2-wire DC24V Conventional Manual Call Point Broken Glass Button Push Button
The conventional manual call point designed for
conventional fire alarm system for reporting fire or
emergency condition by pull down the plate. The
manual call point can be reset by a special key
without breaking the glass.
Features
1. Compatible with all the conventional fire alarm control panel
2. Can be reset by key without use a new glass
3. 470 Ohm resistance
4. Easy surface mounting Base included
Specifications
Operating Voltage Range: 9 to 28VDC Volts
Alarm Resistance 470ohm/1W
Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range: -10C to 50C (14F to 122F)
Dimensions: Length 140mm, Width 105mm, Depth 45mm
Weight: Net Weight 220g
The 660 manual call points includes a pressure-activated displacement element to provide a safe and convenient Way for building occupants to manually initiate a fire alarm condition. Resetting the manual call point is achieved by inserting a key through the underside of the unit to replace the Operating face to the quiescent position. Pressure activated displacement element provides a safe user experience Integral indicator to show polling and alarm activation Resettable with simple key operation Suitable for indoor use Monitors for quiescent, alarm and fault conditions Dip switch address setting 125 usable detector address settings per loop
2-wire DC powered Conventional Manual Call Point Push Button The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its button latches. The call point has one 300 ohm resistor is used on the PCB board between Zone+ and Zone- or one relay contact (NO, COM, NC ) output when the button is pressed. Specifications: Operating Voltage Range: 9�32VDC Volts Nominal Operating Resistance: 300Ω Relay Contact Ratings: 2A/30VDC Operating Humidity Range: 95% RH, Non-condensing Operating Temperature Range: -10C to 50C (14F to 122F) Dimensions: W89mm ,H93mm, D26mm Base Dimensions: W87mm ,H87mm, D31.5mm Weight: Net Weight 125g (with base) Colour/Case Material: Red/ ABS
The 460 manual call points includes a pressure-activated displacement element to provide a safe and convenient Way for building occupants to manually initiate a fire alarm condition. Resetting the manual call point is achieved by inserting a key through the underside of the unit to replace the Operating face to the quiescent position. Pressure activated displacement element provides a safe user experience Integral indicator to show polling and alarm activation Resettable with simple key operation Suitable for indoor use Monitors for quiescent, alarm and fault conditions
Product Introduction:This product named Manual Call Point,,is usually referred to as an MCP within the fire protection industry, as a "Fire Alarm Call Point" in US, or as a "break glass" in the UK. They are used to allow building occupantsto signal that a fire or other emergency exists within the building. They are usually connected to a central fire alarm panel which is in turn connected to an alarm system in the building, and often to a local fire brigadedispatcher as well.Manual call point is used to initiate an alarm signal.Break glass at the time ofthe fire to issue a signal to a fire alarm control panel,the control panel will showing the serial number of the call point or the location and send out alarm sound once it received the signal. It can be manual alarm systemor part of automatic alarm system. In the case of fire when the glass cover is broken, the push button will be released by the spring action and will actuate an alarm at the control panel through its switching contacts. Inaddition to this, there will be an LED indicator on the control panel for visual indication to locate the call point easily.Product Parameter:Product nameManual Call PointBrand nameYIXINModelYX-BP560TypeGlass breakOperating voltage12-220VDCOperating current5AWithstood-voltage250VACContact modeNO/NCPoleSingle/Double pole optionalCoverWith water-proof cover optionalColorRed/Green/Yellow/Blue/White optionalBreaked materialGlass sheet(Plastic film on glass)Dimension87*87*52mmWarranty1 YearProduct Feature:1.Available for flush or surface mounting2.Test key inserted from side to test after installation.3.Use plastic film on glass sheet avoid splash of broken pieces and hurt.4.Surface technology: fireproof material, dull polish5.Standard structure: fireproof material shell, easy to install. 6.Suitable for the majority of conventional fire alarm systems.
The NFS-3030 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in small to medium-sized fire protection systems and provides effective fire detection and alarm notification. The NFS-3030 features a compact design and advanced microprocessor technology, making it easy to install and program. The control panel supports up to 384 points and includes built-in communication options, such as analog dialer and network interfaces, for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, providing versatility and customization for specific fire protection needs. The NFS-3030 is a cost-effective and reliable fire alarm control panel from Notifier.
The NFS2-640 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in medium to large-scale fire protection systems and provides reliable fire detection and alarm notification. The NFS2-640 features a compact design and advanced microprocessor technology, allowing for easy installation and programming. The control panel supports up to 640 points and includes built-in networking capabilities for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, offering flexibility and customization for specific fire protection needs. The NFS2-640 is a feature-rich and reliable fire alarm control panel from Notifier.
Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy. Features & Benefits: Multi-Criteria/Multi-Sensor smoke detection Unique ability to detect major elements of a fire Highest nuisance alarm immunity Advanced algorithms interpret and respond to multiple inputs
Product Introduction:This product named Manual Call Point,Website:,also called emergency door release button or manual pull button.1.Fire--When there is a fire,pull button to issue a signal to a fire alarm control panel,the control panel will showing the serial number of the call point or the location and send out alarm sound, once it received the signal.Access control--When there are chaos or emergency surround you,pull the call point to open the corresponding safety, door.2.Applicable type: safety, door, escape door, safety systemTechnical Parameters:Product nameManual Call PointBrandYIXINModelYX-BP562TypeGlass breakOperating voltage12-220VDCOperating current5AWithstood-voltage250VACContact modeNO/NCPoleSingle/Double pole optionalColorRed/Green/Yellow/Blue/White optionalCoverWith water-proof cover optionalDimension91*87*55mmWarranty1 YearProduct, Feature, :1.Key reset manual call point use plastic sheet which can reused and reset.2.It takes just a few seconds to reset the call point by Special key after pull.3.The manual call point can use its own, bottom case surface mounted or recessed mounted,easy to install.
Product introduce:1. When the accident happens, press the plastic elements to alarm or open the door. Plastic elements had printing a indication.2. There are four colors, red, yellow, white, green.* The red used for FIRE fighting.* The white and green can be used for the access control system, emergency safety door.* The yellow is generally a warning function and an emergency rescue for natural disasters.Specifications:Product nameManual Call Point,Emergency door releaseBrand nameYIXINModelYX-BP560STypeGlass breakOperating voltage12-220VDCOperating current5AWithstood-voltage250VACContact modeNO/NCPoleSingle/Double pole optionalColorRed/Green/Yellow/Blue/White optionalBreaked materialPlastic filmCoverWith water-proof cover optionalDimension87*87*52mmWarranty1 YearProduct Feature:1.The manual call point use plastic sheet which can reused.2.Adopt plastic film instead of glass to avoid cutting the hand when alarm.3.The shape is rugged and durable,the shell is made of fire retardant materials, and the product components are resistant to high temperature and shock resistance.It is special design for fire alarm control panel and security alarm system.
