Blasting grades Blasting grade garnet can be used for blast cleaning of ships, oil rigs, oil pipes, oil storage vessels, water tanks, boilers, railcars & wagons, pipes etc. With highest efficiency and low dust levels. Iogs garnet is extremely hard and can be reused up to 5 times or more. Garnet sand water jet cutting grades Our garnet with precise size and low dust is found to be effective in cutting stainless steel, titanium, alloys, granites glasses etc. With high accuracy to any geometrical shape. Our garnet is of indian origin, which is harder and heavier, hence it cuts faster. We are specialized in this grade. 25 or 50 kg polypropylene bags with inner liner. 25 or 50 kg multi-ply paper bags with inner liner. 1 ton or 2 ton jumbo bags with inner liner. 1 ton or 2 ton wooden pallets with plastic shrink-wrap or stretch wrap. 1ton or 2 ton high sided wooden pallets
RP-19 inert ceramic balls are the most widely used in refining, petrochemical, and gas processing applications with unmatched impact resistence, thermal shock and crush strength and survivalbility. Our balls is your smart choice in catalyst and adsorbent bed support media because of the high quality raw materials, controlled processing and the most consistent properties. Available sizes: 3mm, 6mm, 10mm, 13mm, 19mm, 25mm, 30mm, 38mm, 50mm, 75mm Chemical composition: SiO2 69%-74% Al2O3 19%-23% SiO2+Al2O3 ú+92% CaO 0.39% TiO2 1.18% MgO 0.51% K2O 3.06% Na2O 0.53% leachable Iron less than 0.1% Physical properties: Free volume (%) 40 Water absorption (wt. %) ú+0.5 Hardness, Mohsí» ú+7 Particle density (gm/cc) 2.3 Bulk density (kg/m3) 1370-1400 Maximum operating temperture, (íµ) 1350 Acid resistance(%) 99.6% Alkali resistance(%) 85% Thermal shock resistance(íµ-íµ) 427-20 Crush Strength size Crush strength, lbs(kg) 3mm (1/8í¦) 80 (36) 6mm (1/4í¦) 180 (82) 10mm (3/8í¦) 330 (150) 13mm(1/2í¦) 600 (273) 19mm(3/4í¦) 1300(590) 25mm(1í¦) 2200 (1000) 30mm(1-1/4í¦) 2200 (1000) 38mm(1-1/2í¦) 2600(1182) 50mm(2í¦) 3000 (1362).
RP-99 is widely used as catalyst and adsorbent bed support in refining, petrochemical and gas processing applications, where low silica content or high density is required. Available sizes: 3mm, 6mm, 10mm, 13mm, 19mm, 25mm, 38mm, 50mm, 75mm Chemical composition: SiO2 í_0.20% Al2O3 í¦99.2% CaO 0.08% TiO2 0.05% MgO 0.05% K2O 0.04% Na2O 0.09% leachable Iron less than 0.01% Physical properties: Free volume (%) 40 Water absorption (wt. %) ú+3 Hardness, Mohsí» ú+8 Particle density ( gm/cc ) 3.5 Bulk density (kg/m3) 1900-2100 Maximum operating temperture(íµ) 1800 Crush Strength size Crush strength, lbs(kg) 3mm (1/8í¦) 200 (90) 6mm (1/4í¦) 450(205) 10mm (3/8í¦) 880 (400) 13mm(1/2í¦) 1870 (850) 19mm(3/4í¦) 2860(1300) 25mm(1í¦) 3740(1700) 30mm(1-1/4í¦) 3740(1700) 38mm(1-1/2í¦) 4840(2200) 50mm(2í¦) 5500 (2500).
RP-G ceramic grinding balls are widely used in industries of ceramics, glass, porcelain enamel, pigment, chemicals, etc. They are suitable for applications for ball mill, sand mill, pot mill librating mill and other fine breaking plants with high hardness, high density and anticorrosion. Available sizes: 10mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 80mm RP-G92 RP-G90 RP-G85 Al2O3, % More than 92 More than 90 More than 85 SiO2, % Less than 4 Less than 5 Less than 10 Fe2O3, % Less than 0.2Less than 0.2 Less than 0.3 Bulk density, g/cm3 3.65 3.55 3.4 Abrasion, % 0.01 0.15 0.02 Hardness, Mohsí» 9 9 8.5 Water absorption, % 0.01 0.01 0.01 Crush stength, Mpa/m3 2200 1800 1700.
It is available in diffrent sizes Same as above
This superthin cutting disc for stainless steel is our new push product. the performence and using life have increasing much comprised with normal superthin cutting disc. SHARK superthin cutting disc for stainless steel have following advantages: 1) The using feeling is very sharp and comfortable. 2) Won't burn the work piece's surface 3) Especailly this disc have a very different & nice apperaence-both the disc's edge color is black and inner color is green.( Special arw abrasives) 4) Very long time using life 5) This disc have two reinforce net thuogh the thickness is very thin.also these two reinforce net have assure the using safe request. Discs' size Details 41AA1051016 105*1*16 4x1/24x5/8 41AA1151022 115*1*22.2 4-1/2x1/24x7/8 41AA1151222 115*1.2*22.2 4-1/2x3/64x7/8 41AA1151622 115*1.6*22.2 4-1/2x1/16x7/8 41AA1251022 125*1*22.2 5x1/24x7/8 41AA1251222 125*1.2*22.2 5x3/64x7/8 41AA1251622 125*1.6*22.2 5x1/16x7/8 41AA1501022 150*1*22.2 6x1/24x7/8 41AA1501222 150*1.2*22.2 6x3/64x7/8 41AA1501622 150*1.6*22.2 6x1/16x7/8 41AA1801622 180*1.6*22.2 7x1/16x7/8 41AA2301922 230*1.9*22.2 9x3/32x7/8.
FLAP DISC TYPE Z for universal maching tasks with very high stock removal rates and heavy-duty use Application:for grinding tasks such as weld seam dressing on planar surface,sutiable for duty deburing and beveling work on stainlesss and high temperature steels. Advantages of type Z 1.Very high stock removal rate 2.Very short maching times 3.Cool grinding properties prevent thermal damages 4.Made of zirconia alumina grain with a high grit strength for maxmum grinding efficiency in general purpose applications. Grit Size: 40#,60#,80#,120#,180#,220#,240#,280#,320# Disc Size: 4",4.5",5",6",7" T27 FLAT TYPE T29 ANGLE GRINDING TYPE 27Z10016Y 100*16 4x5/8 27Z11522Y 115*22.2 4-1/2x7/8 27Z12522Y 125*22.2 5x7/8 27Z15022Y 150*22.2 6x7/8 27Z18022Y 180*22.2 7x7/8
General Information: SHARK no woven flap wheels are the ideal abrasive tools for the finishing cleaning, or debarring of metal and can be used on both flat and contoured surfaces SHARK provide full-line dimension flap wheels to meet different polishing & cleaning & finishing request ion. Advantages : 1.The effect is excellent in the fine finishing 2.Low noise to protect users' health 3.Cool polishing properties prevent thermal damages 4.Simple and rapid operation DXTXH (MM) DXTXH(INCH ) Speed (rpm) Grit Size 40x25x6 1-1/2x1x1/4 15300 60#-600# 40x30x6 1-1/2x1-1/5x1/4 15300 60#-600# 40x35x6 1-1/2x1-2/5x1/4 15300 60#-600# 40x40x6 1-1/2x1-1/2x1/4 15300 60#-600# D=50MM DXTXH (MM) DXTXH(INCH ) Speed(rpm) Grit Size 50x25x6 2x1x1/4 12300 60#-600# 50x30x6 2x1-1/5x1/4 12300 60#-600# 50x35x6 2x1-2/5x1/4 12300 60#-600# 50x40x6 2x1-1/2x1/4 12300 60#-600# 50x50x6 2x2x1/4 12300 60#-600# D=60MM DXTXH (MM) DXTXH(INCH ) Speed(rpm) Grit Size 60x25x6 2-2/5x1x1/4 10200 60#-600# 60x30x6 2-2/5x1-1/5x1/4 10200 60#-600# 60x35x6 2-2/5x1-2/5x1/4 10200 60#-600# 60x40x6 2-2/5x1-1/2x1/4 10200 60#-600# 60x50x6 2-2/5x2x1/4 10200 60#-600# D=70MM DXTXH (MM) DXTXH(INCH ) Speed(rpm) Grit Size 70x25x6 2-4/5x1x1/4 8600 60#-600# 70x30x6 2-4/5x1-1/5x1/4 8600 60#-600# 70x35x6 2-4/5x1-2/5x1/4 8600 60#-600# 70x40x6 2-4/5x1-1/2x1/4 8600 60#-600# 70x50x6 2-4/5x2x1/4 86006 0#-600# D=75MM DXTXH (MM) DXTXH(INCH ) Speed(rpm) Grit Size 75x25x6 2-4/5x1x1/4 8600 60#-600# 75x30x6 2-4/5x1-1/5x1/4 8600 60#-600# 75x35x6 2-4/5x1-2/5x1/4 8600 60#-600# 75x40x6 2-4/5x1-1/2x1/4 8600 60#-600# 75x50x6 2-4/5x2x1/4 8600 60#-600# D=80MM DXTXH (MM) DXTXH(INCH ) Speed(rpm) Grit Size 80x25x6 3-1/8x1x1/4 7600 60#-600# 80x30x6 3-1/8x1-1/5x1/4 7600 60#-600# 80x35x6 3-1/8x1-2/5x1/4 7600 60#-600# 80x40x6 3-1/8x1-1/2x1/4 7600 60#-600# 80x50x6 3-1/8x2x1/4 7600 60#-600#
