TFG3600
Combine with DDS and PLL techniques
1500MHz Maximum Frequency
1ppm High Accuracy, Less Distortion
Dual Independent Outputs
AM, FM, FSK, PSK Modulation
User can set accurate pulse width, burst signal as numbers
USB Device, RS-232
Function Generators
Combine with DDS and PLL techniques
1500MHz Maximum Frequency
1ppm High Accuracy, Less Distortion
Dual Independent Outputs
AM, FM, FSK, PSK Modulation
User can set accurate pulse width, burst signal as numbers
USB Device, RS-232
SPECIFICATIONS
CHA
TFG3605 TFG3615 TFG3610
Frequency
Range Sine 1μHz ~ 500MHz 1μHz ~ 1500MHz 1μHz ~ 1000MHz
Square 1μHz ~ 80MHz
Resolution 1μHz (carrier frequency�80MHz)
1Hz (carrier frequencyundefined80MHz)
Accuracy ±1ppm, Frequencyâ?¥1.0kHz
±50ppm, Frequencyï¼?1.0kHz
Sine Output Level
Range Freqâ?¤500MHz -127dBm ~ +13dBm(-127dBm ~ -117dBm typical)
Freqâ?¤1000MHz -110dBm ~ +13dBm(-100dBm ~ -110dBm typical)
Freqâ?¤1500MHz -105Bm ~ +10dBm(-100dBm ~ -105dBm typical)
Resolution 0.1dB
Accuracy Freqâ?¤300MHz setting ±1dBm (output level +13dBm~-105dBm)
Freqâ?¤1500MHz setting ±1.5dBm (output level +13dBm~-80dBm)
setting ±2.5dBm (output level -80dBm~-100dBm)
Stationary Wave Ratio (SWR) < 1.8
Sine Spectrum Purity
Harmonic
Arbitrary Waveform Generators TFG6900A With Direct Digital Synthesis technique (DDS)�large scale integrated circuits and soft-core embedded system (SOPC), TFG6900A series are of the excellent technical performances and powerful function characteristics which are necessary for the fast measurement. TFT-LCD interface can show the illustration of output waveform and parameters. Keypads and knob are convenient for operation. Arbitrary Waveform Generators Arbitrary Waveform Generators China Arbitrary Waveform Generators for sale FEATURES 4.3High resolution TFT LCD display Two independent channels output, same characteristic 1μHz frequency resolution for whole range 120 MSa/s sampling rate, 14 bits vertical resolution 5 standard waveforms, 50 built-in and 5 user-defined arbitrary waveforms FM, AM, PM, PWM, Sum, FSK, BPSK and SUM Modulation, sweep and burst function Channel coupling and combine features on CHB Build in 350MHz frequency counter Arbitrary Waveform Edit PC Software Standard interface: USB Host, USB Device and RS-232
Synthesized Signal Generators TFG3630 TFG3630 synthesized signal generators with PLL technique and use the FPGA to control screen display and output, with excellent technical performances and powerful function which are necessary for the experimental detection circuit and device detection. Large color LCD interface can show a variety of working parameters. Keypads and knob are convenient for operation. China Digital Multimeters China Frequency Characteristic Analyzer China Frequency Counter Features Frequency resolution: 3Hz Unlimited measurement range: digital setting directly for the whole range. Non-intergraded process: up to the stable value immediately when switching, continuous signal phase and amplitude without deflection. Sweep characteristics: with the function of frequency sweep and power sweep. Start point and stop point can be set arbitrarily. Modulation characteristics: pulse modulation signal with user-defined can be output. Operation mode: key operation, TFT-LCD interface, direct digital setting, continuous adjustment by knob. High reliability: large scale integrated circuit, SMT, high reliability and long service life. Communication port: USB device , RS232 and GPIB (optional) Specifications Frequency Range 25MHz~3GHz Resolution 3Hz Accuracy ±5ppm Stability 1Ã?10-7 Reference Frequency Reference Output: Frequency: 10MHz Level: >0dBm Port: BNC connector Reference Input: Frequency: 10MHz Power: -3~+7dBm Input Port: BNC connector Impedance(nominal): 50Ω Phase Noise -90dBc~-115dBc Offset20 kHz Spurious Harmonic:
