Buyer is interested to receive quotations for the following RFQ -
Product Name: Ultra-Low Sulfur Diesel (ULSD)
Specifications :
1. Ultra-Low Sulfur Diesel (ULSD)
2. Description: Diesel fuel suitable for use in a variety of diesel engines, optimized for environmental standards and performance.
3. Sulfur Content: Less than 50 ppm (parts per million).
4. Density: Greater than 0.830 kg/m3 at 15 C.
5. Viscosity: Greater than 3.0 cSt at 40C.
6. Flash Point: Greater than 65C (149F).
7. Cetane Number: Minimum 45 indicative of the ignition quality of the diesel.
8. Cloud Point: Maximum -5 C the temperature below which paraffin wax in diesel starts to solidify, making it unsuitable for certain conditions.
9. Water & Sediment: Maximum 0.05% by volume ensures no contaminants or excess moisture that could harm the engine.
10. Distillation:
- 90% recovered at a temperature no greater than 360 C.
- End point: Maximum 370 C indicative of the distillation range for the majority of the fuel.
11. Carbon Residue (10% distillation residue):
Maximum 0.35% helps predict potential soot generation.
12. Lubricity (HFRR @ 60C): Wear scar diameter no greater than 460 micrometers indicative of the fuel''s lubricating properties.
13. Ash Content: Maximum 0.01% by weight ensures minimal abrasive solids.
14. Acidity (Total Acid Number): Maximum 0.3 mg KOH/g indicates the amount of potentially corrosive acids in the diesel.
15. Stability (Total Sediment Potential): Maximum 0.01% by mass indicative of the fuel's resistance to form sediments.
16. Copper Corrosion (3 hours @ 50 C): Maximum Class 1 ensures the fuel does not corrode fuel systems.
Quantity: 270,000 MT/year
Quantity Required : 270000 Metric Ton/Metric Tons Yearly
Shipping Terms : FOB
Destination Port : Other-Not Shown
Payment Terms : DDP
Looking for suppliers from : Worldwide
Contact : Samay Mangalagiri
