Sodium Naphthalene Superplasticizer Concrete

The raw material naphthalene superplasticizer (SNF/FDN/PNS) has strong dispersion effect on cement particles and good use effect of preparing super flowing concrete as well as cast-in-situ concrete and precast members with early strength and high strength requirements, can comprehensively improve various properties of the concrete, and is widely applied to highways, bridges, dams, harbors, tunnels, electric power, water conservancy as well as industrial and civil architecture, steam-cured and naturally-cured precast members and so on. Specifications Model SNF-A appearance Light brown powder Solid content â?¥93% PH value 7-9 Sodium sulfate ï¼?5% Chloride ion ï¼?0.3% Water reduction 22%-25% Cement paste fluidity â?¥250mm Water Insolubles â?¤2% Air content â?¤2% Application 1. Construction: 1. Widely used in precast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc. 2. Suitable for preparation of early-strength, high-strength, high-anti-filtration and self sealing&pumpable concrete. 3. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed. 4. Compatible with Portland cement, normal Portland cement, Portland slag cement, flyash cement and Portland pozzolanic cement etc. Others: Because of the high dispersion force and low foaming characteristics, SNF has also been widely used in other industries as Anionic Dispersing Agent. Dispersing agent for disperse, vat, reactive and acid dyes, textile dying, wettable pesticide,paper,electroplating, rubber, water-soluble paint, pigments,oil drilling, water treatment,carbon black, etc.

Sodium Naphthalene Formaldehyde (SNF-Superplasticizer for Concrete) CAS Code: 36290-04-7 SNF a high range water reducer, commonly referred to as a super plasticizer, also named Naphthalene Sulphonate Formaldehyde Condensate (short name: SNF, PNS, NSF, etcâ?¦) SNF is made from naphthalene, sulfuric acid, formaldehyde and liquid alkali, through sulfonation, hydrolyzation, condensation and neutralization reaction and then drying to powder. SNF-A5% contains very small chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-2008 and GB50119-2003. Usage SNF produces concrete with extremely workable characteristics referred to as high slump. SNF also allows concrete to be produced with very low water/cement ratios at low or normal slumps. SNF is ideal for use in pre stress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. SNF will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. SNF is compatible with Portland Cement, Normal Portland cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc.

Sodium Naphthalene Formaldehyde (SNF-Superplasticizer for Concrete) CAS Code: 36290-04-7 SNF a high range water reducer, commonly referred to as a super plasticizer, also named Naphthalene Sulphonate Formaldehyde Condensate (short name: SNF, PNS, NSF, etcâ?¦) SNF is made from naphthalene, sulfuric acid, formaldehyde and liquid alkali, through sulfonation, hydrolyzation, condensation and neutralization reaction and then drying to powder. SNF-A5% contains very small chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-2008 and GB50119-2003. Usage SNF produces concrete with extremely workable characteristics referred to as high slump. SNF also allows concrete to be produced with very low water/cement ratios at low or normal slumps. SNF is ideal for use in pre stress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. SNF will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. SNF is compatible with Portland Cement, Normal Portland cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc.

Product description Trade Name Sodium gluconate Chemical Name Gluconic Acid Sodium Salt CAS.No. 527-07-1 HS code 291816 Towards :Food,concrete,textile,medicine,steel,glass bottle,water quality Chemical Expression:Sodium gluconate is the sodium salt of gluconic acid, produced by fermentation of glucose. It is a white to tan, granular to fine, crystalline powder, very soluble in water. It is non-corrosive, non-toxic and resistant to oxidation and reduction, even at high temperatures. Specification Food grade soldium gluconate Character White Crystalline Powder Content > 99 % Chloride < 0.05 % Arsenic salt < 3 PPM Lead salt < 10 PPM Heavy Metals < 20 PPM Sulfate SO4 < 0.05 % Reducing Substance < 0.5 % Loss on Drying < 1.0 % Application 1. cement admixture After a certain amount of sodium gluconate is added into the cement, it can improve the plasticity and strength of the concrete, and has retardation effect, namely postpone the initial and final setting time of the concrete; 2. Food additives Adjust the acid-base balance in human bodies to restore the normal function of nerves when used for medicine. It is used for food additives for the same purpose; 3. Water quality stabilizer a. It has apparent coordination effect which is applicable to various formulas such as molybdenum, silicon, phosphorus, tungsten and nitrite, and greatly improve corrosion inhibition effect due to the influence of coordination effect; b. Contrary to general corrosion inhibitors, the corrosion inhibition efficiency is increased with the rise of the temperature; c. Meet the technical requirements of scale-inhibiting abilities, has strong complexing capacity on Ca, Mg and Fe salts, and especially has excellent chelating effect on Fe3+; d. As a corrosion and scale inhibitor for circulating cooling water, it is superior to other corrosion and scale inhibitors used at present, and can achieve the effect of public nuisance removal. 4. steel surface cleaner If steel surfaces need to be platinum, chromium, tin and nickel-plated for special uses, the surfaces of their billets all need to be strictly washed to make coatings and steel surfaces firmly bound, and the adding of the sodium gluconate into their cleaning agents will achieve perfect effect at this time; 5. Glass bottles cleaner The professional cleaning agent for glass bottles with the sodium gluconate as a main formula can improve the following frequently asked problems: Poor detergency, and easy blocking of nozzles and pipelines of bottle washers; Unsatisfactory detergency on the rust of bottle labels and bottle necks; Unsatisfactory food safety caused by trace residue (such as phosphate residue); And public nuisance formed by the discharge of washing water; 6. Can be used for industrial fields such as electroplating, film manufacturing and so on.

Supplier: Concrete admixture, sodium naphthalene sulfonate formaldehyde, sodium gluconate, polycarboxylate superplasticizer

1,Blend dosage range is 0.5-1.2%. Appropriate blend dosage can be selected according to project object and the materials used during application. 2,FDN powder is recommended to be applied in solution. It can be used in dry form, but make sure mix it thoroughly with concrete. 3,If this product is applied with adoption of stagnant water blending method or post-blend approach, water reduction and dispersion will be better. 4,This product can be formulated with concrete additives of other varieties. It can be "double blended" with blending materials such as fly ash, ground slag, etc. But the blend dosage shall be calculated based on the total of cementing materials. 5,When this product is used for the first time or cement variety is changed, concrete trial preparation shall be conducted according to the adopted materials and construction requirements in the field. Construction mixing rate shall be adjusted based on testing result to serve as instruction for construction blending.