Stainless Plate Heat Exchanger: 1. Structural characteristics of stainless steel plate heat exchanger Stainless steel plate heat exchangers are mainly divided into flat plate heat exchangers and plate heat exchangers. The main advantages are reflected in the characteristics of easy disassembly, good cleaning, convenient maintenance, small size and small footprint. There are also many people asking whether to add an insulating layer. The heat loss of the stainless steel plate heat exchanger in the air is 1%, and the insulating layer is basically unnecessary. Second, the characteristics of stainless steel plate heat exchanger plates The stainless steel sheet is mainly formed by one-time stamping. What are the main advantages of doing so? 1. The corrugation depth of each plate is the same to ensure that each contact point can be well connected. 2. The weight of the heat exchanger equipment can be reduced, and a higher heat transfer coefficient can be obtained under the requirement of being able to withstand pressure. 3. There is no excessive punching area on the plate, and no invisible cracks will appear. 4. The thickness of the plate can reach 0.3mm. The plate of the stainless steel plate heat exchanger has a strong pressure bearing capacity, which can prevent the mechanical fatigue caused by the shaking caused by the vibration. Third, the advantages and disadvantages of stainless steel plate heat exchanger The main advantages of stainless steel plate heat exchanger are: 1. Scaling is not easy to occur, because turbulent water can effectively reduce the possibility of scaling. To prolong the working cycle, chemical cleaning methods are generally used for cleaning. It can effectively reduce human, financial and material resources. If you are not familiar with the fouling treatment method of plate heat exchangers, you can poke into this article to browse. 2. Compact structure and small size, can be used in multiple places. And the heat transfer is good, and the equipment is light in weight. 3. The speed of the fluid is uniform, and the material is heated during the period of time without overheating. The main disadvantages of stainless steel plate heat exchangers are: 1. As mentioned above, the thickness of the sheet is thinner and the pressure bearing capacity is lower, especially the contact points formed between the corrugated sheets. With the prolongation of use time, the pressing size will exceed the installation size, which may easily lead to the formation of pressure pits at the contact point, which may lead to perforation and lead to the scrapping of the plate. 2. The space between the plates is narrower and the evaporation time used is shorter. If the hot and cold medium is exchanged between the liquid material and the corrugated plate, if the material is cut off, it will be in a coking state, and the coking material will block the cold material passage and cause damage to the sealing gasket.