Thread Rubber Joint

Thread Rubber Joint For transporting powder DN50 Thread Rubber expansion Joint Rubber expansion joint has the characteristics of good sealing, light weighting, easy to fix and maintain, also has long working expecting, but please keep far away from sharp metal in order to avoid breaking the rubber body. Equipped with the excellent comprehensive performances of rubber expansion bellows, thread rubber bellows can be used for lift and transportation of raw water and sewarubberge, transportation of water supply, cooling cycle water of thermal power plant, condensate water of metallurgy industry and chemical materials of chemical industries, cooling and dilution of oil and chemical industries and flexible connection of other industries. It is also suitable to transport all grain and powder material and gas for its high abrasive resistance. Due to its good integral function, flexible rubber joint is used widely in key projects of chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, health, fireproof and power, etc. Specification Working Pressure(Bar) 10 16 Bust pressure(Bar) 30 48 Vacuum(mm Hg) 400 650 MATERIAL LIST Item No. Parts Name Parts Material 1 Cover EPDM 2 Reinfording Fabric Nylon 3 Tube EPDM 4 Retain Rings Steel 5 Union Nut Carbon Steel 6 Un ion Screw Carbon Steel   TECHNICAL CONDITIONS Working pressure Mpa (kgf/cm2) 1.6(16) Angular deflection 45° Explosion pressure Mpa (kgf/cm2) 4.8 (48) Vacuum Kpa (mm/Hg) 53.3 (400) Applicable Temperature -15-115(-30-250 under special conditions) Applicable media water, sea water, hot water, air, compressed air, oil, acid, alkali and so on

Description: Rubber expansion joints, also called rubber compensators, are flexible connectors made of natural and/or synthetic elastomers and fabrics. If necessary, internal metal reinforcement materials can be used. These materials are designed to relieve thermal movement and piping system stress caused by mechanical vibration. Rubber expansion joint material: EPDM, NBR, NR Type: Single ball rubber expansion joint Double ball rubber expansion joint Flange connection rubber expansion joint Threaded rubber expansion joint Feature: 1. Good displacement compensation ability, capable of axial, lateral and angular displacement. 2. Low noise, good vibration damping and corrosion resistance. 3. High pressure resistance, good elasticity, good displacement effect and simple installation. Application: Rubber expansion joints can be widely used in heating and cooling devices, water pipes, desalination plants, compressors, blowers and fans, cement industry, chemical industry, glass industry, wood processing industry and other pipeline Systems

Thread Rubber Expansion Joint JGD-B Thread Rubber expansion Joint Rubber Jointhas the characteristics of good sealing, light weighting, easy to fix and maintain, also has long working expecting, but please keep far away from sharp metal in order to avoid breaking the rubber body. Equipped with the excellent comprehensive performances of rubber expansion bellows, thread rubber bellows can be used for lift and transportation of raw water and sewarubberge, transportation of water supply, cooling cycle water of thermal power plant, condensate water of metallurgy industry and chemical materials of chemical industries, cooling and dilution of oil and chemical industries and flexible connection of other industries. It is also suitable to transport all grain and powder material and gas for its high abrasive resistance. Due to its good integral function, flexible rubber joint is used widely in key projects of chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, health, fireproof and power, etc. Rubber Bellows Joints: 1, Versatile hand-built construction. Made in China 2, Absorbs directional movement 3, Absorbs vibration, noise and shock 4, Compensates for expansion 5, Wide flowing arch design 6, Virtually eliminates sediment buildup 7, Economical fully molded construction 8, High vacuum rating (up to 30" Hg) can be supplied for certain sizes 9, Special grooved flange ring design, prevent rubber end pulling out 10, Solid galvanized steel floating flanges speed the installation time 11, High tensile aircraft cable is embedded in the raised face rubber ends to prevent pull out and avoids the sharp cutting edge of solid steel rings 12, No gaskets required; integrally rubber flanged design, no gaskets required, DIN PN10/16 drilling standard, other flange drilling available, including ANSI 150lb/300 lb, BS, and JIS No. Part Material 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR CR IIR NR FKM EPDM PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 threaded union rubber joint Cast and forged carbon steel(Q235), Stainless steel(201, 304, 316, 321), Plastic(CPVC, PVDF, PPH, UPVC, RPP)

EPDM Hose over Fow Hardness-70ShoreA Diameter-100mm Diameter-125mm Diameter-150mm

Clamp Flexible Rubber Joint Clamped Rubber Joint Rubber Joint 1. Oil resistance Flexible Rubber Joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement axial expansion, etc. 2. According to different materials, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange standard: ANSI, JIS, BS, DIN, GB, ect Item No. Parts Name Parts Material 1 Hoop Q235 304 316L 2 Outler layer glue IIR, CR, EPDM, NR, NBR 3 Skeleton layer polyester cord 4 Inner layer glue IIR, CR, EPDM, NR, NBR

Type: Single Type, Double Type, BSP/NPT Thread Type Size Range: DN25-DN1600 Material of Rubber ball: CR, NBR, EPDM, HYPALON, VITON Material of flange: Galvanized Steel, Stainless Steel Working temperature: -20â?? to +115â?? Ball length for Single Sphere: 130mm, 150mm, 95mm-300mm Ball length for Double Sphere: 175mm-345mm Ball length for Union Type: 200mm for DN15-DN50, 240mm for DN65-DN80. Thread End Connection: BSP or NPT thread Flange End Connection: EN1092-1 PN10/PN16, ANSI150, BS4504, AS2129 Table D/E. Working Pressure: PN6, PN10, PN16, PN25 Application: water, warm water, seawater, weak acids, alkalis, etc... Easy installation and remove; absorbs vibration, noise and shock -

Types: Single Sphere, double-sphere; Flange Type, Union Type Flange drilling: ANSI class 125/150, DIN PN 10/PN16, JIS 5K/10K Working pressure: 1.6mPa (16 kgf/cm2) Working degree: -15 to +115 degrees Celsius Working medium: Vapour, compressed air, cold & hot water, seawater, oil, weak acid, alkali Material list: Body: Neoprene, EPDM, NBR Lining: Chinlon Cord Fabrics Frame: Hard Steel Wires Flange: Carbon Steel.

(1)we provide rubber expansion joint dn40, 50, 65, 80, 100, 125, 150, 200, 250, 300mm. (2)we can also produce double sphere. (3)low price. We produce various hose forming machine, so we have lower cost than others. (4)wide diameter range. Our machine can produce the hose minimum to dn 6mm. (5)high quality. Our company is an experts in producing the hose forming machine. Pls contact:tina.Li@fugeco.Com (1)we provide rubber expansion joint dn40, 50, 65, 80, 100, 125, 150, 200, 250, 300mm. (2)we can also produce double sphere. (3)low price. We produce various hose forming machine, so we have lower cost than others. (4)wide diameter range. Our machine can produce the hose minimum to dn 6mm. (5)high quality. Our company is an experts in producing the hose forming machine.