DIN Rail Industrial Powerline Ethernet BridgeMaster Brief introduction DIN Rail Industrial PLC Ethernet Bridge Master is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. Can be used in one phase or 3 phases ,The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc.. 1.1 Highlight 1.1.1 Technical parameters Support G.hn. Industrial DIN rail style installation Actual bandwidth up to 400Mbps The maximum transfer distance up to 1000 meters Self-adapt the rate Compatible with all G.hn devices One Domain Master can manage 15pcs End Point There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit 1.1.2 Manageability Support Remote Firmware update(TR069) 802.3D Ethernet Bridge 802.1Q VLAN Quality of Service(QoS) IGMO(IPv4)Snooping&MLD(IPv6)Snooping Support local web management 1.1.3Operating environment Working temperature: -40-80 Operating humidity: 10%-85% no condense Storage humidity:5%-90% no condense 1.1.4Design standards ITU-T G.9960 IEC 60529 IEC 50022 IEC 60068-2-6 MIL-STD-810G 1.2 Features Packet loss.1%?100M,load 70% Support 7*24 hours all weather operation hardware watch dog function PING2MS The quantity of the group 16pcs 1.3 Immunity of ESD The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.