Graphite Packing Rope

Pure Flexible Graphite Packing is made from expanded graphite yarn braided into through all kinds of technology of braiding . They are almost suitable to all media, such as hot water, steam, acids, alkalis, organic solvents,hydrocarbons, low temperature liquids, etc. The sealing cap ability is more better and safety,it is the most effctive composite parts forsolving problems, Pure Flexible Graphite Packing is very popular. 1.Flexible Graphite Packing can be used in valve and some rotary application, high temperature valve and soot blowers. 2.Flexble Graphite Packing is suitable for all application, seals hot water, high temperature and pressure steam, heat transfer fluid , hydrogen gas, ammonia, Solvents. Hydrocarbons, Cryogenic liquids, etc.

Variety: all kinds of graphite packing, graphite packing ring, spiral wound gasket, graphite thread Specifications: Adjust according to customer requirements Performance: Use temperature: -200~800In non-oxidizing medium Product Usage Various pumps,valves,chemical instruments,metallurgy,electric power,etc. ,used as static sealing components

PTFE Graphite Packing The packing is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder plus moderate amount of heat-resistant lubricant. PTFE Graphite Packing with oil Packing: Packing made of 100% g PTFE yarns, and re-impregnated with a silicone lubricant with density about 1.6g/cm3. Applications For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators. Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings. Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents. It is also against water, steam, petroleum derivatives, vegetable oil and solvents.

Description: Graphite filled PTFE fiber with excellent thermal conductivity and chemical resistance. An economical substitute for GFO. Equipment: Valves, agitators, mixers, driers, refiners, rotating & reciprocating equipment, expansion joints Applications: Corrosives, chemicals, solvents, water, steam, gases, air, ammonia, oils, liquor, paper stock, condensate. Marine shaft packing. Industries: Agriculture, Chemical & Pharmaceutical, General industry, Marine, Municipal/Wastewater, Oil & Gas, Power generation, Pulp & Paper, Steel & Metals Service Limits: Temperature: To 550°F / 285°C Pressure: 300 PSI / 20 Bar Speed:4300FPM pH Range: 0 - 14

It is a braided packing made of PTFE yarn containing graphite particles and anti-corrosive lubricant. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self-lubricating packing does not score the shaft and minimizes sleeve replacement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids(aqua regia, fuming nitric acid, fuming sulfuric acid, etc.) forcentrifugal pumps, autoclaves agitators, mixers, etc. Spec: 3.0mm - 50mm

This is a packing made by asbestos yarns, treated with lubricant and graphite. Used in pump, valve, etc. the working medium are steam ,air industrial water,peturm oil.The packing with METALLIC (copper wire, inconel wire or stainless wire) are also available. Spec:3.0mm - 50mm

It is flexible braided packing which is made of an innovative expanded pure graphite yarn. It can be used to seal hot water, high temperature and pressure steam, leat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic liquids, etc., except fewer strong oxidizer .They can be applied to the equipments and devices in peroleum,electricity generation ,chemical ,pharmaceutical and light industries. Spec:3mm - 50mm

- Graphite Tape Packing is the packing that compressed and molded in a certain dimension for easy installation. - The graphite's self-lubrication capability and low coefficient of friction allow to use in a wide range without giving damage on the reciprocating and rotary shaft. - If you want to disassemble only gland without disassembling pump and valve, you can just cut it and deliver. - You can get better sealing effects if you use with ALS910C, ALS900G and ALS955W depending on the use purpose.

material: graphite Application: insulation seal Spec. 3-50 mm Temperature Heat:-200-1650C