40 Micron Stainless Steel Sintered Wire Mesh Filter Element is a type of filter that is made by sintering multiple layers of stainless steel wire mesh together. Sintering is a process that involves compacting and heating a material without melting it, which causes the particles to fuse together and form a solid mass. Parameter Material:stainless steel Grade:SS 316L, SS 304L, SS 316, SS 304 OD: Max. 200mm Length: Max. 1500mm Accuracy / Pore Size: 0.2um-200um Porosity: 30%-60% Temperature resistance: â?¤300â?? Technique: Sintering Process Surface: Smooth, clean and metallic The function of each layer in the five-layer stainless steel wire mesh sintered filter element: Outer Protective Layer: The outermost layer of the filter element is usually a coarse mesh that serves as a pre-filter to capture larger particles and prevent them from clogging the finer inner layers. This layer also protects the finer inner layers from damage. Intermediate Protective Layer: The second layer is also a coarse mesh that provides additional protection to the finer inner layers. This layer helps to prevent the filter element from being damaged by high-pressure or high-velocity fluid flows. Inner Filter Layer: The third layer is composed of a finer mesh size and serves as the primary filter layer. This layer is responsible for capturing smaller particles that were not captured by the outer protective layers. Reinforcing Layer: The fourth layer is a coarser mesh size than the inner filter layer and serves as a reinforcing layer. It provides mechanical support to the inner filter layer and helps to prevent it from collapsing under high-pressure or high-velocity fluid flows. Inner Protective Layer: The fifth and final layer is the finest mesh size layer that provides additional protection to the inner filter layer. This layer captures the smallest particles and prevents them from passing through the filter element. Feature 40 Micron Stainless Steel Sintered Wire Mesh Filter Element has several advantages over other types of filters. First, it has a uniform and controlled pore size, which ensures consistent filtration performance. Second, it has a high dirt-holding capacity, which means that it can capture a large amount of contaminants before needing to be cleaned or replaced. Third, it has excellent mechanical strength, allowing it to withstand high pressures and mechanical stresses. Fourthly, it can be cleaned and reused, making them a cost-effective and environmentally friendly filtration solution. Application 1.Chemical Processing 2.Oil and Gas Industry 3.Food and Beverage Processing 4.Pharmaceuticals 5.Water Treatment
