SUMMARY
SNV308.1 series overhead type Fault Indicator system is based on the Sensor that through CT get the (6KV-50KV) lineâ??s current signal, through smart computer chip(IC) by program calculating, Analysis ,judge the short circuit or ground fault. When Sensor detect the fault happen, then the Fault indicator warn the manager through turn red flag, and shine 3 color ultra-led. It is good for power managing user to find the fault happen reason and place, then fast solve the problem and make the power restore.
*SNV308.1 Fault Indicator with the aid of the remote control PDA(SNV306.1), User can read, reset the indicatorâ??s setting parameter, and can read the online real time current etc
*SNV308.1 Fault Indicator with the aid of the professional control terminal equipment(SNV309.1) and Web server, it can achieve to remote read and manage the Fault indicator state on times.
There are two channels for reading and managing the remote fault indicators. One is through GSM mobile phone SMS command control. Second is user computer software control. Power managing user, can get the fault indicator information on times
Supplier: Mv indoor and outdoor switchgear , fault indicator, short circuit and earth fault indicator, overhead line ground fault indicator, overhead line remote earth fault indicator, smart cabinet dehumidifier
Accessories: Ø transmitter charger adapter – 1 no. Ø two core dcdb positive and negative connecting cable - 1 set Ø transmitter earthing cable – 1 no. Ø sensor probe small (15 sq mm) – 1 no. Ø sensor probe big (50 sq mm) – 1 no. Ø two core connecting cable to connect receiver to sensor probe - 1 set Ø receiver unit charger – 1 no. Ø instruction manual – 1 no. Other models: Ø digitrace dc 663m - dedicated kit connected to dcdb permanently Ø digitrace dc 631px- fault location upto 100kΩ Packaging as per international standards
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Display Ø outputs : printout in 4 formats, graphic lcd display & complete analysis data to laptop loaded With tadma software Ø type of signal transmission : pulse Ø control : automatic mode and manual mode Packaging as per international standards.
short circuit&earth fault indicator widely used in ABB/SIEMENS switchgears: 1. Short circuit alarming current: 100A to 1000A time delay 40ms 2. Earthing alarming current: 10A, 20A,30A,40A,60A±10% time delay 40ms 3. Temperature range : -25 to +70 4. Humidty range: â?¦95% 5. Earth lead length : 4m optional 6. Conduct optical fiber length 3.5m optional 7. Power supply: lithium battery 3.6V/2.45Ah 8. Auto-reset time : 7s,2hrs,4hrs,8hrs 9. Output relay : 125 V AC 1A, 30V DC 2A 10.Main controller dimension : 95*50*80mm 11.Cutting hole size : 91*44 mm 12.Protection class : Main Controller :IP40, Sensor:IP65
Features: small volume and convenient installation, probe fault indicator, 220v power supply. Power consumption: less than 3w Measurement range:-30~+110¡ã c Accuracy: 1% Display eee ntc sensor failure (short circuit or open circuit) Power supply: 220v Dimension: 64(l) x31(w) Mounting hole dimension: 58.4(l) x 25.7(w) mm Display eee ntc sensor failure (short circuit or open circuit) Power supply: 220v Dimension: 64(l) x31(w) Mounting hole dimension: 58.4(l) x 25.7(w) mm
Technical characteristics: Safe load indicator JL-3000 uses industrial grade 5.7 inch LCD screen; Full patch design, waterproof, dust-proof, anti-vibration, small size and easy to disassemble; The casing is made of high-pressure cast aluminum material, beautiful, and the protection level is strong; Large-scale digital, analog CMOS integrated circuits, low power consumption; strong anti-interference ability, high reliability; The system has automatic fault detection function, which can automatically determine the fault location; The host adopts the touch button, long service life and high reliability; The system uses the latest modular integrated chip. Software can adjust the gain, the hardware without potentiometer, to solve the drift problem caused by the temperature change of the potentiometer, thus ensuring the stability of the dataï¼? With password setting to prevent parameter wrong settingï¼? With sound and light alarm functionï¼? Automatic compensation for sensors, 'temperature drift' and 'null drift'ï¼? With black box function, convenient to inquire any time.
1.Temperature controller adopts japans and italian (p.I.D) programmed sensor Internal storage, which calculates automatically. Its precision is controlled within +1¡æ and it can save above 35% power. 2. Two sets of tubular electric heating element can use one or both. 3. Short heating of cooling time and stable temperature. 4. Electric heating can is made of stainless steel. 5. Perfect security protection and fault indication system 6.Use the advanced unit from foreign countries with long life. 7. Cad system design that is easier to handle and maintain. Long;1100 Wide;600 High;600 Weight;110kg Packing; standard wooden case
1.Temperature controller adopts Japans and Italian (P.I.D) programmed sensor internal storage, which calculates automatically. Its precision is controlled within +1¡æ and it can save above 35% power. 2. Two sets of tubular electric heating element can use one or both. 3. Short heating of cooling time and stable temperature. 4. Electric heating can is made of stainless steel. 5. Perfect security protection and fault indication system 6.Use the advanced unit from foreign countries with long life. 7. CAD system design that is easier to handle and maintain. LONG;1100 WIDE;600 HIGH;600 WEIGHT;110KG PACKING; STANDARD WOODEN CASE