Chopsaw wheel for Metal & Steels 41A3003025 300*3*25.4 12x1/8x7/8 41A3503025 350*3*25.4 14x1/8x7/8 41A4003025 400*3*25.4 16x1/8x7/8
White fused aluminium oxide is made with an electric furnace from high-grade alumina powder as raw material. The resulting mineral has higher hardness and slightly lower toughness than brown fused alumimium oxide. Characterized by its high purity, strong grinding ability, abrasive tools made of it are suitable for grinding and polishing of cutting tools, precision-castings, spraying and coasting, medium body for chemical industry applications, special ceramics and high-grade refractory materials. 1 mt in a jumbo bag
Chemical analysis Color sio2 al2o 3fe2o3mnomgocao Grey35-4018--200.9-1.00.5-2.00.2-1.42.2-3.9 Physical characteristics Basic mineralsio2, al2o3 Colourbrown, red Density3.90g/cm3 min Mohs hardness7.4-8.0 1 mt in a jumbo bag
Brown aluminum oxide abrasive is fused and crystallized under high temperature from a mixture of bauxite and other materials. It is characterized by its high hardness, good toughness and sharp shape in particles. Suitable for grinding metals of high-tensile strength such as carbon stele, general purpose alloy steel, malleable cast-iron and hard bronze etc. 1 mt in a jumbo bag
Grains: Alumina, Zirconium Alumina Grits:40#-400# Application: It is widely used in and the ideal choice for the industries of metallurgy, machinery, automobile, shipbuilding, aviation, light industry, timbering, furniture, building materials, tanning and textile (butt joint, lap joint and waves joint can be made)
1.Zirconia flap disc, with fiberglass backing pad Size :4" ,5/8", 4-1/2", 5",6í¦ ,7" grits:40#-120# abrasive cloth utilization ratio:95% 2.Aluminum Oxide flap disc, with fiberglass backing pad Size :4" ,5/8", 4-1/2", 5",6í¦ ,7" grits:40#-400# abrasive cloth utilization ratio:95% note:our abrasive cloth is from Korea,japan,germany,the flap discs are designed into two types of straight face and angle face for meeting different requirement
two kinds of flap wheel can be available: 1: Flap wheel with metal center specification:diameters:2í¦-20í¦,width:3/4í¦-7í¦ and various specific spec. features:it has the sharp grinding and cutting blades and high security and is ideal for surface polish of metals Applications:it can be mounted on various automatic and manual lapping machines for the grinding and polishing operations,suitable for all sorts of metals. 2: Flap wheel with plastic core specification:width:1í»í»2í»í»and other specifications,diameters:4í»í» 6í»í» 8í»í» 10í»í» 12í»í» and other spec. features:it is poured and injected for molding directly once with high-temperature glue,so that the safety and the adaptability for various specifications of middle holes have been improved. Grits:40#-400# Flap Wheels are manufactured from strips of high quality aluminum oxide material closely packed and radically bonded to a shaft or metal center. These wheels are more durable and provide a longer and cooler cutting action than is possible using conventional discs. Recommended for cleaning, deburring, blending, and polish grinding on stainless steel, aluminum, etc. Conformable to most shapes, they are available in coarse to fine grit.
