Size: 75.1*26.6*13.8mm;
5.8GHz C-band microwave, on/off function;
Input voltage: 12/24V DC ( 5V DC version available on request);
Input current: â?¥25mA;
5V DC high-low voltage output signal;
Super compact, flexible to be integrated into any suitable fixtures;
Dual-processor technology, real Lux-off function for built-in application;
8 pin DIP switch setting, multiple options to meet different customer demands;
Detection range up to 12m in diameter;
Mounting height: 3-6m;
Operation temperature: -20~+70 degree;
RoHS compliant
The price is to be negotiated
5.8GHz C-band microwave motion sensor, tri-level dimming control; Operation voltage: 120-277V AC, 50/60Hz; Rated load: 400W@120V AC(capactive), 800W@200-277V AC(capactive); Stand-by power:
Low cost; 5.8GHz C-band miniature transceiver; Patch antenna, antenna gain:2 dBi. Beam aperture: 30º; 2 balanced mixer; 5dBm EIRP output power; Receiver bandwidth: 1Hz ~ 2KHz; Operating current(CW mode):13.5mA@5V; Low power consumption (Pluse mode); Average current:1.5mA typ. Pulse width (min.):10~50μs(10kHz~2kHz); Duty cycle:10% DC RoHS compliant Tested to EN300 400
DC motion sensor with 1~10V Dc output; 5.8GHz C-band microwave, tri-level dimming control; Input voltage: 12/24V DC 1~10V DC putput signal; Super compact, flexible to be integrated into any suitable fixtures; Dual-processor technology, real Lux-off & daylight monitoring function for built-in application; IR remote commissioning, easy setting and user friendly; Detection range up to 12m in diameter; Mounting height: 3~6m; Operation temperatue: -20~+70degree; RoHS compliant; The price is to be negotiated
DC motion sensor with 0~10V Dc output; 5.8GHz C-band microwave, tri-level dimming control; Input voltage: 12/24V DC Input curent: â?¥25mA; 0~10V DC putput signal; Super compact size, easy to be integrated; Dual-processor technology, real Lux-off & daylight monitoring function for built-in application; IR remote commissioning, easy setting and user friendly; Detection range up to 16~18m in diameter; Mounting height: max.12m; Operation temperatue: -20~+70degree; RoHS compliant; The price is to be negotiated
Supplier: Japanese quality switchgear components, breakers, magnetic contactors, switches, pilot lights, pushbuttons, panel instrumentations, power management meter, protection relays, transformers, inverters, ups.
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
5.8GHz C-band microwave, tri-level dimming function; Input voltage: 12/24V DC; Input current: â?¥25mA; 1~10V DC dimming output signal; Super compact, flexible to be integrated into any suitable fixtures; Dual-processor technology, real daylight minitoring function for built-in application; 8 pin DIP switch setting, multiple options to meet different customer demands; Detection range up to 12m in diameter; Operation temperature: -20~+70 degree; RoHS compliant The price is to be negotiated
5V/12V DC Input Microwave Motion Sensor - Standard Version DC Input Motion Sensor Module Adjustable Motion Sensor Module HNS101 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:�?�25mA. 5V DC high-low voltage output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Lux-Off function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20�?? ~ +70�??. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technolo gy, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~1 2m. Operation temperatur e: -2 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
