Nickel Alloy

Nickel alloy Instrumentation fittings are formed from nickel alloys, which are metals made by combining nickel with another substance as the primary constituent. It mixes two materials to produce improved properties such as greater strength or corrosion resistance. Because of its particular characteristics, it's employed in a wide range of equipment across a wide range of sectors. Nickel alloy is made by combining nickel with other metals such as titanium, copper, aluminum, iron, and chromium. Nickel alloy instrumentation fittings are more resistant to corrosion at temperatures above 1800 F. This makes them excellent for usage in harsh environments. Nickel alloy instrumentation fittings are resistant to oxidation and corrosion at high temperatures. Nickel alloy instrumentation fittings are very ductile and have high melting temperatures. They can be electroplated and welded readily, making them excellent for sectors that deal with extreme heat and cold. Nickel alloy instrumentation fittings can be put to use for approximately 25 to 35 years. It can survive for an even longer period of time depending on the application. Because of its extended service life, this metal is less expensive than other metals Nickel alloy instrumentation fittings are utilized in a wide range of applications due to their qualities, including food preparation equipment, medical equipment, laboratory equipment, aircraft, pharmaceuticals, building materials, aircraft and power turbines, nuclear power systems, and so on. Specification of Nickel Alloy Instrumentation Fittings Imperial Size 1/2 to 2 Size 1/16 OD to 2 OD, 2mm OD to 50mm OD Thread NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc. Pressure Rating 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass Temperature Ratings Up to 1000F (537C) Types Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. Our service Nace Mr 01 75 Sour Service Impact Test As Per Ug 84 Macro Structure Analysis Hydrogen Induce Cracking Test (Hic) Sulphide Stress Cracking Test (Sscc) Cryogenic Services (Cryo),hydrogen Services (H2) Helieum Leak Test Dye Peniterant Test (Dp) Magnetic Partius Test (Mp) Post Weld Heat Treatment (Pwht) Ultrasonic Test (Ut) Hydro Test, Etc. Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Production Technique Forged/ Heat treated and machined.

Syphon Size 1/2 inch Condensate Pot Size Pipe size 2, 3, 4, 6 and larger size upon request. Standard length: Pipe length 8, 10, 12, and larger length upon request. Pipe Schedule: 40, 80, 160, seamless pipe. NPT as per ANSI B2.1 taper pipe thread furnished. Socket weld as per ANSI B16.11 Butt weld as per ANSI B16.9 Working pressure: 6000 PSIG (41.34 MPa). Snubber Size Bore sizes 3/4 to 10 in diameter Travel ranges from 5 to 20 Load capacities from 738 lbs. to 187,900 lbs. Pipe Clamps 1/2 - 18 Inch Types Condensate Pot, Air Header, Pipe Clamp, Quick Release Coupling, Syphon Tube / Pipe, Pipe Clamp, Snubber, Lock Nut For O-seal, Gauge Snubber, Thermocouple, Thermowell, Gauge Adaptors, Gauge Saver, Pressure Gauge Accessories, Mini Ball Valve, Over-Pressure Protector, Cooling Tower, Adjustable Snubber Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. Air Header Size Inlet Connection Size:1/2, 3/4, 1 inch Raised Face, Female NPT, BSPT, BSPP 2,3 & 4 inches Drain Connection Type:Female NPT, BSPT, BSPP Drain Port Size:1/2, 3/4, 1 Working Pressure:6000 psi [413 bar] Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc