- Due to circulational cooling system the pressing process is done faster. - There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer. - There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable. - Press head lifters are designed to prevent swashes of the head of the machine. -Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same. -After recent modifications the quality of covering of wood pieces with PVC has risen. -The machine is extremely easy for use, so it can be used even by low-qualified workers. -There is one machine better than this one- it is membrane-vacuum press with additional air pressure. Vacuum 40 m3/hour The dimensions of the machine 2800 x 1600 mm x 1500 mm Total power 27,5 Kw The dimension of the worktable 1400 x 2500 mm The area of the worktable used 1200 x 2300 mm The time required for pressing process (up to material) 2-20 min. Circulational cooling system The system of automaic fixing of PVC or similar materials. Automatic vacuum system Weight 600 кg
