We are trading in product of power transmission line hardware fittings. Manufacturing/ forged department is our sister concern part that is why we are able to give you best quality and competitive rate. Our product ranges are 33kv to 400kv. But we are able to provide you all hardware as per your requirement (product load, map-size, drawing, etc…) We are able to provide you our entire product with all standard testing and/ or as per your requirement. . Our products size are depend on particular requirement. It is 33kv to 400kv. That is why size is different.
LED Power supply 60W 1 Output power: 60w 2 Output volt:12v/24v 3 Output Currency: 5A/2.5A 4 For all the LED lighting 5 Waterproof class: IP67 6 Certificate: CE, ROHS, SAA, C-TICK. 1 piece in one canton box.
ASTEC DS650-3 (12V output Bulk Front-end) 650W Distributed Front-End Power Features: 1) Active Power Factor Correction 2) EN61000-3-2 Harmonic Compliance 3) Active AC Inrush limiting 4) High Density 5) No Min Load Required 6) Hot Plug Operation 7) N+1 Redundant 8) Internal OR-ing FET's 9) Active Current Share 10) I2C Interface 11) Smart Fan Speed Control Electrical Specifications: Input 1) Leakage Current: 1.4 mA @ 240 VAC 2) EMI/RFI: Class B 3) Effiency: 85% Typ 4) Input Range: 90 - 264 VAC 5) Frequency: 47 - 63 Hz Output 1) Main Output: Refer to Model Selection 2) Protection: OCP/OVP/OTP.
ASTEC DS650-3-002 650W Distributed Front-End Power Features: 1) Active Power Factor Correction 2) EN61000-3-2 Harmonic Compliance 3) Active AC Inrush limiting 4) High Density 5) No Min Load Required 6) Hot Plug Operation 7) N+1 Redundant 8) Internal OR-ing FET's 9) Active Current Share 10) I2C Interface 11) Smart Fan Speed Control Electrical Specifications: Input 1) Leakage Current: 1.4 mA @ 240 VAC 2) EMI/RFI: Class B 3) Effiency: 85% Typ 4) Input Range: 90 - 264 VAC 5) Frequency: 47 - 63 Hz Output 1) Main Output: Refer to Model Selection 2) Protection: OCP/OVP/OTP.
Specification: 1. Part No: MSD-24V-80W 2. Input voltage:170Vac-265Vac 3. Output constant voltage: 24V 4. Current :3.3A 5. Size:187*69*43mm 6. Weight:1080g/pc 7. CE & RoHS.
Model:TPD-03402 Description: 12V/5V-2A dual voltage output for DVR power supply Input Condition : 100 to 240VAC 50/60 Hz 1.0A Max Input Rated Voltage : 100 to 240VAC Input Voltage Range : 90 to 264VAC Input Rated Frequency : 50/60Hz Input Frequency Range : 47Hz to 63Hz Input Current : 1.0A Max Input Inrush Current : 30A Max Input No Load Power Consumption : 0.5W Max At 115Vac/230Vac Efficiency : 80% Min Rated Output Power: 34W Output Voltage & Current : 12V/5V-2A Dual voltage Output Line Regulation : 1% Output Load Regulation : 5% Output Over Shoot : 10% Max Output Ripple And Noise : 1% Max Output Rising Time : 20ms Max At 115Vac Output Hold up Time : 8ms Min At 230Vac Protection : OCP OVP SCP OPP Dielectric Withstand Voltage : 3KV 5mA 60s Leakage Current : 0.25 mA At 230Vac Operating Temperature: 0 to 70 Storage Temperature: -10 to 85 Relative Humidity: 5 to 95%.
Model:TPD-04501 Description: OEM Nintendo Wii AC/DC Adapter,Swicthing Power Supply Input Condition : 100 to 240VAC 50/60 Hz 1.2A Max Input Rated Voltage : 100 to 240VAC Input Voltage Range : 90 to 264VAC Input Rated Frequency : 50/60Hz Input Frequency Range : 47Hz to 63Hz Input Current : 1.2A Max Input Inrush Current : 30A Max Input No Load Power Consumption : 0.5W Max At 115Vac/230Vac Efficiency : 85% Min Rated Output Power: 45W Output Voltage & Current : 12VDC / 3.7A Output Load Regulation : 5% Protection : OCP OVP SCP OPP Dielectric Withstand Voltage : 3KV 5mA 60s Leakage Current : 0.25 mA At 230Vac Operating Temperature: 0 to 70 Storage Temperature: -10 to 85 Relative Humidity: 20 to 80%.
