Applications:
Briquette Press YE83-250 is applied in steel mills, foundries, recycling plants, ferrous & non ferrous smelting industry to press scrap metal chips (max. length 40mm) into high density briquettes (cylinders). Briquette Press YE83-250 is good for briquetting of cast iron powder, crushed steel turnings, aluminum swarf, copper milling chips, all sorts of metal sawdust, particles, chips & fins, and metal cans shreded to small pieces (smaller than 40mm). Briquette Press YE83-250 is NOT SUITABLE for: wood sawdust, coir fibre, biomass material.
Features:
1. Vertical briquette press, briquette density is high.
2. Robust machine of solid structure, special alloy for press mould liners.
3. Hydraulic oil cooler: standard water cooler (need cooling tower to supply cool water); optional normal air cooler,
or compulsory air cooler (air cooler with compressor).
4. Magnetic return oil filter. NOK (Japan) seals for cylinders.
5. Hydraulic drive, Mitsubishi PLC operation.
6. Feeding conveyor & vibrating motor are optional for charging of material.
YE83-250 Main Parameters:
Main cylinder force: 200 MT
Auxiliary cylinder force: 55 MT
Press mould size: dia110Ã?H300 / dia120Ã?H300 MM
Briquette size: dia110Ã?H(70-100) / dia120Ã?H(70-100) MM
Briquette weight: 3.6-5.2 / 4.1-5.9 kg (cast iron)
Production rate: 1000-1100 kg/hr (cast iron)
Electric motor: 22 kW
Cold press,Hot press to make industrial cardboard
Technical Specifications : Exterior size: 5800(Double plate 8800) mm, 1500 mm, 1400mm Working plate inner size: 2550mm, 1150 1300 mm (if producing the door, you choose 1150mm;if producing cabinet, you choose 1300mm) Maximum height of the work piece:50mmincluding height of Magnetic block or bottom plate Rating working pressure: -0.095Mpa General Power: 15kw Actual power consumption: about 5kw Weight: 2.5T Top temperature:180. EPE film+preservative film 3.2X1.8X2M 2500KG.
Technical Specifications : Exterior size :10030mm, 2230 mm, 2150mm Working plate size:2580mm, 1270mm inner size Suitable for cabinet, the width of PVC film should be 1400mm Maximum height of the work piece :50mm including bottom plate Rating working pressure: Positive pressure 0.6Mpa Negative pressure : -0.095Mpa General Power: 65kw Actual power consumption : About 15kw Weight :12.6T Top temperature:150 EPE film+preservative film, 3.25x2.25x2.05m+2.3x1.25x1.8m 12000kg.
MADE OF TROPICAL HARD AND SOFTWOOD AND PRESSED TO FORM BALE/BLOCK IS INTENDED TO BE USED AS ANIMAL BEDDING AND NO CHEMICAL ADDED
GAMA Cricket Bat Pressing Machine compresses the willow which will reduce the bruising of the blade of bat during practice or match play. Strong cast iron construction. Cast alloy side table. Powerful 370w (2 hp) motor. No-Volt on/off safety switch. Dimensions: 140 X 58.5 X 104 cm. Weight: 150 kg. The main aim of pressing has always been to compress the fibres for strength and also for rebound. As pressing is a delicate balance between hardening the willow for strength and leaving the blade soft enough to play well. Generally, The blade is pressed to between 1500 lbs and 2000 lbs per square inch with one to three passes. We believe that this is the most fundamental part of bat making and is often be the difference between a good bat and a great bat.
SIEMENS PLC system : five different pressure controls, six modes data for high quality plywood. Pressure, cylinders, plate size and so on can be custom made to meet your different requirements.
SIEMENS PLC system : five different pressure controls, six modes data for high quality plywood. Pressure, cylinders, plate size and so on can be custom made to meet your different requirements.
Place of Origin:Shandong, China (Mainland) Model Number:plywood hot press Power(W):37KW Weight:7600KG, 7600kg Warranty:2 Years Platen size:2500*1300*42mm Panel width:â?¥ 60 mm Hot Oil Pump Power:wer:1.5kw Pressure:100T Dimension(L*W*H):3600*1700*2000mm Certification:CE ISO Total pressure:1000KN/100T Cylinder No.& diameter: 6 - 100mm Hydraulic Motor Power:5.5kw Thermal oil furnace motor power:36kw Brand:WFSEN
Feature of straw briquette molding machine : This sawdust briquette machine with automatic temperature control system is designed to produce high density wood briquette stick from biomass. Improved the structure of molding tube, reduced the friction between the mechanical and the raw materials, final increase the density of briquettes . The newest type wood briquette machine are more stable and durable for working. Suitable raw material: Ground nut shell , sugarcane residue, caster shells/stalk saw dust , coffee husk, paddy straw , sunflower stalk, cotton stalks , tobacco waste, mustard stalk, jute waste, bamboo dust , tea waste, wheat straw , palm husk , soybeans husk, rice husks , forestry wastes, wood chips and many other agro wastes. 1. Feeding size of raw material should better be 3-5mm. 2. Moisture better be 8%-12%.
