This buyer is located in north sudan. The final product of this plant is used for steel plant. Shaft kiln is taken for it and the production capacity is 100tpd.
Screen plate details according to the buyers requirement:
Fuel: lpg and diesel
Raw material size: 300mm
Production capacity: 100tpd
Heat value of lpg: 11.500 kcal/kg.
Service provided to client during this process:
1. Initial design was provided according to the client
s requirement and then the contract was signed after the initial design is approved by the buyer.
2. After the down payment was available to our account, the final design was made and provided which was also agreed by the buyer.
3. All the equipment were put into production and good-quality product are ensured.
Through continuous communication, the trust from client was enjoyed by us. And our factory was also thought highly by client which contributed a lot to the contract signing.
This Buyer is located in North Sudan. The final product of this plant is used for steel plant. Shaft kiln is taken for it and the production capacity is 100TPD. Screen Plate details according to the buyerâ??s requirement: Fuel: LPG and Diesel Raw Material Size: 300mm Production Capacity: 100TPD Heat Value of LPG: 11.500 kcal/kg. Service provided to client during this process: 1. Initial Design was provided according to the clientâ??s requirement and then the contract was signed after the initial design is approved by the buyer. 2. After the down payment was available to our account, the final design was made and provided which was also agreed by the buyer. 3. All the equipment were put into production and good-quality product are ensured. Through continuous communication, the trust from client was enjoyed by us. And our factory was also thought highly by client which contributed a lot to the contract signing.
This Buyer is located in North Sudan. The final product of this plant is used for steel plant. Shaft kiln is taken for it and the production capacity is 100TPD. Screen Plate details according to the buyers requirement: Fuel:LPG and Diesel Raw Material Size:300mm Production Capacity:100TPD Heat Value of LPG:11.500 kcal/kg. Service provided to client during this process: 1.Initial Design was provided according to the clients requirement and then the contract was signed after the initial design is approved by the buyer. 2.After the down payment was available to our account, the final design was made and provided which was also agreed by the buyer. 3.All the equipment were put into production and good-quality product are ensured
Hydrated lime (calcium hydroxide) is a dry, colorless crystalline powder manufactured by treating calcium oxide (quicklime) with water, in a process called "slaking." Also known as slack lime, builders lime or pickling lime, hydrated lime is used in the production of mortars, plasters, cements, paints, hard rubber products, petrochemicals, and in the tanning of leather. A more recent development for hydrated lime use is in environmental applications. Here, hydrated lime, a mild alkali, is used for the removal of acid gases in coal-fired energy plants, cement mills, glassmakers and incinerators. However, the largest single use of hydrated lime remains steel manufacturing, where it is used to remove impurities. Hydrated lime is also used to produce other metals. In construction, the dominant use of hydrated lime is in soil stabilization for roads, earthen dams, airfields, and building foundations. Hydrated lime can be used to raise the pH of acidic soils. This is also referred to as soil "sweetening." the purity of our raw material is not less than 80%.
Specificationsjust 15 minuts, withour three- stage lime hydrator,transform quicklime into hydrated lime powder,and the moisture less than 1%. Our advantages: 1. Year of experience with lime and hydrating systems. 2. Research and Developed patent Dust Collector which especial for Lime dust 3. True understanding of process conditions. Choose best equipment for each customer. 4. Capable of installation anywhere around the world. 5. Control systems for entire facility. Flowchart: The crushed and weighed quicklime from the constant weight feeder enters the three-stage lime hydrator where water is mixed with the quicklime in the required proportions to achieve complete hydration. According to different process requirements, it is able to make serous fluid become different sized hydrated lime powder by the air separator. Principles and advantages of three-stage dry power hydrator : 1. Three stage reaction with water distribution The hierarchical & scientific distribution of water can make the calcium oxide to be fully pre-hydrated. After contacting with reasonable water in the first stage reaction chamber, the mixture enters into the second stage. This process is the best time for hydrating. When entering into the third one, hydrated lime is already semi-dry state. Three stage hydrator can finally make the calcium completely become the fluffy powder. And the entire reaction process just needs 8-15 minutes. 2.Time control: It will control the time of reacting water and calcium oxide, fully hydrating just needs 8-15 minutes 3. Insulation function: Hydrator has good insulation function. As we all know, temperature may influence the rate of chemical reaction. The unique design makes it possible to reuse the vast heat which generated from the reaction inside the hydrator. It will raise the inner temperature to 60 degrees by only 3-5 minutes and make the calcium oxide to be fully hydrated. 