Cast Iron Surface Plate

Cast iron inspection surface plate with T-slot: Material: HT200-300 Standard: GB/T22095-2008 Specification: 100x200-3000x8000mm or customize Surface: flat (accessories are available according to your requirement, like V, T, straight-shaped slots and tapped holes, long holes, grid lines, etc) Hardness of the working surface: HB160-240 Surface treatment: hand-scraped, finish-milling or ground finish Foundry process: sand casting or centrifugal casting Molding type: resin sand molding Painting: primer and face paint Surface coating: pickling oil and plastic-lined or covered with anticorrosion paint Surface flatness: Master, Working, Reference Precision grade: 1-3 Working temperature: (20±5)? Packaging: wooden box

Jinggong Cast Iron Grinding Surface Plates are mainly used for manufacturing and repair the measuring tools, grinding parts, production high precision machinery parts, processing the optical instruments. Grinding plates with a homogeneous, compact structure, has no defects such as air holes, sand holes and any others to effect the usage. It has the advantages of easy on the sand and the sand distributed wealth, the performance is strong when sand embedded in a solid cutting. It is also smooth, shiny, sky blue in surface, with good wear resistance. The raw material is the high-strength cast iron GG20-GG30 (HT200-300). The size range is from 100mm 100mm to 3000mm 8000mm. Larger one can be made according to the drawing. Features: 1.Simple in operating, fast on the sand, the amount of sand embedded in foot. It is still very easy to use the same sand on the back, after grinding, finish improved significantly. 2.Easy to get the required amount of blocks of a high finish and research together, piece mirror green (clear) lights. 3.Durable in use, cutting enough and long-lasting. Light guide after sand still has good machine ability, more smooth when pushing.

SIZES 500*420 (THICKNESS - 21" , 23" , 25") 520*520 (THICKNESS - 30 " ) PRICE: 500 * 420 1. THICKNESS 21" - RS .3500 2. THICKNESS 23 " - RS 4000 3. THICKNESS 25" - RS . 4300 NOTE : (THIS COST IS OUR FACTORY PRICE )

The Cast IronGrinding Surface Plates is mainly used for manufacturing and repair themeasuring tools, grinding parts, production high precision machinery parts,processing the optical instruments. Grinding Plates with a homogeneous, compact structure, has no defects such as air holes, sandholes and any others to effect the usage. It has the advantages of easy on thesand and the sanddistributed wealth, the performance is strong when sand embedded in a solidcutting. It is also smooth, shiny, sky blue in surface, with good wearresistance. The raw material is the high-strength castiron GG20-GG30 (HT200-300). The size range is from 100mm*100mm to3000mm*8000mm. Larger one can be made according to thedrawing.

Jinggong Cast Iron Coordinate Lineation Surface Plates serve as the datum plane for precise measurement and all kinds of inspection/lineation tasks. Some coordinate lines on the working surface are convenience for measurement at any time. The raw material of the plates is the high-strength cast iron GG20-GG30 (HT200-300). After two times annealing treatment, the plates have the features of steady precision and abrasion resistance. The size range is from 100mm*100mm to 3000mm*8000mm. Larger one can be made according to the drawing.

The Cast Iron Coordinate Lineation Surface Plates serves as the datum plane for precise measurement and all kinds ofinspection lineation tasks. Some coordinate lines on the working surface areconvenience for measurement at any time. The raw material of the plates is thehigh-strength cast iron GG20-GG30 (HT200-300). After two times annealingtreatment, the plates have the features of steady precision and abrasionresistance. The size range is from 100mm 100mm to3000mm 8000mm. Larger one can be made according to the drawing.

Normally the size is not larger than 3000x8000mm; if larger one is needed, we can joint together several smaller ones by connecting bolts.

The Cast Iron T/V/U-slot Surface Plates is mainly used as machining working surfaceof machine tools. Some holes and T-slots on the top surface of plates forfixing the work piece and clearing the scrap iron during the processing. The rawmaterial is the high-strength cast iron GG20-GG30 (HT200-HT300). The size rangeis from 100mm*100mm to 3000mm*8000mm. Larger one can be made according to the drawing.

The Cast Iron T/V/U-slot Surface Plates is mainly used as machining working surfaceof machine tools. Some holes and T-slots on the top surface of plates forfixing the work piece and clearing the scrap iron during the processing. The rawmaterial is the high-strength cast iron GG20-GG30 (HT200-HT300). The size rangeis from 100mm 100mm to 3000mm 8000mm. Larger one can be made according to thedrawing.