The company Imperial World Trade has been included in manufacturer and supplier of great quality ladle bricks from alumina stuff which is 50% to 85% for many years. The refractory bricks are made by the company have high repellent to acids. They also show protection to corrosion and oxidation while steelmaking process.
Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Item MC-10A MC-10B MC-10C MC-14A MC-14B MC-14C MC-18A MC-18B MC-18C MgO/% = 80 78 76 76 74 74 72 70 70 C/% = 10 10 10 14 14 14 18 18 18 Apparent porosity/% = 4 5 6 4 5 6 3 4 5 Bulk density/g.cm3 = 2.9 2.85 2.8 2.9 2.82 2.77 2.9 2.8 2.77 Cold crushing strength/ Mpa = 40 35 30 40 35 25 40 35 25 Modulus of rupture/Mpa = 6 5 4 10 8 5 9 7 4
Fused Spinel, AluminaMagnesia Spinel is ahighly recommended refractory raw material. Using our high-quality prereacted ALUMINAMAGNESIA SPINEL for developing high purity refractories in both monolithic and brick form. Our high quality Fused Spinel has high bulk density and great color. It has strong resistance to corroding and antidetonation. It adopts high pure MgO and Chemical Al2O3 to smelt by EAF. Application include but not limited to the proof of EAF, basic oxygen furnace, steel ladle, intermediate zone cement rotary kiln, etc. Characteristics: good temperature vibration, good strength and volume stablity in high temperature. Applications: They have been widely used in cement,glass,steel making and non-ferrous metal industries. MagnesiaSpinel Brickis widely usedfor glassfurnace,cement kiln,blast furnace,steel and non-ferrousmetal industry
Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries. Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.
We offer high quality refractory products and materials meeting the entire needs of our valued clients. OUR REFRACTORY PRODUCTS AND MATERIALS Induction Furnace Lining (Quartz) Induction Furnace Lining (Neutral) High Alumina Ladle Bricks and Blocks Magnesia Carbon Ladle Bricks and Blocks Magnesia Carbon Bricks for LRF High Alumina Bricks for LRF Porous Plugs Well Block Slide Gate Sets Tundish Lining Tundish Nozzles COPPER MOULD TUBES We supply Copper Mould Tubes manufactured by the topnotch manufactures of China. Sizes and Shapes Single Taper, Double Taper, Triple Taper, Multi Taper Square: 80x80 to 200x200 mm Rectangle: 150x180 mm to 250x300 mm Radius: 3 meter to 12 meter meter Length: 700 mm to 1200 mm Customised: shapes, sizes and material
Product: 92% alumina lining brick Specification: 40mm, 60 mm, 70mm highness Bulk density: 3.6 g/cm3 Wear rate: 0.12 Hardness:8-9 mohs Compression strength:2000 Water absorption:0.01 Color: white 150*50*40mm 150*50*60mm 150*50*70mm
Steel flow bricks are widely used in a variety of steel (including stainless steel, alloy steel) flat steel. Products with high refractoriness, good resistance to cracking and strong resistance to erosion. Appearance regular, drip smooth, accurate size, the full range. Production of steel ladle lined steel lining, curved lining brick, firing and not burning head brick, cast brick, brick and brick.