4 Feeding process control: To pour the needed materials into the first-stage reaction chamber, screw feeder plays a extremely vital use for preventing hot steam and dust flowing back into the screw feeder, otherwise that will affect the accuracy of sensor. 5. Remove dust to keep clean and healthy: This device, according to environmental requirements, equipped with our patent dust remove device, will solve the problem of the steam and dust pollution produced during hydrating ,so that ensure the clean of the environment and the health of workers. 6. Main uses of Lime hydrating system" 1. chemical lines:produce additive(hydrated lime) 2. Environmental: Flue Gas Desulfurization, Water and sewage treatment. 3. Lime plant: produce hydrated lime 4. Iron works: produce hydrated lime as flus for sintering Dust Collector : 1. widely use: To deal with the dust and harmful gases produced in the process of lime hydration of steel & Iron plants, power plants, chemical plants etc. 2. principles and features: It can meet the needs of a variety of processes. This equipment is adopted the atomization dust removal and the impact water filtration technologies, enable to deal with the dust and harmful gases produced in the process of lime hydration. That means the abandoned dust of quicklime can be recycled and there is no dust pollution at the scene environment. It will help burnt lime hydrator reasonably allocate water needed during the lime hydration. Different specification of lime hudrator will be choosed according the quicklime feeding amount of different enterprise to hydrate quicklime acdequately. 3. advantages: After the dust removal device and the lime hydrator forming a complete set, the lime hydration ratio can exceed 90%, the dust extraction ratio can reach 99%. Nude packing.
Our advantages: 1. Year of experience with lime and hydrating systems. 2. Research and Developed patent Dust Collector which especial for Lime dust 3. True understanding of process conditions. Choose best equipment for each customer. 4. Capable of installation anywhere around the world. 5. Control systems for entire facility. Flowchart: The crushed and weighed quicklime from the constant weight feeder enters the three-stage lime hydrator where water is mixed with the quicklime in the required proportions to achieve complete hydration. According to different process requirements, it is able to make serous fluid become different sized hydrated lime powder by the air separator. Principles and advantages of three-stage dry power hydrator: 1. Three stage reaction with water distribution The hierarchical & scientific distribution of water can make the calcium oxide to be fully pre-hydrated. After contacting with reasonable water in the first stage reaction chamber, the mixture enters into the second stage. This process is the best time for hydrating. When entering into the third one, hydrated lime is already semi-dry state. Three stage hydrator can finally make the calcium completely become the fluffy powder. And the entire reaction process just needs 8-15 minutes. 2. Time control It will control the time of reacting water and calcium oxide, fully hydrating just needs 8-15 minutes 3. Insulation function Hydrator has good insulation function. As we all know, temperature may influence the rate of chemical reaction. The unique design makes it possible to reuse the vast heat which generated from the reaction inside the hydrator. It will raise the inner temperature to 60 degrees by only 3-5 minutes and make the calcium oxide to be fully hydrated. 4 Feeding process control To pour the needed materials into the first-stage reaction chamber, screw feeder plays a extremely vital use for preventing hot steam and dust flowing back into the screw feeder, otherwise that will affect the accuracy of sensor. 5. Remove dust to keep clean and healthy This device, according to environmental requirements, equipped with our patent dust remove device, will solve the problem of the steam and dust pollution produced during hydrating ,so that ensure the clean of the environment and the health of workers. 6.Main uses of Lime hydrating system 1. Chemical lines:produce additive(hydrated lime) 2. Environmental: Flue Gas Desulfurization, Water and sewage treatment. 3. Lime plant: produce hydrated lime 4. Iron works: produce hydrated lime as flus for sintering Dust Collector 1.widely use: To deal with the dust and harmful gases produced in the process of lime hydration of steel & Iron plants, power plants, chemical plants etc. 2.principles and features: It can meet the needs of a variety of processes. This equipment is adopted the atomization dust removal and the impact water filtration technologies, enable to deal with the dust and harmful gases produced in the process of lime hydration. That means the abandoned dust of quicklime can be recycled and there is no dust pollution at the scene environment. It will help burnt lime hydrator reasonably allocate water needed during the lime hydration. Different specification of lime hudrator will be choosed according the quicklime feeding amount of different enterprise to hydrate quicklime acdequately. 3. Advantages: After the dust removal device and the lime hydrator forming a complete set, the lime hydration ratio can exceed 90%, the dust extraction ratio can reach 99%.
