Oil tester
Ijj (d)-80 series insulating oils dielectric strength automatic tester is a new generation full automatization bdv testing instrument developed on the basis of the hcj-9905a model, which is designed according to the international standard iec-156 and national standard gb507-86 (insulating oils- determination of the dielectric strength) requirements, and meet the various usersf+ feedback and opinions.
Using setting firstly, start up testing secondly method, it is adopted scm as the leading, the whole testing procedure automatically run and controlled by the microcomputer. It is simply operated and convenient used.
Insulation Oil Tester for Series HJT (test oil breakdown voltage dielectric strength) Transformer Oil Tester Insulation Oil Tester for Series HJT (test oil breakdown voltage dielectric strength) ? Introduction IIJ series fully automatic oil tester is apply to test the insulating oil's dielectric strength, which is designed as per the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. The automatic oil tester adopt industrial SCM to control, which is applied to integrate circuit, new model I/0 connection, particular testing and anti-jamming technology which largely improve the machines capacity . Main features: 1.Simple operation, automatically (can be finished just press on key) 2.Menu controlled. Input data can clear 3.Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4.System time can go on running under power off; (The system time just for reference can not be the standard of timing) 5.Can upgrade software through RS232 6.High capacity of anti-jamming and high precision of testing. 7.Small volume, light which operated in the open air very conveniently. 8.The set shall be provided with smooth and continuous of output voltage between zero and maximum having no distortion of waveform. 9.Audio sound and visual signal will indicate at the instant of sample failure. ?¡ Technology and parameter data 1.Power Supply: 220 ±10% VAC, 50HZ 2.Output: 60 kV,70KV, 80 kV, 100 kV 3.Capacity: 1.2 kVA (for 60kV), 1.6 kVA (for 80 kV), 2.0 kVA (for 100 kV) 4.Pressure increase rate: About 2 KVA/S 5.Pressure testing speed: 3% 6.Break down sensitivity :
The model thy-21ce installs a large lcd screen display english characters of each function, convenient to read various data.A micro printer can print the test result for saving data.The analyzer has a dual function of dc and ac, in no man operation will shut down automatically;when ac power work can charge. Main functions: 1.Rapid test water percentage and contaminants of lube oil within 3 minutes; 2.Detecting whether have metal particles in lube oil beyond 60 micron. 3.Determining the new purchased lubricant is qualified or not. 4.Printing the result after finishing the detecting.
Fully automatic oil tester - iij series This oil tester could testing the voltage of the insulating oil.
Product Description The model THY-23A is a portable and intelligent oil quality analyzer.The product can be normally used with Li battery under the system of data processing,low voltage and low power consumption.A 2.8-inch color screen shows operating prompt in English characters of each function that convenient to read various data.Automatic calibration of the analyzer greatly improve the testing efficiency,the analyzer will shut down automatically in no man operation state.Hand- held design is convenient for on-site and wild field use. Main Functions Rapid test oil contaminant, water content in 10 seconds Detecting whether have metal particles in lube oil beyond 60�¯�¿�½?�?�¼m Determining the new purchased lubricant is qualified or not Product Advantages: Connect with PC for querying date. 300 types of oil data in world market for reference. Automatically save oil data with 4GB ROM. Automatically form the oil curves with test result. Rechargeable Li Battery
The THY-22A intelligent oil quality analyzer, adopts low voltage, micro power consumption, signal conditioning and data-processing system, which can be used for a long time powered by the dry battery; The LCD large screen display can be contribute to enable us read measurement datas clearly; The automatic 0-adjusting function improves the testing efficiency; The instrument is more suitable for site work and field work by adopting small size volume and portable design. Main functions: 1.Determining the degree of contaminate in lubricants with in 3 min 2.Detecting metal particles beyond 60m 3.Determining whether the newly purchased lubricant is qualified
Zn bdv fully automatic transformer oil tester Iij fully automatic tester is designed by iec156 dielectric strength of insulating oil. Adopt industrial scm to control, which is applied to integrate circuit, new model i / 0 connection, particular testing and anti-jamming technology which largely improve the machine's capacity. Features: 1.Simple operation, automatically (can be finished just press on key) 2.Menu controlled. Input data can clear 3.Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4.System time can go on running under power off; (the system time just for reference can not be the standard of timing) 5.Can upgrade software through rs232 6.High capacity of anti-jamming and high precision of testing. 7.Small volume, light which operated in the open air very conveniently. - Packed in wooden case
Scope Total precipitate residual fuel oil tester, according to sh / t0701 and sh / t0702 "residual fuel oil precipitate total assay (aging, hot filtration)" standard design and manufacturing. This method is applicable to the determination of 100 ? viscosity of less than 55mm2 / s of residual fuel oil and residue containing components reconciling get distillate fuel oil in total deposits. Features 1, the petrochemical sh / t0701 and sh / t0702 two instruments integrated into one instrument, aging and hot filtration, using a single instrument completed. 2, the instrument uses imported glass fiber filter, filter weighing accuracy is poor. 3, can simultaneously detect two samples, but also do parallel test, easy to operate. 4, the use of digital temperature controller, temperature control accuracy up to ± 0.5 ?, the temperature display and intuitive, accurate readings. 5, time use digital timer, time up 99h99m99s. 6, vacuum up 40kpa ± 2 kpa, vacuum degree of precision by the gauge display, precision vacuum pressure regulating valve 7, aging bath molding metal bath, safety, environmental protection, do sample unit to operate two holes. 8, the instrument uses metal bath replacement steam generators, the operation more secure, convenient and environmentally friendly. Technical parameters 1, the applicable standards: sh / t0701 2, the working environment: relative temperature: 0 ~ 45 ? 3, humidity: =80% 4, temperature: digital pid temperature controller 5. Timing: digital timer 6, temperature range: room temperature ~ 100 ? 7, temperature control accuracy: ± 0.5 ? 8, vacuum pressure: precision gauge shows 9, the working mode: two units 10, total power: 2000w 11, working power; ac220v ± 10% 50hz
Transformer Oil Dielectric Strength Tester Transformer Oil Tester HJT Transformer oil tester conforms to international standard IEC-156, can be used for power frequency dielectric break down test on the transformer oil, capacitor oil, electric device, insulation tool, electric manufacturer and etc. It??s widely used in the fields of power system, petroleum, chemical industry, railway station, power station, electric manufacturer and etc. Features: 1.Self detecting function. The regulator could return to zero start automatically. 2.Controlled by micro computer, easy to operate. 3.Build-in printer. 4.Automatic magnetic bar stir, to eliminate uneven and bubble of oil. 5.100 test data storage, can display the ambient temperature and humidity. 6.Over voltage, over current, limitation protection functions, to ensure the safety of operators. 6.RS232 interface. Specification: Power supply: AC 220V ±10%, 50 Hz ±5% Test voltage: : AC 0 80KV 0-100kV at option Limitation current: 5mA Test precision: 1% Voltage boosting rate: 0.5-5KV/s (adjustable) Presetting: 1-9 times Stirring time: 0-1 minute 9 seconds Static time: 0-10 minutes 39 seconds Environmental temperature: 0-35 Relative humidity: 75%RH Power: 300VA Electrodes Gap Size: 2.5mm Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
The transformer oil bdv tester unit is for automatically testing the breadkown voltage or dielectric strength of the insulation oil upto 60kv or 80kv or 100kv. Wooden case