F.C:98%Min Ash:0.3%Max V.M:0.5%Max S:0.05%Max Moisture:1.0%Max
Graphite petroleum coke-GPC: is made from low sulfur and low nitrogen petroleum coke by 2500-3500°C temperature graphite annealing.As a highpurity carbon material, it has characteristics of high fixed carbon content,low ash,low sulfur,low resitance etc. GPC can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.
1.Mainly used in steelmaking in electrical stove, screening water, shipbuilding sandblast to remove rust.
2.Can reduce the cost of steelmaking effectively by replacing the traditional petroleum coke of carburant.
3.Used for steel making,can improve the Carbon content in steel-melting and Ductile iron foundry.
ackaging Details: water-proof plastic woven bag, 1000kg per bag or as your requirements.
Delivery Time: Within 20 days after receipt of prepayment.
Remark: Chemical composition and size can be optimized by the customers' requirements.
Product Properties 1ïHigh purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2ï Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3ïFine classification - Various product category, to provide customized carbon raising scheme 4ïCost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1ïFor 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. 2ïFor greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon. 4, Packing 1ï Net weight 25kg per unit 2ã?? As customer's request. 5, Storage 1ïKeep it away from water or moisture. 2ïAvoid direct sunlight and store in a dry & ventilated place. 3ï Industrial supplies, please do not eat.
Fixed carbon 98.5%min, s 0.05%max In 1 mt big bag
Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Petroleum Coke Product Description : Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries. Price of product ( USD price or FOB price) : 10.000 MT monthly market price. 100.000 MT monthly market price Less 8%. Product origin : Russia and Non Russia Key Specifications/Special Features : Fuel Grade Petroleum coke of Low/High Sulphur. Calcium Petroleum coke, Graphitized Petroleum coke. Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
We are supplier and exporter of Petroleum Coke. Petroleum Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.
Calcined petroleum coke (CPC) is created from green petroleum coke (GPC), a by-product of refining crude oil. Applications 1.Steel Foundry: carburant/graphite electrode/refractory material 2.Industry Field: brake pad/seal ring/friction plate/heat exchanger/lubricity 3.Battery Production: alkaline battery cathode/lithium ion battery cathode 4.Metallurgy:casting for glass production/graphite crucible/ anodes for the aluminium, titanium smelting industry 5.Others:glass sheet/pencil lead/clay bricks/conductive coating We are the leading manufacturer of carbon additives in China for 10 years, mainly produce graphite petroleum coke, calcined petroleum coke, pet coke and silicon carbide , meanwhile we can trade metallurgical coke and foundry coke as your requirement. The products are widely used in metallurgy, chemical industry, steel-making, casting industry and many fields.
Supplier: Petroleum coke (gpc), graphite, carbon additive