Purchasing - looking for suppliers off spec, converted (or we willl convert)for building trade Rolls width 1 meter, 50 square meters, on cores, palletized, full container loads
Specification: Purpose Grit No. Chemical composition (%) Al203 Fe203 Si02 Ti02 F4-F80 95.0Min 0.3max 1.5max 3.0max For abrasive F90-F150 94.0Min 0.3max 1.5max 3.0max F180-F240 93.0Min 0.3max 1.5max 3max P4-P80 95.0Min 0.3max 1.5max 3.0max For abrasive P90-P150 94.0Min 0.3max 1.5max 3.0max P180-P240 93.0Min 0.3max 1.5max 3max For abrasive W1-W63 92.5Min 0.5max 1.8max 4.0max 0-1mm 94.5Min 0.3max 1.5max 3.0max 1-3mm 95.0Min 0.3max 1.5max 3.0max For refractory 3-5mm 95.0Min 0.3max 1.5max 3.0max 5-8mm 95.0Min 0.3max 1.5max 3.0max 8-12mm 95.0Min 0.3max 1.5max 3.0max 0-3mm 94.0Min 0.3max 1.5max 3.0max 0-5mm 94.0Min 0.3max 1.5max 3.0max For refractory 0-10mm 94.0Min 0.3max 1.5max 3.0max 0-25mm 94.0Min 0.3max 1.5max 180mesh-0 93.5Min 0.5max 1.8max 3.5max For refractory 220mesh-0 93.5Min 0.5max 1.8max 3.5max 320mesh-0 93.5Min 0.5max 1.8max In 1MT Big Bag ,In 25kg plastic woven bag,40 bags in 1MT Big Bag
Specification: Chemical composition(%) Al203 Zr02 Ti02 Si02 ZA40 50í¬60 38í¬44 1.0 Max 0.5Max ZA25 68í¬72 24í¬30 1.0 Max 0.5Max In 1MT Big Bag, In 25kg plastic woven bag, 40 bags in 1MT Big Bag
Purpose Specification Chemical composition(%) Al203 Nao Cao F12-F80 99.0Min 0.5Max 0.4Max For abrasive F90-F150 98.5Min 0.6Max 0.4Max F180-F240 98.2Min 0.7Max 0.4Max For abrasive W1-W63 97.5Min 0.8Max 0.5 Max 0-1mm 99.0Min 0.5Max 0.4Max 1-3mm 99.0Min 0.5Max 0.4Max For Refractory 3-5mm 99.0Min 0.5Max 0.4Max 5-8mm 99.0Min 0.5Max 0.4Max 8-12mm 99.0Min 0.5Max 0.4Max For Refractory 0-180mesh 98.5Min 0.5Max 0.4Max 0-220mesh 98.5Min 0.5Max 0.4Max 0-320mesh 98.5Min 0.5Max 0.4Max In 1MT Big Bag, In 25kg Plastic woven bag, 40 bags in 1MT Big Bag
Specification Chemical composition(%) Al203 Fe203 Si02 Ti02 TC 0-1mm 97.5min 0.3max 0.5max 1.0max 0.1max 1-3mm 97.5min 0.3max 0.5max 1.0max 0.1max 3-5mm 97.5min 0.3max 0.5max 1.0max 0.1max 5-8mm 97.5min 0.3max 0.5max 1.0max 0.1max 8-12mm 97.5min 0.3max 0.5max 1.0max 0.1max 180mesh-0 97.5min 0.3max 0.5max 1.0max 0.15max 220mesh-0 97.5min 0.3max 0.5max 1.0max 0.15max 320mesh-0 97.5min 0.3max 0.5max 1.0max 0.15max In 1MT Big Bag, In 25 plastic woven bag,40 bags in 1MT Big Bag
