heat-resistant hot melt glue, the softening point is about 100 degrees, the quality assurance, welcome the consultation to negotiate. This series is very high temperature resistant . The products are blocky, lolliform, granular, white and yellow products, welcome to inquire Fast curing speed and near maximum bonding strength. High adhesion strength, durable and excellent uv light. Good temperature resistance, wide temperature range, and good adhesion effect at high temperature. Adhesion surface does not require strict treatment, easy to use. Excellent resistance to oil, water, acid, kerosene, ethanol, alkali, heterocyclic hydrocarbon, nuclear radiation, etc. Safety and toxicity characteristics: it has a very slight odor, no inhalation danger, and no toxicity after curing. Storage stability is good, the storage period is one year.
The company supplies thelow - temperature hot melt adhesive, and the low temperature not brittle glue, the quality assurance, welcome the consultation to negotiate. The series is not easy to break at low temperature, and it can guarantee the fastness and reliability of adhesion products. The products are blocky, lolliform, granular, white and yellow products, welcome to inquire. Fast curing speed and near maximum bonding strength. High adhesion strength, durable and excellent uv light. Good temperature resistance, wide temperature range. Adhesion surface does not require strict treatment, easy to use. Excellent resistance to oil, water, acid, kerosene, ethanol, alkali, heterocyclic hydrocarbon, nuclear radiation, etc. Safety and toxicity characteristics: it has a very slight odor, no inhalation danger, and no toxicity after curing. Storage stability is good, the storage period is one year.
This series product is suitable for use in medical industry, the softening point of 80 degrees or so, wide range of uses, specific have infusion stick gum, gum base cloth, pressure sensitive adhesive products, such as white, yellow and black lump hot melt glue, to ensure product safety and health, no harm to human body health, to ensure that the use of rest assured with enjoyable. Hot melt adhesive is an environmental hot melt adhesive which meets the international fda standard and is not allergic to the skin. With the constant innovation of medical supplies, hot melt adhesive is more and more play its unique role, it has long been used in medical supplies material bonding, now it is a bigger role as the carrier of drug and skin nicely.
Wood putty, wood filler, industrial filler, industrial flour, palm kernel shell powder, formaldehyde remover, catcher, scavenger, wood ash, log sealant.
BIBHAS Industries Anti-Puncture Gel & TYRE COOLANT with Additional Fibre Pack of 1 Litre Anti-Puncture Gel and Tire Coolant is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BIBHAS Industries PUNCTUREWALA TYRE SEALANT & COOLANT 1 Litre PUNCTUREWALA TYRE SEALANT & COOLANT is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