Calcium oxide We have the pleasure to introduce our company to you. Limetreat (M) Sdn Bhd, one of the leading Lime Products manufacturer and supplier in Malaysia. Limetreat (M) Sdn Bhd is a member of NSL Chemicals Group of companies with operations in 14 countries. Its clients are located over the world from Middle East to China, and from Europe to Central America. The Group is a public listed company in the Stock Exchange of Singapore. Our primary lines of businesses are Environmental Chemicals & Services and we are the leading supplier for Lime products like Lime Stone, Quicklime, Calcium Carbonate Powder, Hydrated Lime, Calcium Oxide Powder, Carbon Additives and Refractory Products. NCL Chemicals is certified to ISO9001:2000 Quality Management System & also ISO14001. Limetreat products are certified by SIRIM Malaysia. Lime, one of the most prolific and versatile chemicals in the world and suitable for most of the sectors like steel industry, water treatment, plastering, agriculture, soil stabilization, mining industry, ready mix concrete, pulp & paper industry, etc. The environmental chemicals are manufactured in Malaysia and Singapore plants. In water treatment, lime is used by many municipalities to improve water quality, especially for water softening and arsenic removal. Hydrated lime is also widely used to adjust the PH of water to prepare it for further treatment. Lime is also used to combat "red water" by neutralizing the acid water, thereby reducing corrosion of pipes and mains from acid water.
Hydrated lime Limetreat (m) sdn bhd is a member of nsl chemicals group of companies with operations in 14 countries. Its clients are located over the world from middle east to china, and from europe to central america. The group is a public listed company in the stock exchange of singapore. Our primary lines of businesses are environmental chemicals & services and we are the leading supplier for lime products like lime stone, quicklime, calcium carbonate powder, hydrated lime, calcium oxide powder, carbon additives and refractory products. Ncl chemicals is certified to iso9001:2000 quality management system & also iso14001. Limetreat products are certified by sirim malaysia. Lime, one of the most prolific and versatile chemicals in the world and suitable for most of the sectors like steel industry, water treatment, plastering, agriculture, soil stabilization, mining industry, ready mix concrete, pulp & paper industry, etc. The environmental chemicals are manufactured in malaysia and singapore plants. In water treatment, lime is used by many municipalities to improve water quality, especially for water softening and arsenic removal. Hydrated lime is also widely used to adjust the ph of water to prepare it for further treatment. Lime is also used to combat "red water" by neutralizing the acid water, thereby reducing corrosion of pipes and mains from acid water. 25 kg kraft paper bag or 1000 kg jumboo bag
Some quantities of LIME with the highest measurements are burn-processed through kiln furnaces and utilizing high standard Swiss Technology at Saudi Plant Quick. LIME is burned at an average temperature of (1,100�° C) until it loses carbon dioxide by (44%) of its weight, leaving behind Calcium Oxide (Quicklime); which can be used immediately or milled to different degrees of finesse according to the market requirements.
Description Marble Chips are metamorphic rocks formed by the alteration of limestone by heat and pressure. In its pure form, marble is a white stone with a crystalline and sugary appearance, consisting of calcium carbonate CaCO3. Usually, marble contains other minerals, including quartz, graphite, pyrite, and iron oxides. It is used for its chemical properties in pharmaceuticals and agriculture. It is used for its optical properties in cosmetics, paint, and paper. They are used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Abrasives. Marble is usually a light-colored rock. It is one of the most effective acid-neutralization materials. Being composed of calcite, marble has a hardness of three on the Mohs hardness scale. As a result, marble is easy to carve, and that makes it useful for producing sculptures and ornamental objects. After being sanded with progressively finer abrasives, marble can be polished to a high luster. This allows attractive pieces of marble to be cut, polished, and used as floor tiles, architectural panels, facing stone, window sills, stair treads, columns, and many other pieces of decorative stone. Marble chips work best when used in paths and patios as a substitute for gravel. Although gravel often is used as inorganic mulch around plants, marble chip mulch's reflected sunlight can be too intense for plants in full-sun locations. Today, marble is quarried all around the world and is used to create giant monuments, it is used in building, even down to applications as simple as kitchen counter tops. Itâ??s classified as a metamorphic stone, which means that it has changed composition over time from one type of rock to another. Also used in: Building Stone Countertops and sinks Floor tiles Terrazzo marble chips mixed with concrete to form floors. Tomb Stone