Product Introduction for ladle transfer car
1.Because of the molten steel temperature is high, the ladle transfer car body is equipped with high temperature heat insulation material to ensure the safety of vehicle electrical components.
2. With double drive system, when one transmission system fails, another set of will start immediately. In order to prevent inertia effect makes the molten steel spatter during transportation, the ladle transfer car motor is designed with slow start and stop function, which can effectively prevent the molten steel waste and protect the safety of personnel.
3. The ladle transfer car platform can designed according to the diameter of the ladle , and it can increase hydraulic lifting device, weighing device according to the requirements.
4.In order to keep the sufficient security distance between ladle transfer car and workers, we recommend using wireless remote control.
Product Introduction for ladle transfer car 1.Because of the molten steel temperature is high, the ladle transfer car body is equipped with high temperature heat insulation material to ensure the safety of vehicle electrical components. 2. With double drive system, when one transmission system fails, another set of will start immediately. In order to prevent inertia effect makes the molten steel spatter during transportation, the ladle transfer car motor is designed with slow start and stop function, which can effectively prevent the molten steel waste and protect the safety of personnel. 3. The ladle transfer car platform can designed according to the diameter of the ladle , and it can increase hydraulic lifting device, weighing device according to the requirements. 4.In order to keep the sufficient security distance between ladle transfer car and workers, we recommend using wireless remote control. Features for ladle transfer car Heavy load; High temperature resistance; Safety and efficiencyï¼? Low noise
Brief Introduction This kind of rail operted ladle transfer car is running on steel rail. The power supply of the rail operated ladle transfer car is low voltage railways, it can also be choosed as per demands, like battery power, cable drum power, sliding wire power, mobile cable power and so on. The rail operated ladle transfer car has been new favorite in the industry transport field all over the world with hot market. Especially for the workshop transportation. Working Principle The power source AC 380v is transformed into AC 36v two-phase and are respectively connected to the two rails. Then the rail operated ladle transfer car conduct the AC 36v on rail into the electrical appliance box at the bottom of the rail operated ladle transfer cars. And then the AC 36v is transformed into DC 36v and then control the DC motor through the DC control system to make the rail operated ladle transfer cars start, stop, go forward and backward and adjust the speed and so on.
KPT Series transfer cart are powered by mobile cable.One end of the cable connect with ground power supply.The power brought in control chest through traction wire, then supplys power to YZ lifting motor to run. The running distance is not too long, not beyond 50m. I f the distance is too long, it is easy to wind the cable. Technical parameters: Type : KPC-16T Rated load(t) : 16 Table size(mm) : 4000' 2200'600 Speed(m/min) : 30 Wheel tread(mm) : 2200 Wheel diameter(mm) : 400 Bottom-clearance(mm) : 50 Min. turning radius : 35 Rail guage(mm) : 1435 Motor power(kw) : 3.7 Rail code : P24 Wheel quatity : 4 Structure : Box and girder Max. wheel load(t) : 4.87 Material : Steel. According to customers' demands.
Supplier: Rail transfer cart , mold transfer trolly, trackless transfer cart, coil handling cart , steel coil transfer car, railway inspection vehilce, heavy duty agv, industrial turntable transfer car, non power industry trailer, , ferry transfer cart, material handling equipment , die mold cart, factory use handling cart, cable drum powerd transfer cart, battery operated transfer car, truck tractor, ladle transfer car, hydraulic lifting transfer car, automatic guided vehicle
Services: Shipping
Buyer: Steel, batteries
The rail transfer cart is power by busbar(electric sliding line). It gets power from sliding during the cart running. The electric control system of the cart realize it start, stop, go forward and backward. Features of rail transfer cart: Simple structure, low cost; Has no strict on rail construction; Suitable to working area with short running distance; Suitable to working area with high using frequency; Has no limit on running distance; Can be applied in high-temperature environment; Box girder structure; Reasonable design, reliable operation. Can be add hydraulic lifting device; Can be add dumping device; High efficiency, low energy consumption, The whole rail transfer cart is packed by high quality plastic cloth
Supplier: Rail transfer cart, trackless transfer car, ladle transfer car, coil transfer cart
The turntable is designed to transport vehicles across the track and can be rotated 60 degrees, 90 degrees and 120 degrees in factories to achieve rapid adjustment of railway vehicles. The working principle is that: the guide rail is also mounted on the turntable, When the rail transport vehicle is running on the turntable, the turntable can be rotated automatically or manually until it is accurately attached to the target rail and then the transport vehicle is running on the vertical rail. The turntable is suitable for a variety of applications, such as round rails, vertical rails, cross rails, and more. The turntable system runs smoothly and has high rail connection accuracy, the PLC can be installed to meet fully automated electrical operation.
The cross-rail ferry transporter consists of two parts. The upper car usually powered by battery, Used to transport goods, and the upper car can be equipped with a V-shaped bracket, a lifting platform etc . The under car is can be powered by batteryã??cable drumã??rail power, Designed to run underground, with rails on the deck for connecting to other rails in the workshop, so the upper deck can travel on multiple different parallel tracks. The crossing rails ferry transporter enables fast and precision transitions between parallel tracks, and one transfer vehicle can accommodate parallel transitions of multiple vehicles. The two cars have independent control systems, both wired and wireless remote control can also be installed with PLC. It is more convenient and economical than the turntable platform.
Products Introduction The electrical trackless transfer car, literally speak, it is an electric transfer car designed for material handling. the electrical trackless transfer car is running on the ground floor directly, which is the special type compared with traditional transfer car. The electrical trackless transfer car has been new favorite in the industry transport field all over the world with hot market. Especially for the workshop that it exists unfixed running distance. Product Details Usage: Industrial, Workshop, Warehouse, Port Wheel Type: Polyurethane Solid Wheels Color: Customized Running Speed: 0-40 m/min (Adjustable) Load Capacity: 25 Ton (Can Be Customized As Per Demands) Wheel Amount: 4 Application: Transfer Materials Transport Package: The electrical Trackless Transfer Car Is Packed By Tarp and The Parts Are Put Into The Wooden Case. Features a. This kinds of electrical trackless transfer car needn't run via the rails, which gets rid of relying for the rails. b. It can not lead to impairment for the cement ground, and can run freely, go forward, back forward, turning... c. This kinds of electrical trackless transfer car is battery powered, so only charged fully, can it run freely without limited distance. d. Pofessional team for Xinxiang New Leader Machinery Manufacturing Co., Ltd, the proper solution can be provided once getting for your inquiry.
