This is a plasma in argon gas at a pressure of about one thousandth of an atmosphere, with the temperature of the plasma electrons about thirty thousand degrees. Plasmas like this are used for processing semiconductor materials
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Supplier: FRP Fan, FRP Tank, FRP pipe, FRP Waste Scrubber, VOC Adsorption Tower, Industrial Epoxy Flooring, Low Temperature Plasma Deodorant Scrubber, Wet Electrostatic Precipitator
ProductASME 165 longweldneck flanges BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating45 based on 22 reviews priceStart from 20 USD With regard to our wellheeled industrial experience RFP India offers a total range of Long Weld Neck Flanges We provide different types of Long Weld Neck Flanges such as Stainless Steel Long Neck Flanges Carbon Steel Long Neck Flanges Alloy Steel Long Neck Flanges Nickel Alloy Long Neck Flanges Copper Alloys Long Neck Flanges Low Temperature Carbon Steel Long Neck Flanges Duplex amp Super Duplex Steel Long Neck Flanges etc Comes in dissimilar grades sizes specifications and standards these neck flanges are being supplied from the mosttrustworthy vendors by our experts Meanwhile these flanges are kind of exclusive for the reason of their uncomplicated connectivity with other pipes RANGE 15 NB to 60 1500NB in 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS ASA 150 ASA 300 PN 6101625 4064100160 ETC available with NACE MR 0175 SIZE 15NB to 60 1500NB CLASS PRESSURE Class Pressure 150 300 600 900 1500 2500 PN6 PN10 PN16 PN25 PN40 PN64 DIMENSION B165 BS4504 EN1092 B1636 B1647 B1648 MSS SP44 STD STD ANSI Flanges ASME Flanges DIN Flanges EN Flanges BS Flanges API JIS NACE etc FEATURES Dimensional accuracy Corrosion resistance High efficiency Excellent finish Durable Stainless Steel Long Weld Neck Flanges Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Long Weld Neck Flanges Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Long Weld Neck Flanges Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Long Weld Neck Flanges Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Long Weld Neck Flanges Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Long Weld Neck Flanges Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Long Weld Neck Flanges Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Long Weld Neck Flanges Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Long Weld Neck Flanges Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Long Weld Neck Flanges SS 310 310S Long Weld Neck Flanges Duplex Steel UNS S31803 Long Weld Neck Flanges Stainless Steel 304 304L Long Weld Neck Flanges Duplex Steel Long Weld Neck Flanges
ProductThermolet outlets BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating4 based on 4 reviews priceStart from 10 USD Owing to our affluent industry experience RFP India has been quite unbeaten in catering to the needs of our wellregarded benefactors by offering Thermostat Outlets Thermostat Outlets tools are being used to put in the required well and are also being designed to put in a lot of varieties of dissimilar length and size sensors and wells The required Thermowell is being held by an exceptional holding hex socket joined to a functioning rod that passes all the way through a sealed well housing This type of device is recognized as the ThermoletTool and when weighed down by means of the required Thermowell is joined to the impermanent valve in a water tight manner RANGE Outlets to 24 in 3000 LBS 6000 LBS 9000 LBS available with NACE MR 0175 Stainless Steel Thermostat Outlets Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Thermostat Outlets Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Thermostat Outlets Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Thermostat Outlets Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Thermostat Outlets Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Thermostat Outlets Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Thermostat Outlets Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Thermostat Outlets Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Thermostat Outlets Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 OTHER Hydraulic Fittings   Instrumentation Fittings Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Thermolet SS 310 310S Thermostat Outlets Duplex Steel UNS S31803 Thermostat Outlets Stainless Steel 304 304L Thermostat Outlets Duplex Steel Thermostat Outlets Stainless Steel 316 316L Thermostat Outlets Duplex Steel UNS S32205 Thermostat Outlets Stailess Steel 321 321H Thermostat Outlets Super Duplex UNS S32750 Thermostat Outlets Monel 400 Thermostat Outlets Hastelloy C276 Thermostat Outlets SS Thermostat Outlets Steel Thermostat Outlets Inconel 625 Thermostat Outlets Alloy 20 Thermostat Outlets CuNi 7030 C71500 Thermostat Outlets CuNi 9010 C70600 Thermostat Outlets ASTM A105 Thermostat Outlets
