The mass material by elevator, conical screw feeding machine, extruder, cutting, cooling, screening and terminal silo produce processing full automation .After the material were refined , trough feeding it is forced to enter the single screw extruder . The core of the screw is connect with water, and the screw is completely dispersed without excessive friction heat.Excellent dispersion effect, the current of main machine is small, energy saving and environmental protection.The precise temperature control of the rubber granulator ensures the technology of low temperature granulation and the special isolation agent recovery system, which can effectively solve the dust problem in production. Moreover, the added isolation agent will not cause too much waste.The recovered isolator can be reused.
The biggest technical characteristic of the rubber granulator is that it adopts the cold processing , which has the characteristics of low processing temperature,
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
1204 Rubber Machinery Suppliers
Short on time? Let Rubber Machinery sellers contact you.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Banbury Rubber Mixer Machine
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running.
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous operating mixing machine
Sandychen:
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
it takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running.
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long.
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
1204 Rubber Machinery Suppliers
Short on time? Let Rubber Machinery sellers contact you.
