Anti-Corrosive Tape

Guanfang930 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine.

Single side butyl rubber wrap tape anti corrosion for gas pipe Outer Wrapping Tape The XUNDAT200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outerlayer tape backing shall be compounded so that it will be resistance to outdoor weathering.The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machineCorrosion protection tape for metal pipeline is polyethylene cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. Usage and Features: 1. Widely used on underground and overhead pipelines anticorrosion protection system. 2. Excellent adhesion to pipe and self 3. Resistant to UV 4. Can be applied over a wide temperature range from-30°C to 80°C 5. Good conformability and consistent uniform thickness 6. Cold applied ,and easily applied with no special equipment 7. Compatible with common pipe coatings 8. Excellent resistance to cathodic disbonding 9. Meets ASTM D 1000 Standard 10. Long term corrosion protection and mechanical resistance The tape consists of two layers, adhesive and film Inner layer: butyl rubber Outer layer: polyethylene Thickness: 0.35 - 1.30mm Width: 50-300mm Length: 30 - 200m Application 1 Rust Removal Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.2 PrimingPrimer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m². 3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

Pipeline Wrap tape The tape as consists of two parts: 1. Adhesive: Inner layer of Butyl rubber. 2. Backing: Outer layer of Polyethylene(PE) Plastic. Specification of tape: Inner wrap tape: T-140 (0.38mm), T-150 (0.51mm), T-165 (0.64mm), T-180 (0.76mm), T-1100 (1.02mm), T-1130 (1.27mm); Outer wrap tape: T-240 (0.38mm), T-250 (0.51mm), T-265 (0.64mm), T-280 (0.76mm), T-2100 (1.02mm), T-2130 (1.27mm); Joint wrap tape: T-365 (0.64mm), T-380 (0.76mm), T-3100 (1.02mm), T-3130 (1.27mm); Thickness:0.38mm-1.3mm, Width:50mm, 75mm, 100mm, 150mm, 230mm, 300mm Lengh: 30-300m Synthetic Primer: P19: Solid content 19%; P27: Solid content 27%. Mastic filler:: N99: Solid content 99 packing in carton

Place of origin: shandong, china (mainland) brand name: xunda tape model number: t100 Material: polyethylene adhesive: butyl rubber color: black yellow white Design printing:: no printing usage: anti-corrosion for pipe use:: oil water gas pipeline Same band: alta /polyken/ denso adhesive type:: pressure sensitive place of origin:: shandong china (mainland) adhesive side: single sided packaging & delivery Packaging details:320mm*320mm*820mm 1 roll Delivery detail:5 days Item name, inner wrap tape polyethylene tapes, pipe wrap polyethylene tapes, Aluminum tape, polyethylene adhesive tape, butyl rubber adhesive tape Size of products, 1roll/set , 200ft*150mm, 100ft*100mm Material, butyl rubber bituminous compound and adhesion promoting resins Structure, 2 layers without primer, pe + adhesive Product color, white, black, yellow, grey Packing, shrink wrap+2pcs color labels(color labels can print customer logo) Package, 4, 6, 12, 24 sets/ carton Moq, 500 roll Samples lead time, within 7 days Payment term, 30% deposit, the balance against copy of shipping documents Trading term, fobguangzhou/fobshenzhen/fobshanghai/cit Delivery date, within 10days after confirm your po. Usage:, it can be use on gas , oil, water pipeline polyethylene, underground overhead Excellent adhesion to inner-layer tape and self resistant to uv Provides long-term corrosion protection to steel pipelines. Repair of damaged factory applied corrosion protection. Outlining weld beads and cut backs prior to wrapping bare-welded joints. Outlining seams on spiral and seam welded pipe. 320mm*320mm*820mm 1 roll

Pipe Wrap, Joint Coatings & Accessory Products Xunda carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities. Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe. Coating repair: cold-applied tape products for plant and field repair of main line coating systems. Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe. Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints. ROW construction: Rockshield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor. Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Xunda has the tape coating for the job. packing in carton

Supplier: Anti corrosive tape for underground pipelines

Self adhesive bitumen waterproof tape aluminum foil tape 1 description: Aluminum foil tape, flashing tape, peel/stick roof tape, shelf adhesive bitumen tape, waterproof tape, sealing tape has a heavy aluminum facing or pe together with extra thick rubberized asphalt based adhesive system. Roof waterproof tape is recommended for most types of roofs, windows and flashing problems including: Trailers Rv's Mobile homes Industrial buildings Roof awnings Truck trailers Chimney flashing Roof to wall flashing Ridge flashing Window frames of glass, metal, plastic Wood including osb Clay and cement roof tiles 2. Structure The specification of the tape consists of three layers. Film backing: aluminum foil or polyethylene Adhesive: polymer modified asphalt and butyl rubber Interleaf: antiadhesive film treated with silicone 3. Features: Aluminum backing is more moldable - it conforms better to irregular surface features - for weather-tight seals Excellent for flashing No messy sealant Stays flexible Aggressive grip Superior adhesion Assure immediate leakproof results Easy, fast application No harmful voc’s Ideal adhesive/sealant thickness

Xunda anti corrosive tape for underground pipe wrap tape Xunda tape is mainly engaged in five series of products, which are inner tape, outer tape, joint tape, tape primer, and putty codd categories in nearly 100 specifications. They can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc. 1.1 inner tape: (anticorrosion tape, anti corrosion tape, anticorrosive tape) is for anticorrosion of underground, underwater, & overhead pipelines. 1.2 outer tape: (protection tape, protective tape) is for protection of pipe and the surface of inner tape from damages. 1.3 joint tape: (polyethylene tape, polyethylene tapes, pe tape, rubber tape, butyl tape, butyl rubber tape) is for anticorrosion of field joints, fittings, & specifically piping. Component: backing: polyethylene pe & adhesive: butyl rubber Thickness: 0.38mm to 1.27mm, Width: 50mm to 300mm Length: 30 to 300m 1.4 tape primer: (synthetic primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape. P19: solid content 19%; P27: solid content 27%.

Polyethylene Pipelines Cold Applied Tape Composition: It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue. Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation Thickness: 0.30 - 1.30mm Width: 50, 75, 100, 150, 230, 300mm Length: 30 - 200m Features: Excellent adhesion to pipe and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets ASTM D 1000 Standard Cold applied Application: Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness. Irregular surfaces such as valves, flanges, etc. packing in carton