ProductSweep outlets BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating39 based on 9 reviews priceStart from 10 USD RFP India is a renowned exporter manufacturer and supplier of Socket Weld Outlet Fittings in the steel market industry worldwide Sweep Outlets is relatively like a pipe saddle On the other hand it has been manufactured in such a way by means of regard to trim down the pipe stresses and stress concentration features The weld is able to be look at by emblematic weld inspection ways such as radiography and ultrasound inspections In the meantime they have sturdy seamless manufacture dimensional sturdiness and accurateness The offered outlet is widely used for pipe connection in industries They are made up of different grades of standard ranges and meet its terms all the way through international and national standards RANGE Outlets to 24 in 3000 LBS 6000 LBS 9000 LBS available with NACE MR 0175 Stainless Steel Sweep Outlets Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Sweep Outlets Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Sweep Outlets Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Sweep Outlets Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Sweep Outlets Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Sweep Outlets Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Sweep Outlets Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Sweep Outlets Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Sweep Outlets Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 OTHER Hydraulic Fittings   Instrumentation Fittings Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Sweep Outlets SS 310 310S Sweep Outlets Duplex Steel UNS S31803 Sweep Outlets Stainless Steel 304 304L Sweep Outlets Duplex Steel Sweep Outlets Stainless Steel 316 316L Sweep Outlets Duplex Steel UNS S32205 Sweep Outlets Stailess Steel 321 321H Sweep Outlets Super Duplex UNS S32750 Sweep Outlets Monel 400 Sweep Outlets Hastelloy C276 Sweep Outlets SS Sweep Outlets Steel Sweep Outlets Inconel 625 Sweep Outlets Alloy 20 Sweep Outlets CuNi 7030 C71500 Sweep Outlets CuNi 9010 C70600 Sweep Outlets ASTM A105 Sweep Outlets ASTM A350 LF2 LF3 Sweep Outlets Inconel 600 Sweep Outlets Hastel
ProductThreading outlets BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating44 based on 55 reviews priceStart from 10 USD RFP India is a distinguished exporter manufacturer and supplier of Threading Outlet Pipe Fittings in the steel market industry worldwide The Threading Outlets is being well thoughtout as a threaded fitting and is being made up of in classes such as 3000 6000 and 9000 And thus these fittings are accessible in plummeting or full size branch associations for the every class of 3000 6000 or 9000 branch socketwelding outlets The offered socket is at length used in industries for pipe connection These fittings provide a selfreinforced and onepiece connection The sphereshaped design of it allows the usage of mechanical burning machinery RANGE Outlets to 24 in 3000 LBS 6000 LBS 9000 LBS available with NACE MR 0175 Stainless Steel Threading Outlets Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Threading Outlets Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Threading Outlets Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Threading Outlets Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Threading Outlets Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Threading Outlets Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Threading Outlets Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Threading Outlets Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Threading Outlets Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 OTHER Hydraulic Fittings   Instrumentation Fittings Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Threading Outlets SS 310 310S Threading Outlets Duplex Steel UNS S31803 Threading Outlets Stainless Steel 304 304L Threading Outlets Duplex Steel Threading Outlets Stainless Steel 316 316L Threading Outlets Duplex Steel UNS S32205 Threading Outlets Stailess Steel 321 321H Threading Outlets Super Duplex UNS S32750 Threading Outlets Monel 400 Threading Outlets Hastelloy C276 Threading Outlets SS Threading Outlets Steel Threading Outlets Inconel 625 Threading Outlets Alloy 20 Threading Outlets CuNi 7030 C71500 Threading Outlets CuNi 9010 C70600 Threading Outlets ASTM A105 Threading Outlets ASTM A350 LF2 LF3 Threading Outlets Incone
