Es505D Mini Round Sensor

Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the â??+(sun)â?? position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.

Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the +(sun) position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.

Diameter:m4, m5, m8, m12, m18, m30 Sensing distance: 0.8mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm Material:brass, stainless steel, plastic 25g

What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.

Stick on flat surface of merchandises, sensor could rotate freely Main parameter: Sensor size: diameter 28 x 15mm. Sensor type: micro switch Spring cable length: extension length in maximum Color: white / black LED alarm indication: yes Plug type: RJ11

FEATURES Suitable for 10A-200A cable online measurement. Holding wire diameter: 20mm Dimension: 52.5mm137.5mm28mm Load capacity: Installation: clamp type Output mode: lead output PARAMETERS Electrical parameters Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.1%, 0.2% Primary current 0 - 200A AC Secondary current 0 - 200mA AC (customized) Max. Cont. Input current 240A Load capacity 4 Over voltage category CAT III 600V Output signal (AC current) From 0 to 200mA AC at nominal input current Output signal (AC voltage) From 0 to 2V AC at nominal input current Frequency range 40Hz-2000Hz Dielectric strength 3KV 50Hz/60Hz at 1minute Temperature range -20C to +55C Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 600 V Standard EN 61010-1, EN 61010-2-032, IEC60044-1 Installation Clamp type Output mode Lead output(2.5m) Mechanical parameters Dimensions (L x W x H) (mm) 52.5 x 137.5 x 28 Weight (g) 400 Holding wire diameter (mm) 20 Max. jaw opening (mm) 20 Jaw color Red, yellow, blue, green, black Material PC+ABS+Polycarbonate, UL94 V0

Housing material:abs plastic Sensing object:10x10cm white paper / 20x20cm white paper Diffuse-pnp light on + dark on: Pa2p-d310800ip-c4w2(cable) / pa2p-d310800ip-cpw4(m8 connector) Diffuse-npn light on + dark on: Pa2p-d310800in-c4w2(cable) / pa2p-d310800in-cpw4(m8 connector) Through-beam mode-pnp light on + dark on: Pa2p-c31010mip-c4w2(cable) / pa2p-c31010mip-cpw4(m8 connector) Through-beam mode-npn light on + dark on: Pa2p-c31010min-c4w2(cable) / pa2p-c31010min-cpw4(m8 connector) Retro-reflective mode-pnp light on + dark on: Pa2p-r314000ip-c4w2(cable) / pa2p-r314000ip-cpw4(m8 connector) Retro-reflective mode-npn light on + dark on: Pa2p-r314000in-c4w2(cable) / pa2p-r314000in-cpw4(m8 connector) Retro-reflective mode(with polarizing filters)-pnp light on + dark on: Pa2p-f311000rp-c4w2(cable) / pa2p-f311000rp-cpw4(m8 connector) Retro-reflective mode(with polarizing filters)-npn light on + dark on: Pa2p-f311000rn-c4w2(cable) / pa2p-f314000rn-cpw4(m8 connector) Retro-reflective mode(for transparent)-pnp light on + dark on: Pa2p-t310700rp-c4w2(cable) / pa2p-t310700rp-cpw4(m8 connector) Retro-reflective mode(for transparent)-npn light on + dark on: Pa2p-t310700rn-c4w2(cable) / pa2p-t310700rn-cpw4(m8 connector) Connection: 1) 2m pvc cable 2) 4 pin m8 pico-style connector Weight(g): 1) approx. 42g(2m cable) 2) approx. 35g(4 pin m8 connector) Application: 1) smt equipment; 2) packing machines; 3) robots; 4) automation production line Standard exporting bags

Blue Jay Technology offers the industry's best selection of isolators. Dozens of models are now available to meet your needs. Select from single and dual-channel models with AC, DC, or loop-powered operation. Signal splitters deliver dual outputs from a single source. And whether you need a unit that sinks or sources current, Blue Jay has the right solution for you. Optical or galvanic isolation eliminate ground loop errors, reduce noise, and block high voltage transient surges. Our multi-channel modules reduce costs and save space. Models with push-button calibration simplify installation and maintenance tasks. Units with mini USB port preset for 4-20mA input/output required. Features ·Support universal Input Signal ·Provide 26...18VDC input loop power ·TC/RTD sensor broken alarm ·Low Temp. drift. Auto zero calibrating ·Loop Power current limitation protection (30mA) ·Over-current protection for input current (50mA) ·Current output can be set inverse proportional output ·Programmed by USB or adaptor ·w/o external power supply ·Back board designed with redundant power-supply interfaces

1.Image sensor:1/4 inch color cmos 2.Total pixels:656*492 3.Resolution:420tv lines 4.Lens angle:170degree 5.Mini lumination:0.0 lux 6.Power supply:dc 12v Contact abby to get more product information.