Output Type: single output Input Voltage (V): 90VAC~132VAC/180VAC~264VAC (by switch) Input Current (A): 4.5A Max Efficiency: 75% Typ (230VACFull Load) Output Voltage (V): +48Vdc Output Current (A): 4.4A Rated Power (W): 211.2W Ripple/Noise (mVp-p): 150mVp-p Working Temperature (): -20 - +50 (refer derating curve) Withstand voltage(VAC):I/P-O/P:3KVAC,I/P-FG:1.5KVAC,OP-FG:0.5KVAC 1min Safety Standard: EN/UL60950-1,GB4943 EMC Standard: EN55022 Class B,EN61000-4-2,3,4,5,6,8,11 GB17626.5 Level3 Over voltage Protection: >115%-135% Rated output voltage Over Current Protection: N/A Over load Protection: >105%-150% hiccup mode,Auto recovery Short circuit Protection: Latched Over Temperature Protection: Auto reboot MTBF: 250K hrs 25 DimensionL*W*H(mm): 215*115*50mm Weightg/pcs: 680g/pcs.
80plus+ CE Certificate, 7*SATA, 3*4pin HD, 1*20+4pin, 1*FDD, 12cm or 14cm FAN, 1*PCIex 6pin, 1*PCIex 6+2pin, APFC, 1*P4, 1*8pin, I/O Switch. OEM packaging.
1, Input: 100 to 240V AC, 50/60Hz 2, Output power: 24W series 3, Output voltage: 3 to 24V DC 4, Output current: 10 to 4,000mA 5, Overload protection 6, Output over voltage protection 7, Short circuit protection 8, High efficiency Mini 75 % 9, DC socket (optional) 10, CEC power supply standard 11, CE approved 12, No Load Power Consumption ¡Ü 0.3 W at Rated Voltage 13, Ripple And Noise: Output voltage 1% 14, High-Voltage test : Primary to secondary: 3 kV 5 mA 60 S 15, Leakage Current : 0.5 mA (max) at input 240Vac 16, Operating Temperature Range 0--40¡æ 17, Storage Temperature Range: -20 --- 85¡æ 18, High Humidity Operation :+ 40 ¡æ and 90 ¡« 95% Humidity 19, Dimension : 74.0mm*41.0mm*47.5mm 20, Net weight: About 170 gram per unit. 21, Color : Black / White 22, The power adapter should have 50,000 hours according to MTBF. 23, Insulation Resistance:Primary to Secondary : 50 Meg. Ohms min. 500VDC. Customized.
Input Characteristics 1.Voltage: 90 ~ 264V AC Full range 2.Frequency: 47 ~ 63Hz 3.Input Current: 10.0A for 115VAC, 5.0A for 230VAC. 4.Inrush Current: 25A for 115VAC, 50A for 230VAC per power supply module. Output Characteristics: Output Voltage Max. Current +3.3V 25A +5V 25A +12V 41A -12V 0.8A +5VSB 3.5A Note: The combined total power from 5V & 3.3V shall not exceed 170W. 2pcs in 1 carton, N.W.: 9.5kgs, G.W.: 10kgs Carton size: 45x31x19cm
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; hold up time¡Ý20mS Cooling by free air convection; Auto recovery; Operation temperature: -40¡æ~+70¡æ; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50,000Hours, 2 years warranty Compliance to EN61347-2-13 /IEC61347-2-13 /UL8750.
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; Hold up time 20mS Cooling by free air convection; Auto recovery; Operation temperature: -10~+50; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50, 000Hours, 2 years warranty Compliance to EN60950 /IEC60950 /UL60950.
CO2 laser power supply, special power CO2 laser, YAG laser welding machine power source, YAG laser cutting machine power, fast-axial flow laser power, Helium-neon laser tube laser power, YAG krypton lamp laser power, laser power supplies, DC UPS, DC - DC converter, xenon lamp power supply, high voltage power supply, laser power accessories, AC voltage source, switching power supply series.
