Hydraulic Filter

The company deals with a wide range of Hydraulic Filters in the industry. The High Pressure Hydraulic Filters which we deliver in the market are effectively used for removing contaminates from the hydraulic fluid, which can reduce the services line of the system components through observe wear. These filters reduce hydraulic system’s downtime and hence improve the performance of the system. They also help in reducing component repair cost of the system. In addition to this, we are one of the major Exporters of Hydraulic Lubrication Filters. We manufacture all types of import substitute filters as per customers requirement. The total R&D, and also modifications for the existing system can be provided. In line low-high pressure, simplex, duplex, tank top mounted, returnline filters for hydraulic lubricating oil applications for stationary & mobile applications. Hydraulic filters removes the particles contaminants from the hydraulic fluid, which can diminish the service line of system components through observe wear. Contamination is the major failure in Hydraulic systems. Hence Failure Leads to down time, component and fluid replacement & high maintenance charges. Hydraulic filters provide very good protection against contamination & improve predictable realibility of the hydraulic system & components. Why Hydraulic Filtration ? Lower total operating cost. Reduce system downtime Reduce expensive component replacement Reduce component repair cost Improve system performance Reduce oil purchase & disposal cost.

Glass Fibre Filtering Media Absolute Filtration Higher particle hold capability Used for mineral oils, hydraulic oils and lubrication oils Available in 3m ,6m 10m, 20m, 30m and many others on request Paper Filtering Media Made of paper and Cellulose High material stability and strength Available in 10 m & 25 m ,other micron ratings on request Stainless Steel Wire Mesh Filtering Media Nominal Surface Filtration Provides high resistance with Longer Filter Life and also Cleanable partially Available in 2 to 500m variety

Apply for caterpillar excavators. Od: 96 height: 178

Hello, I'm China Langfang First Filter Equipment Co., Ltd., which supplies hydraulic filter elements and engine oil filter elements. Fuel filter element, air filter element, etc

Instructions for use 01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.

We offer a wide range of high pressure filtration solutions to meet with your fluid power transmission system requirements. Hydraulic High Pressure Inline Filters Models : MS450-040 ,063 ,100 ,160 ,250 ,400 Pressure line filters are installed on the hydraulic system line and ensure that the used oil is constantly filtered / cleaned. Return Line Filter Element Filter Element DIN Standard 24550 Models are ; MS010-040, 063, 100, 160, 250 Return filters are located on the return line of the fluid to the tank on the hydraulic systems. It filters the materials formed in the system like dirt, filth, etc. and ensures that the hydraulic fluid in the tank is clean. Usage Areas are ; Industrial Hydraulic Mobile Hydraulic Marine Hydraulic Open-sea Hydraulic Space Hydraulic

We are specialized in producing kinds of filters: air filter, hydraulic filter,oil filter, fuel filter, water filter and elements. // Our products mainly used for industrial machinery and heavy duties: such as kinds of excavators, Dongfeng Cummins, Foton,Isuzu,Volvo, Hitachi, Komatsu, Sumitomo, Kobelco, Kato, Kubota, Sany, Hyundai, Doosan, Liebherr, Caterlillar, Case, Terex, JCB,etc.// General Product Information: Product Name: Hydraulic Filter. Descriptions: Material: ; galvanized sheet + HV Filter Paper . Patten: Dry. Usage: Protection for excavator engine. Features: 1. High temperature resistant2. High quality oil seal, no oil leakage. Packaging: as customer required.

Product nameHC9600FUT8H Material:glass Fiber Function:Oil removal filter efficiency:99 % Quality:original quality structure:Cartridge Filter OEM:Available Service Life:5000h

Operation Temperature: Materials:imported filter paper,PP,glass fiber,stainless steel wire mesh,etc. Filtration rating:0.1m-300m Working Environment:;Hydraulic sysytem Dimension:customized Flow rate:30-480L/min Differential Pressure:up to 480 bar Customized