Fast and accurate dosing of low to high viscosity media.
Needle metering valves are used for the processing of low to high viscosity media. The valve consists of two separate parts. This means that it is not possible for any leaking material to enter the actuating air cylinder, which could cause a malfunction. The needle is sealed by means of an adjustable packing set (Metering volume: 0.001 - 3.0 cm3).
Product Link:
Forged Steel Needle Valve BSEN ISO 15761 Pressure Rating : Class-800 Material : Forged Steel (A105) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem Ends : Socket Weld, Butt Weld, Screwed Operator : Hand wheel, Electric Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, IBR Item Code : FCS00019 Size : 15mm Notes : Available Valve Size : CLASS-800 8mm to 50 mm CLASS-1500 15mm to 40 mm CLASS-25000 15mm to 25 mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321
Supplier: Mass flow controller, rotamater, needle valve, voltex flow meter
òNumerous Variants A room for customization at a reasonable cost is the description that sums up the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. The MODEL 3660 SERIES has gained wide acceptance and solid reputation for its flexibility. It is in use throughout laboratories, universities and foundries, in both its original and customized variants. ò Low-Cost If the cost effectiveness is the decisive factor in choosing the right mass flow controller for you application, few can compete with the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. Its extensive menu of standardized optional features is yet another advantage in cost considerations. ò KOFLOC Dependability KOFLOC has 60 years of experience in manufacturing precision flow instruments. KOFLOC products, both standard and off-catalog custom items are well received throughout Japan as the name that manifests confidence. KOFLOC, the fluid expert, is the name professionals trust in precision control of minute flow. ò Low Pressure Option The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES has a standard low-pressure differential option especially suited for applications of burn control. ò Solenoid Valve The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES utilizes the unidirectional normally closed valve with solenoid actuator to achieve higher dependability and safety. ò Standardized Dimensions and Parts The KOFLOC Mass Flow Controller, MODEL 3660 SERIES retains the standard 3 in (76 mm) footprint, regular fittings and SEMI standard serial connector to easily replace and fit into existing gas lines without any modifications for use in widest possible applications. òQuick Response The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is equipped with the new improved constant current thermal differential sensor for quick response of 0 ~ 100% in 2 s or less. ò Versatility The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is in use as a component for Sputter deposition, bond wiring, welding and washing equipment for semiconductor and electronic industries. It is used in scientific and analytic purpose such as in thermal analysis and vacuum equipment. The MODEL 3660 is also capable of meeting unique needs as the mass flow controller in industrial applications, including gas mixing, air sampling, burn control and more.
Safety IV Cannula Product Code: MED 159 Specifications: Sterile, individually packed in peelable blister pack Size/Strength: 14 G, 16 G, 17 G, 18 G, (45 mm), 20 FG(32 mm), 22 FG (25mm), 24FG, 26G (19mm) Description Passive, irreversible activation of safety mechanism Needle sharp tip is enclosed inside a plastic cage after pulling out. The Plastic cage is designed as such that once needle sharp is fully enclosed inside it cannot come out of the cage hence prevent the healthcare professionals from the risk of accident due to needle stick injury of injection. Injection port with one way silicone injection valve
I.V. Cannula with Injection Port Product Code: MED 158 Specifications: Sterile, individually packed in peelable blister pack Size/Strength: 14 G, 16 G, 17 G, 18 G, (45 mm), 20 FG(32 mm), 22 FG (25mm), 24FG, 26G (19mm) Description PTFE Cannula has smooth surface for non-traumatic intubation. Formulated Cannula tip to facilitate less traumatic penetration. Super sharp Needle with two cutting edges. Provided with Injection port with non-return valve for extra Medication.
