Copper Tee (Equal) :
Tee is a fitting in the shape of a T where the top of it is the continuous pipe run and the vertical section is a branch connected to it. Tees offer multiple options and used in a variety of applications. We offer varieties of Tees multiple dimensions like one end having smaller diameter and cross Tees, which are used to connect four tubes or a threaded Tee when the vertical section of it has female threads.
We are offering our clients, quality Copper Tee. These are Used for refrigerator, water dispenser, air-conditioner, warm ventilation, central air conditioner controls system, building installation. The Tees are used in diverse engineering applications.
Full flow, standard radius fittings supplied roll grooved and ready for installation into copper systems using either a Style 607 Quick Vic assembly-ready coupling or a Style 641 Vic-Flange adapter.
Copper Tee (Unequal) : Copper Tee offers the most varieties of fittings than any other type. It is basically a fitting in the shape of a T. Its top is for the continuous pipe run & the vertical section is to connect the branch. Copper reducing tee do not have equally sized part, used when one end of the section is of smaller diameter.
- COMMODITY: Electrolytic Copper Cathode Grade A - Delivery: Immediately - Specification: Copper Cu 99.97% -99-99% - Dimensions : 914 mm x 914 mm x 12 mm (LME Standards) Weight of each sheet: 125 Kilograms (Approximately �± 2%) - Documents Seller will provide all relevant documents (POP); these include Analysis Certificate, Certificate of Ownership, and Certificate of Origin. Bill of Lading, Packing List and Insurance 110% are obtained once the goods are loaded into the vessel. - Procedures i. The Buyer issues LOI & parties execute an NCDA ii. Seller Mandate issues FCO which is signed and returned by the Buyer iii. The Seller issues draft Sales and Purchase Agreement (SPA) for Buyer's review and acceptance. iv. The Buyer returns amended SPA with Buyer's signature and seal together with Proof of Funds (RWA Bank letter or MT799 or Bank Comfort Letter). v. The Seller countersigns and completes SPA with all applicable banking coordinates. vi. The Seller confirms the availability of the Copper Cathodes and provides a full set of Proof of Product (POP) documents. vii. Buyer's bank issues draft DLC MT700 to seller's financier's bank and the parties confirm the verbiage of the LC payment guarantee. viii. Buyer issues revolving LC in the amount equal to one month's supply (10,000MT) and this activates Seller's 2% Performance Bond (PB).. ix. Seller arranges shipping of the trial shipment of 1,000 MT and provides the Buyer with full shipping documentation, including SGS or equivalent inspection at port of lading. x. Buyer pays for the trial shipment by T/T SWIFT MT103 within 72 hours of SGS/CIQ inspection at Buyer's discharge port. The process repeats for each of 36 monthly shipments.
We are offering our clients, quality Copper Tee. These are Used for refrigerator, water dispenser, air-conditioner, warm ventilation, central air conditioner controls system, building installation. Our range of products is check by the quality experts on required quality parameters so that they comply with international quality standards.
C17200/CuBe2/CW101C/DIN 2.1247 Beryllium Copper C17200 is manufactured to provide a combination of high strength and hardness properties coupled with superior thermal properties. This range of properties makes C17200 the premier material for copper alloy molds and a wide range of other applications from oil and gas to aerospace. Chemical Composition: Be: 1.80-2.0% Co+Ni: 0.20% Min. Co+Ni+Fe: 0.60% Max. Cu: Balance Note:Â Copper plus additions equal 99.5% minimum. Material description: High strength, good fatigue strength, good conductivity, non-magnetic, wear resistance Applications - Nozzles and needles for hot runner systems - Inserts in plastic blow moulding and plastic injection moulding - Needles and nozzles for hot canal systems - Packing bearings rings in extreme high pressure hydraulics(e.g. jet cutting) - Stud holders for stud welding equipment - High strength, non-magnetic, non-sparking parts, sleeves,bushings, bearings for offshore, onshore, airplanes, precision instruments and medical applications moulding Shapes : Round bars, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Available Sizes: Rod: Dia.5~200mm; Wire: Dia.0.1-5.0mm Tube: OD10~60mm, ThK 0.1~10mm Plate: thk min 0.5mm Custom Diameter & Sizes, Random Mill lengths Related Standard : Rods/Bars/:Â ASTM B196; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651; RWMA Class 4, GOST 15835 Tubes: ASTM B251,643 Strips:Â ASTM B194, AMS4530,4532; SAE J461,463, GOST 1789 Â Sheets:Â ASTM B194 Wires:Â ASTM B197, AMS4725, SAE J461,463, JIS 3270, GOST 15834 Plates:Â ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4. European Standards:Â CuBe2, DIN 2.1247, CW101C to EN, BrB2 Other material are also available C17300/CuBe2Pb/CW102C/DIN 2.1248 C17500/CuCo2Be/CW104C/DIN 2.1285 C17510/CuNi2Be/CW110C/DIN 2.0850 CuCo1Ni1Be/CW103C
CuCo1Ni1Be/CW103C Cobalt Nickel Beryllium Copper Chemical Composition: Be: 0.40-0.70% Co: 0.80-1.30% Ni: 0.80-1.30% Cu: Balance Note: Copper plus additions equal 99.5% minimum. Shapes : Round bars, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Available Sizes: Rod: Dia.5~16mm; Wire: Dia.0.1-5.0mm Tube: OD10~60mm, ThK 0.1~10mm Plate: thk min 0.5mm Custom Diameter & Sizes, Random Mill lengths Typical Physical Properties: Density (g/cm3): 8.83 Density before age hardening (g/cm3): 8.75 Elastic Modulus (kg/mm2 (103)): 14.10 Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6 Thermal Conductivity: 209 W/m � oK at 20 C Melting Range (°C): 1000-1070 Note: 1). the units are based upon Metric. 2). the typical physical properties apply to age hardened products. Related Standard : Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3 Sheets: ASTM B534 Wires: ASTM B441 Plates: ASTM B534, SAE J461,463; RWMA Class 3 European Standards: CuCo1Ni1Be, CW103C to EN Other material are also available C17200/CuBe2/CW101C/DIN 2.1247 C17300/CuBe2Pb/CW102C/DIN 2.1248 C17500/CuCo2Be/CW104C/DIN 2.1285 C17510/CuNi2Be/CW110C/DIN 2.0850 CuCo1Ni1Be/CW103C
Min. Order / Reference FOB Price 500 Pieces : US $0.5/ Piece Port : Ningbo, China Production Capacity : 500000000000PCS Payment Terms : L/C, T/T, D/P Connection : Male Shape : Equal Head Code : Round Angle : 90 Degree Wall Thickness : STD Material : Copper
Straight coupling Standard:bs864-2, asme b16.22-1995, many sizes
Reducing coupling This product can joint copper tube in hot and cold water services, heating systems, in sanitation services for domestic, commercial and hospital applications very well. More than 4 standards , many sizes