Neufeld Power is the low price leader in the manufacture of quality LED power supplies. Neufeld Power is a manufacturer specializing in low cost, high performance IP66 rated (dustproof and waterproof) constant current LED drivers and constant voltage LED power supplies with high efficiency built-in active Power Factor Correction (PFC) for both indoor and outdoor LED lighting applications. Neufeld Power is a manufacturer of quality LED power supplies that are high efficiency (up to 90% efficiency), durable (metal cased), long lasting (3 and 4 years factory warranty) and comply with international standards. Neufeld Power is committed to providing our clients with unbeatable value and service and the most cost-effective manufacturer solutions for LED power supplies in the world: 20W IP66 LED power supplies and drivers from US$ 2.45, 60W IP66 LED power supplies and drivers from US$ 6.50 (2011/12). Visit the Neufeld Power website for full details and to receive our free price list today. Neufeld Power offers a large range of low cost, high performance LED driver and power supply manufacturer services including OEM LED driver and power supply manufacturer services, ODM LED driver and power supply manufacturer services, private label manufacturer services and international certification/standards LED driver and power supply manufacturer services. IP66 LED Driver Power Supply Prices (2011/12): 10W ... from US$ 2.15 15W ... from US$ 2.25 20W ... from US$ 2.45 30W ... from US$ 3.85 50W ... from US$ 5.25 60W ... from US$ 6.50.
Feature: Comply with Intel TFX12V V2.1 24PIN connector for M/B MTBF 50,000 hours at 25 Perfect circuit board layout for excellent heat dissipation EMI: EN55022 Class B Specifications: AC input voltage: 180 TO 264 VAC AC input frequency: 47/63 Hz AC input current: 6 A RMS MAX. FOR 230 VAC Maximuminrush current: 120 A FOR 230 VAC Cold start Line regulation: 1% Load regulation: 5% (Only -5V, 12V10%) Minimumload: +5V/2.0A+12V/1.0A Ripple&noise: +3.3V/80mV +5V/80mV +12v/150Mv -12V/240mV +5VSB/80Mv Efficiency: 70% Minimum at full load Operating temperature: 0~+50 Storage temperature: -40~+85 Storage humidity: 10%~90% Mean time between failure: 20K HOURS MINIMUM AT 25 Size (L*W*H): (180+55)mm*90mm*70mm MODEL WATT DC OUTPUT +5V&+3.3V +5V +12V/V1 +12V/V2 -5V -12V +3.3V +5VSB EZ250ATX 250W 11A 5A 12A / 0.5A 9A 2A 75W EZ300ATX 300W 13A 6A 15A / 0.5A 10A 2A 80W EZ350ATX 350W 17A 8A 18A / 0.5A 12A 2A 90W EZ400ATX 400W 19A 10A 21A / 0.5A 14A 2A 100W EZ500ATX 500W 23A 14A 27A / 0.5A 18A 2A 120W EZ600ATX 600W 28A 18A 33A / 0.5A 23A 2.5A 150W 10pcs/box.
Input voltage: DC24/48/110V Output voltage options: DC5/12/24V Output Power: 50W Size: 61.00 x57.90 x 12.70mm / 2.40x2.28 x0.50 inch HDL series power range: 50-350W. Small size, half brick design Wide input voltage range Typical efficiency 90% Switching frequency: 300KHz Overcurrent /Short circuit protection, Self-furbish Input-output isolate Board in-line type installs Metal case, Low Output Ripple High power density.
Input voltage: DC 5/12/24/48V Output voltage options: DC5/9/12/15/24V Output Power: 2W WR power range: 1W-2W. Wide inputvoltage range; Isolation; Regulated output; 1W Isolation voltage: 1500VDC, 3000VDC Efficiency: 80% Working temperature: -40C~ +85C MTBF¡Y 10¡¨¢ 105Hrs In line with RoHS codes Line Regulation(once input change 1%) ¡¨¤0.2% Load regulation(10%-100% full load) ¡¨¤0.5% Ripple and noise (20MHz Band width)
Power supply 12V/1A power adaptor. Laptop Adapter, CCD Camera Lenses, Dome CCD Cameras, CCD Camera Parts and Accessories, CCD Cameras, CCTV Components, CCTV Decoder. CCTV Monitors, Infrared Illuminators, Quad Processors, Wireless CCD Cameras, Bracket, Housing, DVR. Power supply 12V/1A power adaptor.
Features: Low ripple and low noise High resolution and accuracy (0.1mV/0.01mA) Built-in high-accuracy 5 1/2 voltmeter and milliohmmeter Supporting high-accuracy and dynamic programming output High-luminance VFD screen with two lines& four channels display Intellegent fan system fan will be automatically initiated according to the temperature Supporting remote voltage compensation and multidata storage Supporting external trigger input and output Power-on-self-test, software calibration and standard rack mount Using standard SCPI protocol Communication mode: GPIB/RS232/RS485/USB M8813(0-150V/0-1A/150W)
