Transmission Cross Arm

Electrical Cross Arm Overhead Line Fittings Power Line Hardware Specification: A cross arm is provided, for use in a support structure for conductors within an electrical grid.  Cross arm coming with many sizes including 4ft, 6ft, 8ft and so on. Some places need cross arm coming with welded parts. The surface processing way is hot dip galvanize.

Supplier: Electric pole cross arms, connecting/adjustable yoke plate, ball eye, parallel groove clamps, galvanized steel stay rod, vabration hammer for electric aerial cable fitting, bolts and nuts.Jinhan1816 at hotmail

Supplier: Equipment clamps/terminal connector, suspension clamps, strain clamps, link fittings, t clamp, substation fittings, guy wire fittings, cross arm hoop, optical fiber cable fittings, substation fittings, guy wire fittings, preformed helical fittings, suspension insulated conductor fittings, splicing fittings

Structure: Single fiber, double fiber, four fiber, six fiber and muti-fiber ctc. Applications: Apply to transnaision equipment telephone data processing equipment and communication, and it is optical transmission wire in transmission network. Cable cross-section Pdr chromatogram Outer sheath: Orang -- muti mode optical fiber Yellow -- mode optical fiber Lnner sheath: Orang -- muti mode optical fiber Yellow - - single mode optical fiber Muti-cable: Outer coating--orange Cable specifications: Attenuation coefficient and bandwidth level Attenuation coefficient

*2 sides, 3 sides and 4 sides low relaxation indented pc wire. *raw material:swrh 82b/swrh 77b wire rob ding custruction, water conservancy projects, railway sleepers, tunnels, frame of roofs, overhead crane beams, industrial and civil prefabricated concrete slabs, wall boards, tubular piles, pc water pipes, tv towers and so on. *advantage: > good fixed performance > steel wire cross-section area without any loss > reduce the length of transmission significantly > high strength, low relaxation Baling strip strapped, inner is water-proof plastic, outer is polypropylene wonven bag in coil, or according to the customers¡¦ requirements.

1. Applications Conductor(aac, aaac and acsr) have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist. 1).The permissible long-time operating temperature for aerial conductor is 70oc. (2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power. (3).When connecting conductors, the conductor beside the connecting tube cant be prominent.Otherwise, the force on the operating conductors will be unbalanced.After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion. (4).Under installaion, the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress. According to your requirement

1, Use: Aluminum wire and ACSRs structures are simple. They are easy to set up and maintenance. The cost is low in building the lines. The transmission capacity is large. They are also convenient to cross special geographical conditions, such as rivers, valleys and so on. So the products are applied for various voltage levels of overhead transmission and distribution lines. 2, Model Model Name cross sectional area LJ aluminum wire 16-500 LGJ ACSR 10-240 GB/T1179-1999 "Round wire concentric lay, stranded conductors" standard is equivalent to IEC61089-1991 standard. According to user needs. Our company can produce the aluminum wire and ACSR on the basis of ASTM, DIN, BS and other standards. Note: the products model and code in GB1179-83 of the new and old standard still has a large number of users and market, it can be used as non-standard£¨or users special needs£© when ordering the products. 3, material standards: Aluminum wire and ASCR with a hard steel core execute GB/T17048 (identical with IEC60889 standard). ACSR with galvanized steel execute IEC60888 standards. According to users needs, we can produce the production on the basis of the user's material standards and requirements. 4, product performance: the electrical properties of aluminum wire and ACSR should be showed as the resistance at 20 ¡æ. Hard aluminum wire's resistance is not greater than the international standard value 0.028264¦¸.mm2 / m. ACSR has three intensity levels: general intensity level ACSR, high strength ACSR and extra high strength grade level ACSR. 5, product maintenance: the product should avoid squeezing and bumps during handling and transportation. Cables should not be laid flat during the transportation and storage. Product should take moisture measures during storage.

Supplier: Electrical Item I.e. Overhead Line Conductor, Insulator, Ab Switch, Distribution Box, Transformer, Lbs, Ring Main Unit,v Cross Arm, Underground Cable, Wire, Solar Panel, Switches Etc.
Buyer: Electrical Item I.e. Overhead Line Conductor, Insulator, Ab Switch, Distribution Box, Transformer, Lbs, Ring Main Unit,v Cross Arm, Underground Cable, Wire, Solar Panel, Switches Etc.