NAMS (Rack-mounted)
Rack Mounted Ethernet Tester
Ethernet Network Tester
xnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery network
XnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery networks. The appliance is a passive device that is used to non-intrusively monitor key network links to provide the visibility into network and applications
Network & Application Management Center is grouped by the following c
omponents.
Appliance HW&SW appliance for packet capturing and analysis
Console Windows-based UI for network visibility, management and troubleshooting
KEY FEATURES
Integrated solution of data recording, traffic analysis and problem diagnostics
Comprehensive non-blocking end-to-end application monitoring and Key Performance Indicators (KPIs) generating
Wire-speed packet capturingIndex powered fast packet retrieval
Embedded packet analyzer for ultra-fast packets decoding and troubleshooting decoding and troubleshooting
Flexible monitoring enabled by auto application detection and user-configurable traffic definition
Intuitive UI for network visibility, service quality and security alarms
Multiple Ethernet network interfaces, from 10/100/1000 Mbps to 10 GBE over copper or fiber
Flexible on-demand storage capacity provides right solution for various networks
Rack-mounted and portable appliances for different on-site deployment needs
Introduce For IPFS application The first optimized AMD storage platform for distributed storage Supports 32 x DIMM memory slots and 11 x PCIe expansion slots Suitable for applications such as IPFS, digital currency, blockchain, smart hardware, big data analysis and hyper-converged cloud computing.
1 × N rack-mounted optical switch can be manually selected from front panel or control via RS232 port, Ethernet port. It can be controlled to switch step by step or set scanning automatically in certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type 1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type V AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134 AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134
Introduction 2xN rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low Insertion Loss and Fast Switching SerialNet, High Reliability, High Stability LCD Display RS232 Control and Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system
XH-FSW-8-8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features: Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LED display panel. Visual display, Convenient operation. Transparent transmission signal. High stability and reliability. Channel and time interval of automatic scanning can be set up. RS232 Control and Ethernet Remote Management Applications: FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Specifications Parameters Unit Indicators Channel No. 8-8 Wavelength Range nm 1260~1650 Test Wavelength nm 1310/1550 Insertion Loss dB 2.5 dB Repeatability dB 0.04 Return Loss dB 50 Crosstalk dB 55 WDL dB 0.50 PDL dB 0.1 Optic Power mW 500 Fiber Type SM 9/125um Connector FC/APC Monitoring Port RJ45 RS-232 Working Power Supply Plug-type V AC:100ï½? 240 (50/60Hz) Power Consumption W 30 Operating Temperature -10 60 Size mm 4U:483 x 500 x 178
Model: AXD-15OPPM-T1 Screen Size:15 Screen format: 4:3 Display Resolution(pixel):1024Ã?768 Contrast Ratio:2000:1 Brightness:450cd/m^2 Storage temperature : -30~70 Input signal: VGA DVI HDMI Power Input: DC 12V Touch Type: Capacitive touch
12.1 inch Sunlight Readable LCD Monitor , 4:3 Eco Friendly Monitor 12.1 inch 4:3 format industrial LCD monitor with VGA input Aluminum front bezel with rugged frame design. such as Automatic equipments, Gas station, advertising embedded system etc.
Model: AXD-19OPPM-V1 Screen Size:19 Screen format: 4:3 Display Resolution(pixel):1280Ã?1024 Contrast Ratio:1000:1 Brightness:300cd/m^2 Storage temperature : -10~70 Input signal: VGA DVI Power Input: DC 12V Product status: Stock
10.4 inch industrial LCD open frame monitor with VGA input ( No touch)with rugged frame design used for Automatic equipments, ATM maintenance embedded system etc.