SU5000 Suin supplies the electronic test and measurement instruments, which include signal generator, power analyzer, spectrum analyzer, power supply, function generator, digital multimeters and other instruments Pulse/Pattern Generators SU5101/5102 SU5202G SU5302 SU5303 Channel 1/2 2 2 1 Waveform Pulse Single/Dobule, Logic Positive /Negative, Positive/Negative Polary Single/Dobule, Logic Positive /Negative Logic Positive /Negative Edge Time â?¤10ns â?¤10ns 8ns ~ 1ms 8ns ~ 1ms Overshoot â?¤ 10% â?¤ 10% â?¤ 10% â?¤ 5% Time Pulse Period 20ns ~ 10000s (frequency range: 0.1mHz ~ 50MHz) Time Interval 5ns ~ 9999.5s 8ns ~ 9999.5s Resolution 5ns (Low range), 10μ;s (High range) 4 digitsï¼?best case 0.1ns Interval Error ± (TÃ?5Ã?10-5 + 5ns)(Low range), ±(TÃ?5Ã?10-5 + 10μ;s) (High range) ±(TÃ?5Ã?10-5+5ns) Pattern Function N/A Length:4095bits Length:16384bits Format:NRZ Format:NRZ, RZ Rate:100mHz ~ 50MHz Rate:2mHz ~ 50MHz Resolution: 0.1Hz Amplitude Offset Amplitude Range 50mV ~ 10V(High Z) 50mV ~ 5V (50Ω) 50mV ~ 5V (50Ω) 50mV ~ 5V (50Ω) Offset Range 50mV ~ 10V(High Z) 50mV ~ 5V (50Ω) 50mV ~ 5V (50Ω) -5V~ 5V (50Ω) Output Impedance 50Ω TTL TTL/COMS Level Low Levelâ?¤ 0.3V, High Levelâ?¥3.0V (high impedance load) Output Impedance 50Ω Burst Burst Count 2 ~ 65000 cycles Burst Mode Continuous, Signle EXT. STD Input Frequency 10M mutiple Amplitude â?¥0.5Vrms Trigger Trigger Mode Internal, External, Manual Ext. Trigger Input Frequency: 1Hz ~ 10MHz (Square), Amplitude: 1Vpp ~ 20 Vpp Input Impedance â?¥100kΩ General Characteristics Power AC220V(1±10%), 50Hz(1±5%),â?¥50VA Display VFD 5.7' TFT LCD 5.7' TFT LCD 4.3' TFT LCD Optional Interface USB, GPIB RS232(Standard),GPIB RS-232(Standard) RS232(Standard),GPIB Dimension & Weight 254Ã?103Ã?384mm, Approx.3 kg 330Ã?155Ã?300mm,Approx.4.2kg 450Ã?100Ã?475mm, Approx.6.0 kg
Supplier: "signal Generator, RF Signal Generator, Function Generator, Arbitrary Waveform Generator, Pulse/pattern Generator, Spectrum Analyzer, Power Supply, Power Analyzer, Digital Multimeter, Frequency Counter, Frequency Characteristic Analyzer, Logic Analyzer, Millivolt Meter, Distortion Meter, Noise Source, Frequency Standard Comparator
Supplier: Power supply, variable power supply, bench power supply, laboratory power supply, DC power supply, ac power supply, electronic load, LCR meters, power meters, function generator
NO: KT-9015 Sort: KT-Product Series Name: Multifunctional hand-shaking electricity Generation flashlight Functions: LED flashlight* lamp * FM scan radio* clock /date/week display*chime time*alarm*siren* hand-shaking Generate electricity *mobile telephone electricize *the Handle of rubber oil surface feels good! Your life helperUnit Unit side: 48*200MM Battery: 1 pcs AG13, 3 pcs AAA Packing: Gift box 50PCS/ctn Ctn side: 59.5*30.23CM W. N: 13.5KGS N. W: 12.5KGS MOQ: 5K Delivery time: 40days Unit price: usd5.1( EXW, WITHOUT LOGO, WITHOUT TAX) Payment: Prepay30%, then pay off the balance before delivery Packing: Gift box 50PCS/ctn Ctn side: 59.5*30.23CM W. N: 13.5KGS N. W: 12.5KGS
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger