Mud Pump Module

Oee offers a full line of pistons for duplex and triplex mud pumps. All api types are available. Among these are: 1. Bonded rubber pistons 2. Premium bonded urethane pistons 3. Pistons with replacement rubbers Bonded rubber pistons are fully interchangeable with other api standard desig0ned pistons and delivery maximum performance in almost all drilling conditions. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other api designed pistons make our premium piston a sound value. Bonded urethane pistons have no joints to leak. But eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes. This fail-safe piston seals off to greater diameter as liner wears. Premium bonded urethane pistons apply in standard environment with the longest service life of more than 500 hours, and piston hub has the longest service life of more than 450 hours. Pistons with replacement rubbers will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This one piece bonded unit provides the same series of advantages, being impervious to oil and other chemicals.

Oee supplies power end parts such as crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps: Emsco:f-500, f-800, f-1000, f-1300, f-1600 National oilwell::8-p-80, 9-p-100, 10-p-130, 12-p-160 Gardner denver:pz-8, pz-9. The products quality is in accordance with the stipulation of api (american petroleum institute).Oeeí»s high quality products perform excellent under high pressure, high temperature, and corrosion. Oeeí»s product equipments conform to the requirement of api as well, the processing of products is reasonable and effective. Crosshead and crosshead guide are made of astm a48-83 meehanite featuring good abrasion resistance and long service life. Pinion shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.

Mud Pump Pistons are made of high hardness alloy steel, and they are wear-resistant, anti-corrosive and anti-distortion after heat treatment. The seal of the piston can be made of polyurethane, polyether material and it can be also made of thiakol rubber. Type: Bonded pistons, Replaceable pistons Material of piston hub: forged by 45# steel or 40Cr with hardening and tempering Material of piston cup: urethane NBR rubber Surface treatment of piston hub: by phosphating and by Oxidizing Size: 3 ~ 8 in Brand: NATIONAL, GD, EMSCO, OILWELL, IDECO, DRILLMEC, WEATHERFORD, BOMCO, TSC, EWCO, AMERICAN BLOCK, EWECO, HONGHUA, LS NOV, WIRTH, RONGSHENG

BOLU manufactures Urethane Bonded Pistons and Replaceable Rubber Pistons. BOLU also supplies replaceable rubber kit and piston hubs. All our piston products are exchangeable with OEM products and meet or exceed API-7K standards. Urethane Bonded Pistons Bonded with premium urethane Optional regular type & high temperature type Excellent performance in extreme environment Exchangeable with OEM products Meet or exceed API-7K standards

BOLU manufactures Urethane Bonded Pistons and Replaceable Rubber Pistons. BOLU also supplies replaceable rubber kit and piston hubs. All our piston products are exchangeable with OEM products and meet or exceed API-7K standards. Urethane Bonded Pistons Bonded with premium urethane Optional regular type & high temperature type Excellent performance in extreme environment Exchangeable with OEM products Meet or exceed API-7K standards For more details, please feel free to tell us. Established in 1998, Botou Bolu Petroleum Machinery Factory is a professional manufacturer & supplier of mud pumps & parts. Bolu Petroleum can offer a full line of mud pumps & parts together with casing heads, drilling pipe join tools, TDB hydraulic profile control water plugging pump & parts , X-trees and many other oilfield drilling tools. Bolu Petroleum has been granted the API certification. Products are exported to America ,Middle East, etc. Bolu Petroleum is looking forward to being partners with you around the world.

BOLU manufactures Urethane Bonded Pistons and Replaceable Rubber Pistons. BOLU also supplies replaceable rubber kit and piston hubs. All our piston products are exchangeable with OEM products and meet or exceed API-7K standards. Replaceable Rubber Pistons Replaceable rubber kit equals operation cost saving Extended service life Excellent performance in extreme environment Exchangeable with OEM products Meet or exceed API-7K standards For more details, please feel free to tell us. Established in 1998, Botou Bolu Petroleum Machinery Factory is a professional manufacturer & supplier of mud pumps & parts. Bolu Petroleum can offer a full line of mud pumps & parts together with casing heads, drilling pipe join tools, TDB hydraulic profile control water plugging pump & parts , X-trees and many other oilfield drilling tools. Bolu Petroleum has been granted the API certification. Products are exported to America ,Middle East, etc. Bolu Petroleum is looking forward to being partners with you around the world.

Bolu manufactures oem parts for all major mud pumps. All products are exchangeable with oem products and meet or exceed api-7k standards. Main pump brand & model National: 7p-50, 8p-80, 9p-100, 10p-130, 12p-160, 14p-220 Emsco: f-350/500/650/800/1000 fb-1300/1600 Ideco: t-500/800/1000/1300/1600 Gardner denver: pah, pz-7/8/9/10/11 Oilwell: a-850-pt a-1100-pt a-1400-pt a-1700-pt 3nb-1300c/3nb-1600/sl3nb-1300a/sl3nb-1600a/3nb-500/3nb-1000 Tsm1600/tsm750-440/400 For more details, please feel free to tell us. Established in 1998, botou bolu petroleum machinery factory is a professional manufacturer & supplier of mud pumps & parts. Bolu petroleum can offer a full line of mud pumps & parts together with casing heads, drilling pipe join tools, tdb hydraulic profile control water plugging pump & parts , x-trees and many other oilfield drilling tools. Bolu petroleum has been granted the api certification. Products are exported to america , middle east, etc. Bolu petroleum is looking forward to being partners with you around the world.

Supplier: Mud pump whole set, modules, liners, pistons, valve and seats, flanges, extended rods, piston rods, crosshead, clamps, rotary slips, safety clamps, drill collar slips, casing slips, and elevators, drilling rig parts, drill bit

Normal Standard All pistons are produced by imported acrylonitrile butadiene rubber which suit for ordinary drilling environment under the maximum working pressure 20MPa. The maximum working temperature of our piston is up to 120 íµ and it is with excellent wear resistance and good chemical corrosion resistant .The service life of the piston can reach 280 hours in ordinary drilling working environment. Strength Enhanced The material of this kind of pistons is high-intensity acrylonitrile butadiene rubber which supplied by American Dupont company and Japanese Zeon company. This kind of pistons is with good oil and wear resistance as well as super comprehensive strength, which applied to oil-based mud and higher silt content working environment under the maximum working pressure 35MPa as well as at the maximum working temperature 120íµ Normal Standard All pistons are produced by imported acrylonitrile butadiene rubber which suit for ordinary drilling environment under the maximum working pressure 20MPa. The maximum working temperature of our piston is up to 120 íµ and it is with excellent wear resistance and good chemical corrosion resistant .The service life of the piston can reach 280 hours in ordinary drilling working environment. Strength Enhanced The material of this kind of pistons is high-intensity acrylonitrile butadiene rubber which supplied by American Dupont company and Japanese Zeon company. This kind of pistons is with good oil and wear resistance as well as super comprehensive strength, which applied to oil-based mud and higher silt content working environment under the maximum working pressure 35MPa as well as at the maximum working temperature 120íµ