Product Description - 1/8" To 2" (BSP / NPT / Metrics) 1000 PSI to 20000PSI All Types Of Alloy Steel Grade -20 C to 350 C PRESSURE:- 1000 PSI to 20000PSI Product origin - MUMBAI Key Specifications/Special Features - Female x Female Connection, Female x Male Connection Male x Male Connection,OD Tube Connection (Metric) Minimum Order Size and Packaging details - 26 PIECE
Needle valves are usually used in flow-metering applications, especially when a constant, calibrated, low flow rate must be maintained for some time, such as the idle fuel flow in a carburetor. Needle valves sometimes referred to as plunger valves. A needle valve has a relatively small orifice with a long, tapered seat, and a needle-shaped plunger on the end of a screw, which exactly fits the seat. These needle valves are an ideal option for isolating or throttling applications. The self centering, non rotating stem ensures perfect seating. The rigid design gives repetitive bubble tight shut off, easy.s. Our range of needle valves has been designed with durability and performance in the spotlight. These needle valves are available in a variety of sizes (1/4, ½, 1/8 inch). Our range of needle valves has been designed with durability and performance in the spotlight. These needle valves are available in a variety of sizes (1/4, ½, 1/8 inch).
òNumerous Variants A room for customization at a reasonable cost is the description that sums up the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. The MODEL 3660 SERIES has gained wide acceptance and solid reputation for its flexibility. It is in use throughout laboratories, universities and foundries, in both its original and customized variants. ò Low-Cost If the cost effectiveness is the decisive factor in choosing the right mass flow controller for you application, few can compete with the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. Its extensive menu of standardized optional features is yet another advantage in cost considerations. ò KOFLOC Dependability KOFLOC has 60 years of experience in manufacturing precision flow instruments. KOFLOC products, both standard and off-catalog custom items are well received throughout Japan as the name that manifests confidence. KOFLOC, the fluid expert, is the name professionals trust in precision control of minute flow. ò Low Pressure Option The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES has a standard low-pressure differential option especially suited for applications of burn control. ò Solenoid Valve The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES utilizes the unidirectional normally closed valve with solenoid actuator to achieve higher dependability and safety. ò Standardized Dimensions and Parts The KOFLOC Mass Flow Controller, MODEL 3660 SERIES retains the standard 3 in (76 mm) footprint, regular fittings and SEMI standard serial connector to easily replace and fit into existing gas lines without any modifications for use in widest possible applications. òQuick Response The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is equipped with the new improved constant current thermal differential sensor for quick response of 0 ~ 100% in 2 s or less. ò Versatility The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is in use as a component for Sputter deposition, bond wiring, welding and washing equipment for semiconductor and electronic industries. It is used in scientific and analytic purpose such as in thermal analysis and vacuum equipment. The MODEL 3660 is also capable of meeting unique needs as the mass flow controller in industrial applications, including gas mixing, air sampling, burn control and more.
Hitesh Metal is expertise trader & supplier for high quality Steel Needle Valves , which is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Fatigue resistance is lower than that in butt - welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods. Stainless Steel Needle Valves offered by Hitesh Metal are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted. Valves are used only in conjunction with ASME Pipe and are available in the same size range. Carbon Steel Needle Valves are used in areas where pipe - work is permanent and are designed to provide good flow characteristics. They are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Alloy Steel Needle Valves offered by Hitesh Metal is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations. To join pipe to Valves and fittings or to other sections of pipe, fillet - type seal welds be used. Duplex Steel Needle Valves are produced to several ASTM standards and are manufactured in accordance with ASME B16.11. Hitesh Metal also offer these Nickel Alloy Needle Valves in different sizes, shapes and designs as per customers specifications at affordable rates. ANSI/ASME B16.10 Needle Valves Specifiactions: Materials CS, SS, Monel, Hastalloy, Duplex and High Nickel alloys Seat Metal or Soft. Connections Thread, Weld or Tube End Design Forged Body with Inline/Straight or Angle Pattern, Integral Bonnet Design Size 1/8 to 1, Custom Sizes available on request End Connection Male and Female NPT, BSPT, Socket Weld (SW) or Dual Ferrule Tube Connections, Male to Female, Female to Female Working Pressure Up to 6000 PSIG, Needle Valves are also available that can handle higher pressure Stainless Steel Needle Valves: up to 6000 psig (414 bar) Steel Needle Valves: up to 3000psig (207 bar) Brass Needle Valves: up to 3000 psig (207 bar) Temperature Rating PTFE 450F,(232C)/ Grafoil 700 F(371C) PTFE Packing: -65 F to 450 F ( -54 C to 232 C) PEEK Packing: -65 F to 600 F ( -54 C to 315 C)