ProductSocket weld outlets BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating47 based on 18 reviews priceStart from 10 USD RFP India is a distinguished exporter manufacturer and supplier of Reducer Butt Weld Pipe Fittings in the steel market industry worldwide Socket Weld Outlet offers a selfsupport and onepiece connection Circular design let use of mechanical burning tools It requires less weld material while reinstating 100 pipe or header potency In addition holes can be sliced down in the run after welding the outlet to further minimize the distortion RFP India manufactures and supplies these fittings to meet your madetoorder requirements in a privileged variety of special stainless steel and alloy grades nbsp RANGE Outlets to 24 in 3000 LBS 6000 LBS 9000 LBS available with NACE MR 0175 Stainless Steel Socket Weld Outlets Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Socket Weld Outlets Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Socket Weld Outlets Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Socket Weld Outlets Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Socket Weld Outlets Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Socket Weld Outlets Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Socket Weld Outlets Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Socket Weld Outlets Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Socket Weld Outlets Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 OTHER Hydraulic Fittings   Instrumentation Fittings Test Certificate Manufacturer Test Certificate as per EN 10204 31
Product: Outlets Brand: Renaissance Pipe Fitting Inc. Sizes: Refer to the specification Condition: New Rating:4.5, based on� 121� reviews price: Start from� 10� USD ASTM / ASME A/SA 182, B247, B361, ASTM B381, Stainless Steel Outlet Fittings, carbon steel Outlet, Alloy Steel Outlet, supplier. With thorough knowledge of the industry, we are engaged in stocking and supplying a wide range of outlets. These are manufactured in compliance with the industry standards and can be availed by the customers in varied specifications as per the demands. Our offered products are widely utilized in diverse industries for tightening screws and bolts. The offered products are appreciated in the market for their features like resistance against corrosion, high durability, and long working life TYPE : Socket Weld (S/W) & Screwed (SCRD) RANGE : Outletâ??s �¼â?? to 24â?? in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75. FORM : Weldolet, Sockolet, Elbolet, Thredolet, Nippolet, Latrolet, Sweepolet, Flangeolet, Thermolet Stainless Steel Outlet Fittings : Standard� : ASTM / ASME A/SA 182 Grade� : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Outlet Fittings : Standard� : ASTM / ASME A/SA 182 Grade� : F 44, F 45, F51, F 53, F 55, F 60, F 61 Aluminium Outlet Fittings : Standard� : ASTM B247, B361. Grade� : 2024, 6061, 6063, 6101, 7075. Titanium Outlet Fittings : Standard� : ASTM B381. Grade� : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Carbon Steel Outlet Fittings : Standard� : ASTM A 105/A694/ A350 LF3/A350 LF2. Grade� : F42/46/52/56/60/65/70 Low Temperature Carbon Steel Outlet Fittings : Standard� : ASTM A 350 LF2 / A350 LF3 Alloy Steel Outlet Fittings : Standard� : ASTM A182 Grade� : F1/F5/F9/F11/F22/F91 Copper Alloy Outlet Fittings : Standard  : ASTM / ASME SB 61 / 62 / 151 / 152. Grade  : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Outlet Fittings : Standard  : ASTM / ASME SB 564 / 160 / 472 Nickel 200 UNS N02200 Nickel 201 UNS N02201 Monel 400 UNS N04400 Monel K500 UNS N05500 Inconel K600 UNS N06600 Inconel 601 UNS N06601 Inconel 625 UNS N06625 Inconel 800 UNS N08800 Inconel 800H UNS N08810 Inconel 825 UNS N08825 Hastelloy C276 UNS N10276 Alloy 20 UNS N08020 Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1 Types Of Outlets SS 310 / 310S Outlets Duplex Steel UNS S31803 Outlets Stainless Steel 304 / 304L Outlets Duplex Steel Outlets Stainless Steel 316 / 316L Outlets Duplex Steel UNS S32205 Outlets Stailess Steel 321 / 321H Outlets Super Duplex UNS S32750 Outlets Monel 400 Outlets Hastelloy C276 Outlets SS Outlets Steel Outlets Inconel 625 Outlets Alloy 20 Outlets Cu-Ni 70/30 (C71500) Outlets Cu-Ni 90/10 (C70600) Outlets
