gypsum board machine advantage :
1. Our machine produced the gypsum board quality can same good with knauf board. But the line price is very low than them.
2. Our machine is can removable, when finsihed produce the machine, can install in our factory and then move and shipping in our here, so it is easily to install on buyer's site.
3. Some parts ans steels can doing on site, we will using the raw materials doing on buyer,s site, so this will save more charge for shipping for buyers.
4. We provided the longlife technical and service.
some section introduce:
Rollers
1. material: stainless steel, normally we use AISI304
2. automatic welding, beautiful and high precision
3. supply 5% more when delivery
4. quantity: about 800 to 1500 pcs with different capacity
Finished machines gypsum board machine
1. name: forming machines
2. model: 5 models with different technology and prices
3. normal packing method: plastic package
The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift. 40 feet container for transportation.
According to the machine's process, the gypsum board production line can be divided into five parts: Ingredient and shaping system, centralized control system, auto board-enter, auto board-exit and drying system. The preparation, shaping, drying process is highly automatic, even the beginner can operate it. Auto board-enter system: Auto board cutter, belt conveyor, roller, board turnover machine, kiln enter distributor, faster board-enter and other equipment, through PLC auto control, the process of cutter, speed-up, kiln enter of gypsum board is finished.
1. PVC film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. 2. aluminum film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. It uses 40 feet containers to transport.
Paper gypsum board production line is the equipment which produces new building materials--paper gypsum board.Its production process is:ripe gypsum, water and all kind of ingredients that automatically precision measurement, by the continuous, automatic transmission system into the mixture into a homegeneous slurry spred to the continuous movement forward in the gypsum board surface of the paper, in advance process, after shock, the slurry was complete encapsulation of paper from top to bottom.And squeezed into the very rules slab, the slab continuous production line in the strict control of the speed and speed and stability to continue to move forward gradually formed a certain itensity, and shape the rules of wet gypsum board, the cut precision control system set by the precise cut into veneer.Veneer orderd by the control system topology, turning it over into the dryer.The drying temperature is strictly controlled, the board absorbed water lost to evaporation.Plate from the dryer, and advance the process of gradually cooling down the production line.After turns hostile every two stiff surface to fold once more gathers, saws after the reason the board both sides shuts off the regular size, transmits to the automatic hay stacker, piles up the end product waregousing.This prouduction line mainly by three major part is composed, namely.Material room, heating system, integral unit.
Supplier: Impact pulverizer machine, top roofing shed, grill works, all kinds of work will do neatly done
Services: Transportation
Buyer: Ms plates welding rods and all types of ms steels
Supplier: Roofing sheet, gc sheet and other pressed component products, beams, channels, ms pipes & other steel products
Services: Manufacturers
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)