Compared with the casting process, the forging process of 17GL7-1 scraper conveyer can make the hardness, strength and service life of the scraper more in line with the service requirements. But the forging process of 17GL7-1 scraper is difficult to be controlled in the actual production process. The following coal manufacturers double zhi machine will give you the introduction of 17GL7-1 scraper forging process of the three points. 1. Heat the scraping slab The main purpose of heating 17GL7-1 scraper blank is to increase its hardness, toughness and service life. When 17GL7-1 scraping slab is heated and tempered, the oxide layer on the surface of the slab is constantly knocked out to ensure the hardness and toughness of the product, and meanwhile, the smoothness and flatness of the surface of 17GL7-1 scraping slab is also ensured. In the process of shaping the billet, the temperature should be lowered to about 1100 degrees Celsius to achieve a good shaping effect and increase the plasticity of the scraper. 2. Control of quenching temperature After being heated and tempered, the 17GL7-1 scraper needs to be put into water to be quenched, so that the hardness and strength of the 17GL7-1 scraper are strong. Quenching temperature control is the key and difficult point in the forging process of scraper. Good temperature control can ensure the quality of the scraper and the surface flatness. If the temperature difference is too big, it will lead to the surface of the scraper crack. In quenching, the need to choose the appropriate quenching temperature according to different scraper material. When quenching, field tests should be carried out to control the hardness value. After the scraping plate quenching, but also for the scraping plate residual temperature treatment. 3. Impact energy of a forging hammer China's scraper conveyor production started late, the initial use of the type of die forging hammer is relatively small, the hardness and quality of the die forging hammer is greatly limited, the impact energy of the die forging hammer is far unable to reach the production of the strike energy required by the scraper. The hydraulic force is then used to increase the impact energy of the hammer. The impact quality of the die forging hammer meets the requirements of the scraper manufacturing, the production of 17GL7-1 scraper quality, hardness can be qualified. The above is the key and difficult points of 17GL7-1 scraper forging process. Henan Shuangzhi Machinery Equipment Co., Ltd. based on the coal machine industry for many years, mature technology, diversified equipment, the production of coal machine parts forging strength, high hardness, strong toughness, well received by customers, if you have coal machine parts procurement needs, you are welcome to inquire, to visit the factory.
