SiO2, % 79,01
LOI (at 550 0C) 12,8
Moisture % (at 105 0C) 53,2
Al, % 2
F (total), % (in dry) 10,4
pH (25 %solution) 2,3
Angle of repose, 19
Supiltinis svoris, t/m3 (supur�ius)/(by shaking) 0,825
Supiltinis svoris, t/m3 (nepur�ius)(by filling) 0,552
Silicone Dioxide Amorphous is used as filler in rubber products paints animal feeds and insulation materials Its used in printing inks varnishes and in the production of cement and refractory material its used as a precursor in the production of glass and silicon Silicone Dioxide Amorphous is used in sand casting in the production electronic components and works as a component in defoamer Its also used as a sizing agent for the textile industry Sales Specifications Appearance White powder SiO2996 Moisture 009 Loss on ignition 006 Fe2O3001 AI2O3016 Na ppm5 CI ppm5 Density gcm3265 pH7 Whiteness92 Packing 5512 lb bag 40 bags per pallet
Silicon dioxide, often referred to as silica, is a naturally occurring compound composed of silicon and oxygen atoms (SiO2). It is one of the most abundant minerals on Earth and exists in various forms, including quartz, sand, and glass. Silicon dioxide is a versatile material with applications spanning multiple industries. In the electronics industry, it is used as an insulator and substrate in semiconductor devices. In construction, it is a key component in concrete and building materials. It is also employed in the production of glass, ceramics, and abrasives. Additionally, silicon dioxide has applications in the food and pharmaceutical industries as an anti-caking agent and flow aid. Its wide availability and diverse properties make silicon dioxide an indispensable material in numerous industrial and consumer applications.
Supplier: Remelted zinc ingots, pwg zinc ingots, zinc dross, zinc ash, zinc oxide, lead dross, magnesium ingots, all grades, silicon metal, lead ore/ concentrate, zinc concentrate/sulphide
Buyer: Zinc dross, zinc ash or skimming from hot dip galvanizing process, zinc fines, zinc die cast scraps, lead dross, brass and copper scraps
Silicon Dioxide, E551, CAS no.7631-86-9, white powder. Silicon dioxide (SiO2), also known as silica, is a natural compound made of two of the earth's most abundant materials: silicon (Si) and oxygen (O2). Silicon Dioxide is a common additive in the production of foods, where it is used primarily as a flow agent in powdered foods, or to absorb water in hygroscopic applications used in silica gel, control moisture levels to avoid prevent certain goods from going bad. It is often used in cheese, fat spreads, confectionery, dried vegetables, etc. As an experienced Silicon Dioxide manufacturer and supplier, we has been supplying and exporting Silicon Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Silicon Dioxide Specification Item Standard Appearance White powder Purity (SiO2, %) 96 Oil absorption (cm3/g) 2.0~ 3.0 Loss on drying (%) 4.0~ 8.0 Loss on ignition (%) 8.5 BET (m2/g) 170~ 240 pH (10% solution) 5.0~ 8.0 Sodium sulfate (as Na2SO4, %) 1.0 Arsenic (As) 3mg/kg Lead (Pb) 5 mg/kg Cadium (Cd) 1 mg/kg Mercury (Hg) 1 mg/kg Total heavy metals (as Pb) 20 mg/kg Total plate count 500cfu/g Salmonella spp./ 10g Negative Escherichia coli/ 5g Negative
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Titanium dioxide is a white, odorless, and naturally occurring mineral compound that finds extensive use in various industries. It is most notably recognized as a white pigment in paints, coatings, plastics, and cosmetics due to its exceptional opacity and brightness. Titanium dioxide serves as an effective UV blocker in sunscreens, protecting the skin from harmful ultraviolet rays. In addition to its role in pigmentation and UV protection, it is employed as a catalyst in the chemical industry, and as a strengthening and opacifying agent in the food industry for items like confectionery, sauces, and toothpaste. Its versatility and ability to enhance color, protection, and strength make titanium dioxide an indispensable component in a wide range of everyday products.
Titanium Dioxide, E171, CAS No.13463-67-7, is a naturally occurring oxide of titanium, available as white powder. the naturally occurring oxide of titanium. It appears as a white powder and is often used as food coloring in cheese products, processed fruit, fat spreads, candy, etc. When used as a pigment, it is called titanium white. As an experienced Titanium Dioxide manufacturer and supplier, we has been supplying and exporting Titanium Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Titanium Dioxide Specification ITEM STANDARD CHARACTERISTICS WHITE POWDER IDENTIFICATION D.PALE YELLOWISH COLOR AT HEATINGE. ORANGE-RED COLOR WITH H2O2F. VIOLET-BLUE COLOR WITH ZINC LOSS ON DRYING 0.23% LOSS ON IGNITION 0.18% WATER SOLUBLE SUBSTANCE 0.36% ACID SOLUBLE SUBSTANCE 0.37% LEAD 10PPM MAX ARSENIC 3PPM MAX ANTIMONY
Supplier: Vanadyl sulfate, vanadium pentoxide, vanadium trioxide, sodium metavanadate, potassium metavanadate, ammonium metavanadate, vanadium electrolyte, nano titanium dioxide
TiO2 rutile feature CAS# :13463-67-7 Property: 1.The product has the property of antibacterial, anti-aging and protection from UVR (ultraviolet radiation), and greatly improve adhesive power of products. 2.the product is nonpoisonous and harmless, and has a good compatibility with other materials. 3.The product has uniform particle size, big surface area, good dispersion and transparency,and has good property of anti-UV. 4.As a new material,titanium dioxide can be widely used on,electronic,battery, etc.