Industrial Aluminum Heat Sink

With the combination of liquid transport thermal dissipation module and vapor chamber technique, this aluminum vapor chamber heat sink is ideal for devices require more uniform heat spreading. With two ends liquid tube, each tube having a first end linked with the pipe is to connect with external heat-dissipating block which is disposed on the heat source to form a fluid loop. Kaixin aluminum is a professional heat sink provider offering one-stop comprehensive thermal solutions to customer worldwide. Model NO.: KX-0101 Material: Alu 6063-T5/6060-T6 as specification Machining Process: Drilling, sealing ring, Friction stir welding, Vacuum brazing Size: customized size Manufacturer label: OEM available

CuW75 Customized Tungsten Copper Alloy Heat Sinks WCu Spreader For LED Industry The CuW75 tungsten copper alloy is used extensively in thermal mounting plates, heat sinks, chip carriers, flanges, and frames for high-power electronic devices. As a tungsten copper material, it's a composite, so both the thermal advantages of copper and the very low expansion characteristics of tungsten can be utilized. The combination of tungsten & copper materials results in thermal expansion characteristics similar to those of silicone carbide, aluminum oxide, and beryllium oxide, used as chips and substrates. Because of tungsten copperâ??s thermal conductivity and expansion characteristics, Tungsten copper alloy works well in densely packed circuits. The thermal conductivity and thermal expansion characteristics of the semiconductor and the base plate must be optimally harmonized to avoid undesired distortions to the semiconductor. The better harmonized the properties are, the better the semiconductor module is to withstand soldering processes involved during manufacture and the temperature cycles that occur during operation. The sketch shows the principle structure of a hermetically sealed electronic package. Advantages of Copper Tungsten Heat Sinks / Spreaders: Strong hardness(86~93.5HRA) High arc resistance combined with good electrical conductivity High thermal conductivity Low thermal expansion. Applicatioins of Tungsten Copper Alloy: Our tungsten copper composites to be used extensively in thermal mounting plates, chip carriers, flanges, and frames for high-powered electronic devices. With the thermal advantages of copper with the very low expansion characteristics of tungsten, tungsten copper has properties similar to those of silicone carbide, aluminum oxide, and beryllium oxide. The thermal conductivity and low expansion also make tungsten copper alloy an excellent choice even for extremely dense circuits. The CuW75 tungsten copper alloy is used extensively in thermal mounting plates, chip carriers

LP900 is a silicon carbide ceramic heat sink and it belongs to the micro-hole structure. Under the same unit area,it can be more than 30% porosity, greatly increasing the heat transfer area with air to enhance its cooling effect. At the same time its heat capacity is small, its heat storage is small and the heat can be more quickly to the outside world. Ceramic heat sink main features: environmental protection, insulation resistance to high pressure, efficient heat, to avoid brewing EMI problems. So it can effectively solve the electronic and home appliance industry thermal and cooling problems, while it is specially for small and medium wattage power consumption, design space pay attention to light, thin, short, small products. Whats more, it can provide technical support and application for electronic products innovative and development. For more , please kindly feel free to contact

radiators, finned tubes , oil coolers, waste heat boilers

Any types and specification

1) Intelligent control: Micro processor based digital controller with LCD display. 2) Durable-more than 15 year's life time. 3) Adjustable water temperature setting: 25-85. 4) EVI Scroll compressor specially designed for high water temperature heat pump. 5) ECO-friendly refrigerant R134a. 6) High efficiency tube-in- shell water heat exchanger. 7) Easy installation and operation. Optional:  Direct heating / Circulation heating type Titanium Tube Heat Exchanger / stainless Steel Heat Exchanger R410a, R22, R407c refrigerant is available.

Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.

Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.

Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.