Nitrogen Generator Introduction: The Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply and filling nitrogen cylinders. Our PSA Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. The patented vessel design enable our PSA Nitrogen Generator a lowest energy consumption and best efficiency. Nitrogen Generator specifications: 1. Nitrogen production capacity: 2~2000Nm3/h 2. Nitrogen purity: 90%, 99%, 99.5%, 99.9%, 99.99%, 99.999%, 99.9995%... 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Skid-mounted enable an easy installation and transportation. Nitrogen Generator Features: (1) The Nitrogen Generator is equipped with a stable Atlas Copco screw air compressor; (2) The Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Nitrogen Generator more reliable, and less maintenance jobs; (4) The Nitrogen Generator does not need foundation base; (5) The Nitrogen Generator does not need cooling water; (6) The Nitrogen Generator is skid-mounted, very easy to be transported and installed; (7) The Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (8) The Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (9) The Nitrogen Generator can be used for both onsite application and filling oxygen cylinders. (10) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Specifications: CBN Type PSA Nitrogen generator Flow: 5-3000Nm3/h Purity: 95%-99.999% Dew-point temperature: -40° C or -60 ° C Pressure: 0.1-0.8Mpa
-N2 flow:0-500ml/minute -Nitrogen purity:99.9995% -Output pressure:0-4bar -Input power: -
Psa (pressure swing adsorption) nitrogen generator Purity: 95%--99.9995% Oem manufacurer, rated flow: 3--6000nm3/h, customized Pressure: 0.8mpa & adjustable Dew point: =-45oc Resonable price with high quality, iso certificate, tuv certified. Principle Psa nitrogen making device to clean the air as raw material, carbon molecular sieve as adsorbent, by pressure swing adsorption principle in normal temperature down to obtain nitrogen equipment. According to the diffusion rate between the adsorption amount of oxygen, nitrogen in the air in the carbon molecular sieve and oxygen and nitrogen in carbon molecular sieve in different, by opening and closing the plc controal program control valve, to achieve pressure adsorption, vacuum desorption precess, oxygen, itrogen separation to get nitrogen purity desired. Characteristic * provide maximum business value * molecular sieve filling and compacting, adopt the professional way to complete in a professional context, higher density, higher efficiency * design optimization, process and structure of the system, to play the greatest potential, higher reliability * special valve by one million times, frequent switching fault free, and stable operation of security system * nitrogen can automatically record, easy to locate any work time , work state * system design more reasonable, more secure, more reliable. * automatic operation, the system, the whole process can be achieved unattended. Which nitrogen generator should i choose? Different parameters are essential for your choice of nitrogen generator • how big is your consumption? • is your consumption variable? • which pressure is required? • what purity/capacity is required? • do you already have a compressed air system? Why choose yangtian? *be your own supplier, customized. *mobile and flexible sloutions *produce gas when and where you want *save your installation cost *minimum maintence .Fully automatic operation *only quality compenents are used.
Introduction: Psa nitrogen making machine is a new type of air separate equipment, taking the compressed air as raw material, taking the carbon molecular sieve as the sorbent, and adopting the transformation adsorption technique to produce nitrogen. Under the normal temperature and high pressure environment, it uses the different diffusing speed of nitrogen and oxygen in the carbon molecular sieve, separating nitrogen and oxygen. And the purity of nitrogen and the output can be adjusted based on customerí»s requirements. Usage: 1íómetal heating treatment: nitrogen protection bright annealed, metal powder sintering nitrogen protection, gas carburizing quench, etc. 2íóchemical industryú¦mainly used for protection air, replacement air and washing air to ensure safety of production. 3íóelectron industryú¦used for producing electron part and protecting production line. 4íófood industryú¦using nitrogen protection storage vegetables, fruits, seeds and tea, etc. 5íómedical industryú¦packaging the nitrogen into medicine to storage and transportation. 6íóother industryú¦eg. The nitrogen protecting in the floats law glass production line. Main technical parameter and collocation Type:jtpsa-n Output:5í½1000nm3/h Pressure:0.6í½0.8mp Dew point after purified:-40í½-65íµ Purity:99.99%
Airgreat Nitrogen Generator with the PSA sophisticated machinery and technological innovation, providing low-cost and high-quality products of nitrogen gas. Nitrogen gas is the main component of air.Because it's difficult to react with other chemical substances, nitrogen gas is usually used as the protection gas in production, and is widely used in electronics, chemicals, coals, foodstuffs,pharmacies,magnetic materials, cables, metal processing, ports, transports, tires, thermoelectric, metallurgy, glass and other industries. 1130*750*2120mm 1000kg
Nitrogen Generator Lixin is a professional manufacturer of PSA Nitrogen Generators, with over 13 years of experience in designing and producing nitrogen pressure swing adsorption (PSA) systems. We offer a wide range of standard models, ensuring that we have a solution to meet your needs. What is a PSA Nitrogen Generator? Pressure Swing Adsorption (PSA) is a technology used to separate specific gases from a mixture under pressure, based on the molecular characteristics of the gases and their affinity for the adsorbent material. Unlike cryogenic distillation, PSA operates at near-ambient temperatures. It uses specialized adsorbent materials, such as activated carbon or molecular sieves, which selectively adsorb the target gas at high pressure. The process then switches to low pressure to release or desorb the captured gas. How Do PSA Nitrogen Generators Work? The PSA process leverages the principle that gases are attracted to solid surfaces under high pressure, a phenomenon known as adsorption. The higher the pressure, the more gas is adsorbed; when the pressure decreases, the adsorbed gas is released, or desorbed. This process can effectively separate gases from a mixture because different gases have varying levels of attraction to different solid surfaces. For example, when a pressurized gas mixture (such as air) is passed through a vessel containing a bed of carbon molecular sieve (CMS) adsorbent, which has a higher affinity for oxygen than nitrogen, the oxygen will be retained in the bed while the nitrogen-rich gas exits the vessel. Once the adsorbent bed reaches its capacity to hold oxygen, it is regenerated by reducing the pressure, allowing the oxygen to be desorbed. The cycle then repeats, enabling the continuous production of high-purity nitrogen. By using two adsorbent vessels, near-continuous production of nitrogen is possible. This setup also allows for pressure equalization, where gas from the depressurizing vessel is used to partially pressurize the second vessel, resulting in significant energy savingsa standard practice in industrial applications.
Supplier: Psa nitrogen generation plant
Cms specificaiton: 1. Cylindrical diameter: 1.0mm, 1.3mm, 1.5mm, 2.0mm. (also can produce according to requirement if volume is ok) 2. Appearance: black column 3. Diameter height ratio: 1:1.5~3 5. Crushing strength: > 100n/p min 6. Dust level: 99% 8. Packing: 20kg/40kg plastic drums 9. Bulk density: 660-700g/l 25kg plastic drum
