Product Introduction
The mold transport trolley is designed for mold handling. The mold transport trolley is powered by mobile cable. Depending on the size of the mold, you can choose the size and load capacity of the mold transport trolley.
Working Principle
When the mold transport trolley moves, the cable pulls behind the mold transport trolley. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport trolley, and then provide the power to the engine.
The mold transport trolley conduct AC 380V directly into the electrical control system of the mold transport trolley to let it start, stop, go forward and backward and so on.
Operation Method
The mold transport trolley can be equipped with two kinds of operating handles and remote control. The length of the handle is generally 3meter or 5m, there are four keys and a joystick, the four keys are: start, emergency stop, forward and backward, the joystick controls the steering of the mold transport trolley.
Move the joystick to the left, the mold transport trolley to the left, move the rocker to the right, and the mold transport trolley to the right (the direction of the motor is the direction of going forward). If make the cart stop, release the forward or back button or press the stop button. If want to start again, turn emergency stop clockwise, press start. The remote control is a six-button control, including start, stop, go forward, backward, left and right turn. When turning left or right, you must press the corresponding direction key at the same time. When you start again, press the start button directly. Now, what's more, the operating handle and the remote control cannot control the mold transport trolley at the same time (the control box has a switcher with operating handle and remote switch). There are a handle-placed box in the trolley for convenient placement.
· Surface treatment: plastic spray, better than paint, will not be damaged easily. · Improved structure:installation of balls , which makes the crushing wheels to turn more flexible and convenient. · Material of wheels:PU, nylon or steel, which is more wearable, durable and do little harm to the work place. · Reasonable structure: low center of gravity, large carry capacity, easy and safe operation.
Which mainly use to transport idle cattle carcass hooks for recycling, the detail data as following: 1)-Capacity: 120 hooks per trolley 2)-Out size: 1800X700X1350mm (LXWXH) 3)-Material: Hot galvanized steel
Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1, 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6, 7.5 Power (KW) : 12KWx1, 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7, 6 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions.
Product Introduction The mold transport cart is designed for die or mold handling. The mold transport cart is powered by dragged cable. The capacity load of the mold transport cart can reach 500 tons. Depending on the size of the die or mold, you can choose the size and load capacity of the mold transport cart. Working Principle When the mold transport cart moves, the cable pulls behind the mold transport cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport cart, and then provide the power to the engine. The mold transport cart conduct AC 380V directly into the electrical control system of the mold transport cart to let it start, stop, go forward and backward and so on. Performance Characters 1. As a common tool for short-distance transit across the factory, the mold transport cart has a simple structure, low production cost. 2. This series mold transport carts are suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition. Compared with KPX series cart, the using time is not limited. 3. Compared with KPD series cart, it has no strict requirement on the rail's installation. Compared with KPJ series cart, the cost is lower. 4. Mesa size, the gauge can be customized. Various non-standard mold transport cart can also be obtained. 5. Choose import wireless remote control, control the distance of 100 meters.
TATA series trolleys designed for the transport of dangerous waste containers are manufactured by stacking waste containers on top of each other and making appropriate bearings for the safe transport of waste containers. It can be easily driven with a total of four moving wheels, including two brakes at the rear.
TATA series trolleys designed for the transport of dangerous waste containers are manufactured by stacking waste containers on top of each other and making appropriate bearings for the safe transport of waste containers. It can be easily driven with a total of four moving wheels, including two brakes at the rear.
TATA series trolleys designed for the transport of dangerous waste containers are manufactured by stacking waste containers on top of each other and making appropriate bearings for the safe transport of waste containers. It can be easily driven with a total of four moving wheels, including two brakes at the rear.
Place of Origin Hubei, China Type Railway maintenance equipment Material Aluminum alloy Dimensions (L x W x H) (mm) 930*800*350mm Brand Name Linkage Type Railway tool Usage railway transport goods Product name Foldable Rail Push Trolley Application railway maintenance Suitable Track gauge 1435mm Load capacity 1 ton Plate 1700*700mm Certificate CE Warranty 1YEAR Customized Yes Packaging and delivery Packaging Details Pe bag+paper carton, 1 unit/Carton box, Carton box: 60*90*45 cm, G.W: 70KG Port Shanghai Supply Ability Supply Ability 500 Unit/Units per Month
Supplier: Sectional warping machine, direct warping machine, cone creel, sizing machine, beam lifting, cloth roll transport trolley
