High speed daf
High speed diffused air flotation
Dispersed air flotation
Significant advantage
Turbidity can be reduced to 0.5ntu
Algae and oil removal rate over 95%
Automatic discharge sludge
Concentration 2~4%
Water loss rate less than 1.5%
Seperation speed over 30m/h
Air dissolution rate 27%
Ion bubble diameter 3~7m
Polymer dosage can be reduced 30%-50%, which is from the using of matrix water distribution technology and high speed coagulation reactor.
High speed dissolved air flotation system, daf sludge dewatering, �manufacturer, factory
Why choose
Highly effective to remove low density granules (such as algae, suspended oil, suspended solids, etc.)
Clarified water by dissolved air and micro bubble manufacturing technology (patent technology).
Ultra surface loading capacity, less land need, intelligente operation.
Instant power on and off
Application fields
Low temperature, high turbidity (peak value>500ntu) high algae salt concentration seawater.
Pre-treatment, advanced treatment and raise standards upgrade project for municipal waste water.
River black smelly water, reservoir water, tap water, lake water and algae containing water etc.
High speed dissolved air flotation is used in low temperature, high turbidity (peak value>500ntu) high algae salt concentration seawater.
Supplier: Alkaline water ionizer, filter, water dispenser, carbon block filter, water treatment, home appliance, small electronics, kitchenware, electronics, water purifier, electric water purifier, electric water dispenser, hydrigen water
Services: Logistics, shipping, consulting on alkaline water treatment
High speed daf High speed diffused air flotation Dispersed air flotation Significant advantage Turbidity can be reduced to 0.5ntu Algae and oil removal rate over 95% Automatic discharge sludge Concentration 2~4% Water loss rate less than 1.5% Seperation speed over 30m/h Air dissolution rate 27% Ion bubble diameter 3~7m Polymer dosage can be reduced 30%-50%, which is from the using of matrix water distribution technology and high speed coagulation reactor. High speed dissolved air flotation system, daf sludge dewatering�manufacturer, factory Why choose Highly effective to remove low density granules (such as algae, suspended oil, suspended solids, etc.) Clarified water by dissolved air and micro bubble manufacturing technology (patent technology). Ultra surface loading capacity, less land need, intelligente operation. Instant power on and off Application fields Low temperature, high turbidity (peak value>500ntu) high algae salt concentration seawater. Pre-treatment, advanced treatment and raise standards upgrade project for municipal waste water. River black smelly water, reservoir water, tap water, lake water and algae containing water etc. High speed dissolved air flotation is used in low temperature, high turbidity (peak value>500ntu) high algae salt concentration seawater.
Nd fiber recycling, printing and dyeing wastewater treatment, electroplating, etc with heavy metal ions wastewater treatment, oily wastewater treatment, tannery wastewater treatment, chemical wastewater treatment, paint wastewater treatment, food waste water treatment, the biological treatment of mud and water separation, low turbidity water treatment, including algae surface water treatment, and a variety of other wastewater solid, liquid separation etc. 2.5x1.5x2.0m, 850kgs
High-efficiency Compressed Air Condenser (water-cooling) Inlet pressure: 0.2~1.0Mpa Inlet temperature: 140 celsius degree Outlet temperature: 45 celsius degree Cooling water inlet temperature: 32 celsius degree Cooling water inlet pressure: 0.2~0.4Mpa
63 MM OD X 610 mm long 63 mm OD X 1000 mm long 90 mm OD X 1000 mm long. 1000 mm long x 350mm height x 350 mm breadth.
The unit technology uses extremely small air bubbles to lift suspended solids and oil to the top surface. The formed sludge layer is scraped into a sludge holding tank. The addition of coagulation and flocculation chemicals may be required to enhance the performance. Removal efficiency is usually superior to gravity bases systems and often applied as polishing step (downstream of CPI) The unit can be supplied with a gas-tight cover, coagulation & flocculation dosing and mixing equipment and air-saturation by special pumps or in separate pressure vessel. Flotation consists of separating solids from the water phase by attaching the solids to fine air bubbles to decrease the densityof the particles which float instead of sinking. The rising solids are called the and are skimmed off the surface and further processed in the sludge train.Chemicals can be added to improve the separation: first for coagulation and then for flocculation. The type of flotation used by Dissolved Air Flotation in which the suspension is saturated with air at high pressure. Bubbles are released to the water and will attach to the suspended solids.The bubbles from a system are much smaller than in other types of flotation systems and better adhere to the solids.This makes one of the most efficient flotation options of wastewater treatment.
In industrial water treatment, complex compounds, a high nutrient amount and various process chemicals force us to understand the individual processes and circumstances. Lamor exploits its team of global experts to solve these puzzles together with our clients.
Fully automated operations with datalogging, remote access and control Surface water or ground water application. Flow rate 10 m3/h raw water feed Weight Shipping: 2600 pound Operating: 5900 pound Dimensions 5.14 ft W x 11 ft L x 9.18 ft H Model Type Megacell Horizontal MCH-1 Frame material Wetted parts: SS316 Non-wetted parts: SS304 Power 230V, 3PH, 60 Hz, 40 Amps, NEMA 4
Fully automated operations with datalogging, remote access and control Surface water or ground water application. Flow rate 10 m3/h raw water feed Weight Shipping: 2600 pound Operating: 5900 pound Dimensions 5.14 ft W x 11 ft L x 9.18 ft H Model Type Megacell Horizontal MCH-1 Frame material Wetted parts: SS316 Non-wetted parts: SS304 Power 230V, 3PH, 60 Hz, 40 Amps, NEMA 4
