Please click here to check who's online and chat with them.

U-Channel Tunnel Steel Support

Supplier From China
Aug-11-18

china coal0001
U-channel Tunnel Steel Support
Keywords: U-channel Steel Support, Tunnel Steel Support, Steel Support For Sale
Introduction of U-channel Steel Support For Coal Mine
U channel steel support cross section is shaped like the letter "U" in English. National production of u-shape cross-section shape, geometric parameters and material is different, at present China''''s production of u-shape model mainly include stepping, U25, U29, U36 these four. The stepping and U25 waist position; U29, U36 belongs to the ear. Stepping up the carrying capacity is very low, now rarely production.
U channel steel support with high initial supporting force, supporting intensity big, easy to install and is not easy to deformation, so often used in the manufacture of roadway yielding metal stents, mine, mine roadway secondary supporting of roadway, and mountain tunnel support support purposes
Use, effectively reduce the roof caving u-shape set, help such as accidents, safe and reliable, and enhances the stability of the mine ventilation system. Choose u-shape flexible support, better solved the difficult problem of the excavation support
Structure of U-channel Steel Support For Coal Mine
3.Connection parts
Fitting is a support section and internode card device, can the internode connection effect, can also be connected the two compression steel joint parts, provide pre-tightening force, make the u-shape between friction, thereby ensuring that the arch has a certain resistance and certain drop-off.
4.Rod between support
Rod between support is to enhance the relative stability, the support bracket from longitudinal connection, form a whole.
5.Back-up material
Back-up material is u-shaped steel support between supports and surrounding rock filling material, the purpose is to make contact with the surrounding rock u-shape set close together, improve the stress of the support, to improve the bearing capacity and maintain the stability of surrounding rock.
Characteristic of U-channel Steel Support For Coal Mine

1,Stand high pressure , support long time, easy to installation and not easy to be out of shape
2,compared with other rigid support , U-shaped steel support has a scalable and reliable carrying capacity to adapt to load and deformation of soft rock.
3,U-shaped steel support bracket support cross back high utilization convenient small amount of maintenance.
4,U3 steel support recycling reuse rate, reduce prop use, very obvious environmental benefits.


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: U-Channel Tunnel Steel Support

Aug-29-18
 
china coal 0001
U-channel Tunnel Steel Support
Keywords: U-channel Steel Support, Tunnel Steel Support, Steel Support For Sale
Introduction of U-channel Steel Support For Coal Mine
U channel steel support cross section is shaped like the letter "U" in English. National production of u-shape cross-section shape, geometric parameters and material is different, at present China''''s production of u-shape model mainly include stepping, U25, U29, U36 these four. The stepping and U25 waist position; U29, U36 belongs to the ear. Stepping up the carrying capacity is very low, now rarely production.
U channel steel support with high initial supporting force, supporting intensity big, easy to install and is not easy to deformation, so often used in the manufacture of roadway yielding metal stents, mine, mine roadway secondary supporting of roadway, and mountain tunnel support support purposes
Use, effectively reduce the roof caving u-shape set, help such as accidents, safe and reliable, and enhances the stability of the mine ventilation system. Choose u-shape flexible support, better solved the difficult problem of the excavation support
Structure of U-channel Steel Support For Coal Mine
1.Top Beam
Top beam is circular arch, its amount depending on the cross section of roadway with different sizes, support force, transportation conditions, section 1 and section number.
2.Column leg
There are three kinds of back leg , one kind is upside for circular arc form, for straight line at the bottom; The second is all for the curved shape, and only one radius of curvature; The third is all for the curved shape, but there are two curvature radius. Back leg in welding under the base, the base of large plate on the hard and soft;
3.Connection parts
Fitting is a support section and internode card device, can the internode connection effect, can also be connected the two compression steel joint parts, provide pre-tightening force, make the u-shape between friction, thereby ensuring that the arch has a certain resistance and certain drop-off.
4.Rod between support
Rod between support is to enhance the relative stability, the support bracket from longitudinal connection, form a whole.
5.Back-up material
Back-up material is u-shaped steel support between supports and surrounding rock filling material, improve the stress of the support, to improve the bearing capacity and maintain the stability of surrounding rock.
Characteristic of U-channel Steel Support For Coal Mine

1,Stand high pressure , support long time, easy to installation and not easy to be out of shape
2,compared with other rigid support , U-shaped steel support has a scalable and reliable carrying capacity to adapt to load and deformation of soft rock.
3,U-shaped steel support bracket support cross back high utilization convenient small amount of maintenance.
4,U3 steel support recycling reuse rate, reduce prop use, very obvious envir
GOLD Member
VERIFIED
Jun-29-21
Supplier From Faridabad, Haryana, India
 
We are supplier of Steel Channels. Steel U channel, the size can be provided according to customer's requirement.
1)size: 51x25x3mm-305x80x13mm 2)material: q195, q215, q235, a36, ss400, ss540 3)packing:bundle with strips.
GOLD Member
VERIFIED
Jul-04-03
Buyer From Navi Mumbai, Maharashtra, India
GOLD Member
VERIFIED
May-24-07
Supplier From Shenzhen, Guangdong, China
GOLD Member
VERIFIED
Jun-12-19

Steel

MOQ: Not Specified
Supplier From Navi Mumbai, Maharashtra, India
 
Steel
GOLD Member
VERIFIED
Oct-21-14
Supplier From Southampton, United Kingdom
GOLD Member
Aug-03-16
Buyer From Ajman, United Arab Emirates
GOLD Member
VERIFIED
Jan-15-20
Supplier From Southampton, United Kingdom
 
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.

Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.

We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.

The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
GOLD Member
VERIFIED
Nov-15-19
Supplier From Southampton, United Kingdom
 
Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details

Verification Status