Foots Oil

is the remaining residue when process of manufacturing paraffin wax from slack wax is finished

Foots oil (residue wax)is the remaining residue when process of manufacturing paraffin wax from slack wax is finished , the main usage is for matches industry since its oil content is about 50% and has strong odor and color is quite brown .Residue wax (foots oil) is final remained product of slack wax after pressing and de-coloring . residue wax(foots oil) is mix of oil and slack wax. Residue Wax, formally known as Foots oil is a commodity derived from the production of semi refined paraffin wax, having almost 60% result from 100% of slacks provided by the oil refineries .
Uses of residue wax (foots oil)Brown color, high oiled wax named residue wax (foots oil) used for matches making, lubricants, explosive, fire work. Foots Oil can be used as hydrophobia impregnation material, fuel brick component, raw material for production of grease lubricants, conservation oils , lubricants ,tire, rubber and shoe soil industries. Residue wax (foots oil) is also used for Rubber Industries-Tire Industry-Shoe Industry-Plastic Industries-Polish-Match Box-Grease...
Packing:
Second Hand Drum
Drum Weight: 18 KGS
Drum Net Weight: 175 (+/-0.5)
No. Of Drum/FCL: 80
Viscosity 100C: 6-7.5
Flash Point: 230-250C
Color: Max 2

Residue Wax also known as foot oil is a byproduct obtained during the production of semirefined paraffin wax It contains oil content that prevents it from being solid at room temperature Residue wax is used in various applications including the rubber industry shoe
polish formulations and in making various protective coatings

Base Oil Or Virgin Oil

The purity of base oils means that your additive packages can be optimized to meet performance objectives at lower treat rates and reduced cost. Your formulators won’t have to worry about compensating for the quality of the base stock in your finished products. You have more freedom in new product development. Base oils can improve the performance of your finished engine oils and other lubricants.

Industrial Oil

Arsec Industrial Oil is ultra high performance lubricant for a vast array of uses, including long-service-life applications, high- and low-temperature applications, applications with the possibility of incidental food contact, and outdoor applications in marine environments and other areas where environmental concerns require the use of a very low-toxicity lubricant. Industrial oils are available in a wide range of ISO grades, with viscosities to meet any application requirement.

Oil refining means separating impurity from oil based on the different characteristics of oil and impurity, in order to enhance the stability and security of oil.

Technological process details of crude oil refinery for sale:
1. Acid reaction process
Oil temperature can be adjusted by screw plate heat exchanger. When the temperature is heated to about 80??, mixing about 85% food grade phosphoric acid into acid reaction tank for reacting. In the tank, most non-hydrated phospholipid transfer into hydrated phospholipid.
2. Neutralization process
In the neutral section, degummed oil with appropriate temperature and the appropriate concentration of alkali liquor, into the neutralization centrifugal mixer mixing, in order to achieve the best effect of mixed, the mixture is then sent to neutralization tank for enough time, in this process, excessive alkali neutralization of free fatty acids and some phosphate form soapstock , after pumping oil soap mixture into heater oil heating to 85 ~ 90 ?? in centrifuge separation oil - soap (or oil - glue). Oil soapstock of the separated (or foot) feet into the oil tank, and then to the salting out with soap pump tank isolated part of the oil.
3.Bleaching process
The main purpose of this procedure is to remove the pigments and residual soup in the neutralization oil of the crude oil. The oil is sent to vacuum bleaching tower after heated to 105�C. When the oil is sent into the tower, it is mixed by the ratio mixer with carclazyte whose dosing was control by a program controller and the dosing unit is installed on the ratio mixer directly. The carclazyte conveyor system power is the wind and the bleaching earth was conveyed to the carclazyte temporary storage tank in the upper part of the bleaching tower to supply the ratio mixer.
4. Filteration
Miscella mixed by oil and clay from decolorization tower is pumped into bleaching tower, then enters fine filter, in which clay and fixed impurities is blocked. And the filtering substance (bleached oil) is transferred into storage tank of bleached oil. There are two bleaching filters in this system, one of the bleaching filter is always in the state of filtering, another is in the state of emptying and cleaning state.
5.Deodorization process
Deodorization process aims to remove the FFA, low molecular compounds and others existing in bleached oil. The flow of bleached oil entering deodorization process is controlled by a flow controller, and the oil is heated to the deodorization temperature of 250-260?? through a series of heat exchanger.